HTC EVO 4G :: 4G Connection - Obtaining IP Address?
Jun 4, 2010
I am right outside Chicago and have yet to be able to connect to 4G. I seems like the Evo is starting to connect to 4G, but then just sits with the message of "Obtaining IP address from Sprint". I have left it in this state for 30 mins, and nothing happens. Does anyone know if this is a fault of the phone, or maybe a lack of coverage?
View 23 Replies
Feb 23, 2010
My Hero was connecting to my home WiFi perfectly (for about 5 weeks) - yesterday it stopped connecting, now just says CONNECTION UNSUCCESSFUL?OBTAINING IP ADDRESS.
I have not changed any of my router settings/phone settings, so this is strange. I have tried deleting link and re inputting key (this worked once, but now no longer works)
My router is on the recommended WPA-2 setting, and is regarded as a friendly router for the Hero (Netgear 834dg)
View 3 Replies
View Related
May 16, 2010
wifi was fine at first but now when i turn wifi back on it says remembered secured with wps/wpa2 psk
obtaining ip address but then after a few mins says unsucessful this is with the phone next to my router!
also under settings - wifi settings i have no advanced tab to set my router time out? where is it?
View 10 Replies
View Related
Jul 9, 2010
After I reboot my Desire,it stay in "obtaining IP address from xxxxx" for a very long time,and will never finish this work. Why? Here is the Wifi software version and screen shot when it working.
View 7 Replies
View Related
Aug 18, 2012
Both of my android devicea, a razr and a galaxy tab 7.0 plus,are havingtrouble connectingto our wifi. the tab is on honeycomb, the razr on ics. assigning a static ip addressworks for about five minutes, then although the phone says connected, no connection works. during those 5 mins, i can browse the internet but cannot connect via dlna to other devices. when using dhcp dynamic ip address, it just cycles through obtaining ip to disconnected . i ued to use dlna daily, but no luck now, and the static ip is the only solution i can fimd online. This phone has used dhcp before, and theres no reason that it shouldnt be able to now. Both devices run standard roms.
View 3 Replies
View Related
Jul 10, 2012
I had to factory reset my router and now when i try to connect my phone to the wifi all i get is "Obtaining IP address".
View 9 Replies
View Related
Nov 11, 2009
Using a Linksys wireless router with a WEP encryption at home. Every time I try to connect my phone says "Obtaining IP Address" and then after a short time it fails.
-Yes, my phone recognizes the router.
-Yes, I have the correct key.
-Yes, I have reset my router and modem, no change.
-Yes, I have restarted my phone.
-Yes, my phone connects just fine to unsecured wireless routers.
-No, I cannot find another thread that has solved this issue.
View 15 Replies
View Related
Aug 25, 2009
I have a HTC Hero - T-mobile. Ok the problem, is i used to be able to connect to my wifi router no problem, its a netgear. "remembered, secured with WPA-Personal" and for some reason, it just wont get passed Obtaining address... So its connecting? but cant establish an IP?
View 8 Replies
View Related
Jan 5, 2010
I'm trying to connect my phone to my network so I can use wifi. I found my network and entered the correct password and it will say its obtaining an ip address but then after a few seconds it will say unsuccessful what am I doing wrong?
View 7 Replies
View Related
Aug 19, 2010
I installed wireless tether to test it out. Worked great. Now I am stuck on the aforementioned obtaining address. I've powered cycled plenty, removed battery, uninstalled wifi tether. Really don't want to a factory reset.
View 5 Replies
View Related
Aug 16, 2010
I have power cycled my phone, and router, reset my routers settings, even took off security so it was open, but whatever I do, my phone keeps saying obtaining adress
I have even factory reset the phone...
View 1 Replies
View Related
Sep 6, 2010
Dinc will not obtain IP....I just updated to 2.2 and it worked fine .....then i made changes to my router......turned all the security OFF.....
Does the Dinc hold old info on a current connection? if so can i delete a connection and start fresh....more than just "forget"? Should I name my Routers SSID?
View 3 Replies
View Related
Mar 21, 2010
I odin JC4 in galaxy, but I use wifi. That didn't connection WiFi. Because, it cannot be IP address.
View 5 Replies
View Related
Jan 23, 2013
I like to add addresses to my phone book in Android. As a lot of my contacts live in buildings i also like to add the floor and apartment number to the address: Looking like that:
Street and Number, Floor and Department number
Town, zip code
State
Country
Example;
Av. Whatever 12345, Floor 5-A
Buenos Aires 1007
Argentina
When clicking on the address the GPS of my wish opens , finds the country, city but not the street because of the additional Floor and department information. Without this additional information everything well with Google Maps or Sygic.
So, how should i add this additional Floor and department information to my address without the GPS has problems to find the main location.Also from ICS on there is only one filed to add the whole address not as with Gingerbread where you had a field for street, city, etc.
View 1 Replies
View Related
May 30, 2010
Just getting used to my HTC Desire, after reading your forum I was comforted regarding battery life and it seems much better now than the first few days.
I see another post on this but no answer, the address book only gives one line of the address is then any way round this? Even my first pda a Psion 3 had the option of which fields to display etc. there seems very little option to format what is seen, not that I am unhappy about the rest but to have to edit to see all the address is barmy.
Another thing way back then that still is not found is search all fields of the contacts, i.e. to find a number of someone that rang on another phone.
View 6 Replies
View Related
Jul 5, 2010
When I try to connect to 4g it says there is a network available but stays stuck on the 'obtaining ip adress' screen. I am located in Orlando which is one of the upcoming cities for 4g. Does this mean that the antenna is there but not yet strong enough or what?
