So I have looked around xda etc. Cant find a simple answer (hoping there is). So long story I am on a rooted Evo. I was trying to flash cm6 via rom manager. I kept getting error 7's. So I found the PC36IMG.zip followed the directions. I am now in bootloader. Tried (many times) to run nandroid. But it gives me the error while flashing boot image for all 3 backups.
I flashed Omega rom today for my galaxy note 2. It uses Aroma installer which i think could be the problem. Basically I cant boot into recovery. The rom is also very laggy where people on its development thread are praising it stability! The device will stay on the 'Samsung galaxy note II gt17100' bootscreen when i try to.boot into recovery.
Every time I try I get a 'boot failed' then 'error at line 390' installation failed, aborted etc. If I try to reboot it just sticks on the HTC incredible screen. I've tried using Rom manager and directly from recovery. Re downloaded files. Maybe related but any kernels I tried stick on the same screen?
I've got the rooted 2.1, easy. I've got all the java and adk and what not I got the flash_image and recovery.img. The command prompts all work fine till the last command, (I've tried 2 different chain of commands both work until a certain point).
adb shell mount -o rw,remount /dev/block/mtdblock3 /system adb push recovery.img /sdcard adb push flash_image /system/bin adb shell chmod 755 /system/bin/flash_image adb shell flash_image recovery /sdcard/recovery.img (After this one it says it cannot find flash recovery or image, cant exactly remember.)
- Open the Terminal and copy and paste the following commands with the phone connected to your computer. - adb shell [hit enter] - su [hit enter] - flash_image recovery /sdcard/recovery-RA-eris-v1.6.2.img (once again not found but I believe I followed correctly) this the end of commands the first half worked fine.
My Samsung Note 10.1(N8000) got stuck on boot screen at stock. No recovery only download mode. I don't know why, it was flat for about 2 weeks before I noticed.
Roms always and still flash successfully if I get the right version of odin, i think i have about 15 different odins from trying to fix this.
Things I've tried:
1.Flash stock rom 2.Flash custom recovery 3.Flash different versions of both 7+ 4.Re-partition and repeat 1-3 5.Wipe the memory and repeat 4 with many many roms
why my tablet stopped the first time and why no roms are working to recover it. What is happening here? Is it corrupt memory or motherboard etc hardware? Is there a god .pit file or god rom that could work to make something happen? What should i try now?
This shows a successful flash which had no effect on the tablet afterwards
I rooted my phone using erisuser1's rooting for dummies method - this went off without a hitch, I followed the instructions to the T. I put several custom ROMs on my SD card (using the USB, and properly ejecting the phone as a drive) including KaosFroyo v37 and v38, CELBFroyo 3.6, PlainJaneT2_V2, and Vanilla_Tazz_19.I tried flashing each of them (following the wipe of the system info and the Dalvik cache) and all but the PlainJane got stuck in bootloops that lasted a long time. I waited anywhere from 15 minutes to a few hours, and none of the others ever loaded up. I'm fine using the PlainJane and happy to have the other features of root but am wondering if there's any advice or suggestions as to why none of the other ROMs worked for me?
Every time I flash a different Kernel my Evo goes into a boot loop. I am using RA-Recovery, and wiping Data/cahe and dalvik before flashing. I flashed a new ROM and was able to install Kernel one time, any more than that and the Boot loop starts, even if i flash the first kernel that did work it still loops on me. I was on Clockwork and changed over to RA, that did not help, tried both BFS and CFS and no change. Tried Kingx 8 and 9, netarchys 4.18 and 4.19. I flashed 3.28.651.1 then netarchy's 4.1.9 and it started the BL, then reflashed 3.28 and tried kingx 9 and it worked, I'm beginning to wonder if there is something with netarchy's kernels that my Evo doesnt care for? I should add that this time when wiping i only wiped cache and dalvik and left the data alone. I suppose the only real way to find the culprit is to test out all the variables.
I have an eris flashed with PB00IMG and I believe I have root access. I am able to remove apps through terminal. I cannot get the google maps to update. I have removed maps.apk, htcnavi.apk and com.google.android.maps.jar. I have removed these separately and all together. I have been able to get it to update before, but I reflashed the PB00IMG because I could not get youtube videos to play without the stock browser. I got the youtube videos working again but cannot remember how to get the maps to update again. I wanted to try flashing different roms. I have downloaded a couple, placed them on the sdcard, and booted but I cannot get them to boot.
How to unbrick my one s. I can get into recovery but i cant do anything else. I have tried flashing multiple boot images from the bootloader but i get the same failed message every time i try to flash a rom. I dont have s off but i am rooted and supercid.
I've been trying to load amonRA's recovery for my nexus one. I've managed to unlock the bootloader, and gain SU permissions. But for the life of me,I cant seem to flash the new recovery image. I've used better terminal, and it says that theres no flash image found. But I have Put it on SD Card. I've copied the text correctly and I cant get it to flash. I've also tried to downgrade the radio to get better reception, and its saying that the update isn't signed. Is there something still locked up?