View 13 Replies
View Related
Sep 2, 2009
I was hoping someone could give me instructions to obtain the *exact *source code for the current SDK. What I have so far is as discussed here; http://androidforums.com/android-developers/1045-source-code-android- By using commands such as; repo init -u git://android . git . kernel .org/platform/manifest.git -b android-sdk-1.5_r3 jar cvf ../android-src.jar -C core/java . etc. my issue is that the source is still inconsistent, some extra methods are available and some are not. For example, I want to make a progress bar with two sliders (To select a range) but the version of Progress bar I have; http:// android .git.kernel.org/?=platform/frameworks /base.git;a=blob ;.http://android .git.kernel .org/?p=platform/ frameworks /base.git;a=blob;> I cannot mimic (as an initial implementation), despite using the same package and extending View I do not have access to 'mMinWidth' for example. In addition the progress bar uses methods of the class StateList Drawable which are not available in this SDK (e.g. getStateSet(int i)). It's obvious that there's an inconsistency between the source I have and that which was compiled into the android SDK but I don't know why given my GIT repo commands. Can someone link to the version of ProgressBar which was shipped with android-sdk-1.5_r3? Has anyone managed to get the branch which maps directly to this release? This might well be due my inexperience with Git, please let me know if anyone has this set up correctly and I will try again. I seem, in all honesty, to have the head revision still.
View 6 Replies
View Related
Nov 3, 2010
Object getThisObjName= new Object();
I'd like to get the name of an object reference.
Is this possible via reflection in Android?
View 10 Replies
View Related
Feb 4, 2010
I have a HTC Tattoo (indian version). When I enable Wifi its not able to obtain the address from the router. If I provide a static IP it works fine.
This problem started after I tried to connect to a open network (may be). Before that it was working fine with my home network without providing the static IP in advance Wifi-settings.
View 1 Replies
View Related
Jul 6, 2010
I'm trying to develop a little game, with 2D Graphics. I want my "gaming board" to be at a specific position on my screen, so that I can display in-game informations above and below the box. But since there is beginning to be a lot of Android phones out there, I was thinking about getting "dynamic" values so that I can adapt my font size to every device.
My game is not in full screen (but it could be, it's no big deal), but in a window with no title bar.
I'm using an extension of the default SurfaceView class, implementing SurfaceHolder.Callback. I tried writing the following method :
CODE:................
But the values returned are zeroes.
(even if it means changing display strategy) ?
View 1 Replies
View Related
Dec 31, 2009
I am trying to decode and obtain all frames in a video stream, each of which would be processed by a native signal processing engine and re-encoded back to a MPEG4/MP4 file. I noticed that there was a getFrameAt() function in earlier versions of SDK but its not available in v 1.6 on which I am working. As I am fairly new to Android, I would like to know from more experienced people around here as to how I can extract video frames into a buffer for processing.
View 2 Replies
View Related
Mar 26, 2010
I want to obtain the index of the selected item in a spinner.
I am aware of the method getSelectedItem() which returns the item selected (which might be a String). But i want the index of the selected item.
Something equivalent to the setSelection(index) to set the selected item.
Of course I can get the selected item and compare it against the array of items to obtain the index, but I hope there is a better way of doing this.
View 2 Replies
View Related
May 4, 2009
How can I get/calculate current process CPU usage? ActivityManager provides method that returns a list of all active processes (list of RunningAppProcessInfo), but that class doesn't provide any CPU usage information.
View 10 Replies
View Related
May 18, 2009
Is there any way to programmatically retrieve data that reports on application usage as shown in the Spare Parts application? I know what calls need to be made, but it seems that they all use internal APIs...is this true?
View 2 Replies
View Related
May 14, 2009
Is there a method of obtaining the field of view for a phones camera (horizontal and vertical)?
View 2 Replies
View Related
Nov 24, 2010
I can't find a tutorial online that gives me the step by step process on how to generate a suitable key using the keytool in the JDK.
This: http://developer.android.com/guide/publishing/app-signing.html
Talks about it and gives commands, but it doesn't actually say where and in what folder to key in the commands. I am sure I am missing something easy here, but could anyone guide me to where I need to start with this?
View 1 Replies
View Related
May 24, 2010
I have following code:
CODE:...........
Code is working but here goes my problem: when I call it from main activity in this way:
CODE:........
Then i can see 10 times result of 'doing sth else!!!' and when loop is over i can see then result from activity. So sensor activity waits for some reason and then when main activity has nothing to do, sensors are doing their job.
of course I have well implemented: onActivityResult(int requestCode, int resultCode, Intent intent)
I want to read sensord data directly, not using listeners, is it possible?
View 1 Replies
View Related
Aug 18, 2010
Now that SENSOR_ORIENTATION is deprecated, what's the best practice for obtaining compass reading? The old way was so simple.
View 1 Replies
View Related
Apr 7, 2010
I have a problem with my Wi-Fi connection. I turn on Wi-Fi, go to Wi-Fi settings and under the list of found networks is my home wireless. When I try to connect to it, it goes as far as "Obtaining IP adress" and after that it fails. I thought this was because I was using GalaxHero, but now I went to using Mustymod's 2.0 and the problem is still there.
View 23 Replies
View Related
Dec 27, 2009
I just got a new behold II and i love it but there are some problems for which i need your help
1)the phone keeps jumping out of mass storage mode every 2 minuted after i mount it and so transfers get canceled in between
2)wifi does not work it sometimes gets connected to the router and sometimes just says "obtaining IP" and when it connects i cannot access internet. (but it somehow worked once i dont know how)
3) I have to send a message twice to certain people the first message always does not get sent
View 3 Replies
View Related