I just rolled back using simple root, and before I started flashing custom roms I wanted to flash Amon RA's recovery-RA-evo-v1.8.0.img. I've tried flashing through terminal emulator, and that didn't work. I also tried flashing through adb. I have confirmed that I have root, but it's telling me that there is no image found. Does anyone have any suggestions? Thanks in advance.
I am following the instructions on the stick from the complete root guide... and i get the the unrevoked flash part and it keeps on getting stuck on flashing recovry image do not touch phone and it just stays there... im not sure whats going on been tryin for a long time now...
For the past 2 hours I have been searching this site and reading about Rooting and Flashing new ROM's etc. and I'm still having trouble. I downloaded Cyanogen 6.0.0 and when the phone re booted it got stuck at the Cyanogen boot animation screen, and when I pulled the Battery and rebooted in to recovery I was able to restore everything and now the phone works again.
So first off, how long should it take after downloading a new ROM to boot back up with the new ROM installed? And how can I save the ROM in to the SD card? And when I go to DL Cyanogen it asks which home application I should use and gives me ADWlauncher and Launcher 2 as options.
I am using a rooted verizon LG G2. I rooted the device with ioroot 25 and installed TWRP 126.96.36.199 using AutoRec. (AutoRec - KitKat Recovery Installer - xda-developers, Here's a forum if you're unfamiliar with AutoRec)
Whenever I try to flash Cyanogenmod 11, TWRP says the flash is successful. I then go to reboot the device and I'm stuck in a boot loop of LG's logo. During the flash, TWRP mentioned that no MD5 file was found, which may or may not be related to the issue I'm having. During the bootloop, I booted back into recovery using the keys on the back of the phone and restored Stock LG KitKat. I've tried using multiple versions of CM 11, nightlies and snapshots. I'm stuck using TWRP 188.8.131.52 because AutoRec is one of the only methods I've had success with when installing a custom recovery.
Installed Flash Rec after trying to root my hero (following the guide stickied to the top of this forum) and its not giving me the button/menu item to flash it. My options are to Download Recovery Image (Grayed out) or Restore Backup Image which once clicked gives information 'Backup Complete'. How do I proceed?
I have already rooted my hero but I did not flash a recovery image or perform a nandroid back up mostly because I could not find clear instructions on how to do so, which caused me to have to completely wipe my phone and start over after I deleted some programs that caused my loop over and over. I know the commands I need to run in adb to flash the recovery image but I do not know where to download the recovery image or where I need to store it I also can't find anything on nandroid back could somone please explain these in detail with the steps I need to take so I don't need to start from square one again.
I rooted my stock 2.2 Evo a few days ago and have been loving CM6 on it. I had Clockwork Recovery 184.108.40.206 installed and finally got used to using it. I read that ROM manager was a nice graphical interface to CWR so I went to check it out. Unfortunately I couldn't do anything at all in it. Every time I tried to do anything it said I needed Clockwork Recovery installed. This confused me because it already was installed.
I would try to install it anyways, I would select "Evo CDMA" and then it would fail every time. I decided I would try to install Amon-Ra instead, and then just flash back. ROM Manager was able to flash Amon-Ra easily, but now still gives me an error every time I try to install Clockwork. I'm still new to the whole rooting scene and this is the first problem I've run into. Also, I already tried Fixing User Permissions.
I have been cooking a customized ICS ROM using dsixda's kitchen and all I done was deodex the ROM and add some other stuff like bash, nano etc. I then built and signed it. When I attempt to flash it tells me there is an error in the .zip file and displays (status 0). I am guessing I have done something wrong when building the ROM in dsixda's kitchen.
What a status 0 error means in CWM and how I can fix it?
So my pixcom tablet went bootloop and i flashed it ,it all went well until the flashing process, the progress bar show 15% and went 0% percent again. have tried all technique posted in the web but won't work. have tried all the Livesuite ver. (1.5-1.7). fail.what should i do?
I'm un-rooting my phone using OMJ's guide in the everything root related guide, and I'm getting a "Failed Flashing Process" error in RSD Lite.
I am running as admin, I have the correct drivers (I recently rooted...), I have the sbf in C: .... yet it fails.
The error says " Failed Flashing Process. Failed Flashing Process. Interface BP: Error flashing subscriber unit. Device API Error: 0xE0030009 Command: ADDR (0xE0231009); phone connected"
I am going to try flashing SPRecovery to see if I can at least get to a working point.
SPRecovery worked. It boots into 2.1 and has SPRecovery as the recovery. I still want to get it to stock, so I am going to try and download the stock sbf again (it doesn't have a checksum so I have no way of knowing if it is good or not...) .... here goes nothing!
I am on twrp recovery version 2.1.3 and to upgrade to 220.127.116.11 I used the Google .im app but even after the message showing that recovery was flashed successfully, when I reboot into recovery I still see the 2.1.3 twrp only..So I tried flashing it with terminal emulator but it didn't work.This error shows up every time failed scanning partitions failed with error : - 1
I tried putting the .img file in the root folder as well but it didn't work..I tried naming the root of sd card as storage/emulated/legacy, storage/ emulated / 0, /sdcard, etc but it keeps on giving this error every single time!