HTC Droid :: Way - App For Aris To Read Room Temperature?
Dec 19, 2009
Is there a way or an App, for the Eris to read the room temperature. I see that it displays battery temp., but I would like for it to show me the current temp. right where I'm at, not just the temp. on the outside from a weather app.
was able to install on another Froyo rom, no I don't remember which. How much room does SWYPE need? editing this in (from post below) to get it read by more eyes: I did uninstall a bunch of fluff I was thinking of getting rid of anyway.
I installed the 2.1 deskclock because the 2.0.1 was just too bright. Last night i put it in my multimedia dock. However there is no weather. It just says "weather temperature unavailable". I went into the settings and the weather settings is defualted for my zip code. it does show my location and temp. I done understand then why it does not display temp in the dock.
Yesterday I rooted and installed the new Bugles Beast. While using the wifi tether app today, I noticed my processor getting fairly warm. Concerned, I downloaded TempMonitor. Without any overclocking at all, my processor was consistently running at around 44*C/111*F. The battery temperature hovers around 27-38*C. Why does my phone run so hot? Should I be worried? Some people have said the processor in the droid can handle temps approaching 100*C (!!!), is this correct?
When i get an email (gmail) and I attempt to download the rest of the message, it gives me an error and tells me that there's not enough space and instructs me to delete messages. After deleting almost all messages, i still get the same error.
Do the messages get stored on my card or device? SHould i delete my podcasts that rest on my card?
I am torn because tonight I went into BB to look at a Evo to replace my wife's 2 year old and pretty worn out non-smartphone. My wife immediately said she wanted it and left me to play with the demo.Now I am wondering if I should be keeping my iPad...I want the Evo! But I love the iPad. I have been carrying it everywhere...even into grocery stores and restaurants. Took it to several doctor's offices yesterday...it was awesome. I want to mount it in the car. I am much more likely to go mobile with the wife and sit around and just wait on her. Today I worked out at the gym on a treadmil and browsed a magazine...will need to go back and read a couple of articles that I could only look at the Picts and large captions while running. Next time I will try an iBook that allows super large text. But time flew by quicker than it ever has and I hate working out at the gym...so this was really cool.I just want to be more efficient. I want my stuf online like docs and todo items and notes, etc. I am so frustrated with multiple devices and content everywhere.Is there room for a Evo and an ipad? We would have to pay more except that right now, I am paying for unlimited 3G so if I dropped the iPad 3G, it might be pretty close. I had planned on staying on the $15 plan most of the time...but AT&T pulled the fast one of the century. I currently have a Palm centro with ok tethering through dial up (hey it works when there is no 3G).
If I get the Evo, what would be come of my iPad? I already sold my first week purchase of the wifi. Would I really sell my 3G pad after calling BB 5x per day for 3 weeks? I have used the iPad for 3-6 hours per day for almost 2 months now. But a lot of that time has been here on this forum...and in getting the devices setup...which both have been very time consuming.
I need to create a map with items on it (the map consists of a drawable object, which represents a room) and I thought about using buttons with background images for the items so that they are clickable.
I guess the AbsoluteLayout fits here the best, but unfortunately it's deprecated. What layout would you recommend me for this kind of application ? Is there another layout which supports X/Y coordinates ?
I've been doing a lot of searching and I know a lot of other people are experiencing the same OOM memory problems with BitmapFactory. My app only shows a total memory available of 4MB using Runtime. getRuntime ().totalMemory(). If the limit is 16MB, then why doesn't the total memory grow to make room for the bitmap? Instead it throws an error.............
My last phone was a Nokia N86 8MP. Like the x10, it to had a 8.1 MP camera. Unlike the x10, the images on the Nokia seemed a little clearer, but what really sets the Nokia's camera apart from the x10's is the flash. I recently tried taking a photo with the x10 in a dark room, although the photo light seemed bright, you couldn't see anything past 5 ft, the same applies in video mode. With the Nokia that was never a problem, the flash was bright enough to light up the entire room and so was the video light. I suggest, if it's legally possible, SE have it's testers look at the Nokia N86 8MP and borrow, if not improve upon their camera, flash and video setup.
What is your average battery temperature? When in use (surfing the web, etc.)? It seemed like the first few days my unit stayed pretty cool but now it is getting a little warm after only a few minutes use. It can get as cool as 28C when not in use, but has gotten over 40C with lite surfing/use. Normal?
I have looked at all my apps and nothing seems to be running out of the ordinary. The only thing I am not sure of is in the app "spare parts" under network usage I have a top bar that says "0" and it is full. When I try to click on it for more info it force closes. Does everyone have this (is it normal) or is it something I need to check into further? Anyone know?
I have a fully stock, most recent OTA updated EVO. Lately I can't tell what the temperature is because my weather widget has become bogged down with clouds or sunshine, rain, thunder, etc. icons over the temperature. I can't take a snapshot to post.
My Incredible's battery was at 35 degrees Fahrenheit at idle. After playing some music via wifi using Radio Time for an hour, the temperature was 109 degrees Fahrenheit and the phone was warm. Now I know the temp would go up, but is is this abnormally high? Is this normal? Do I have anything to be worried about cause I love this app and don't want to stop using it.
I'm trying to obtain the battery temperature, the battery voltage and the battery current. The return value of the code (see below) for voltage and batteryTemperature is always 0 while the others work. I would like to know if there's any other way of obtaining this information and how. Finally, I couldn't find anything in the API for accessing the battery current... Is there any method to know its value? Code...
I have an HTC EVO. Today I accidentally left it in my car for about 2 hours in the blistering Florida heat. The phone was fine but I wanted to know if it had a temperature sensor. And if so, how do I find out the internal temperature of the phone?
And what is the temperature threshold before it damages?
Ok, so i got sick of using beautiful widgets weather home widget, but i didn't find another weather widget i liked. So i was playing around with the setting and clicked the show temperature in notification bar. I figured it would go away once i deleted the widget off of the home screen, but nope it stayed, now i've got the temperature over in the left hand corner. Now sure if anyone else has done this but i thought it was pretty cool. Here's a pic so you can see it, it has been updating throughout the day.
I'm using Evil Eris 3.0, but all the dates are in the European format (day/month/year). Is there a way to change that to (month/day/year)? Also, temperatures are reading in Celsius when I would prefer Fahrenheit. Is there a way to change that too?
Can anyone please tell me the name of the app in which you get between a four and seven day forcast as a widget. By that I mean, say for instance the whole week looks like it'll be sunny, the widget will have 4 to 7 suns going across your screen with, I believe, the temperature to each day on the corner of each sun?
Anyone having problems with accurate temps shown on the home screen. Mine were right on but today they are off 4-5 degrees if I use Accuweather or switch to Google Weather. Have refreshed and rebooted to no avail.
I was wondering if anyone knows how to fix this problem. My temperature is not correct, it says its 13 degrees out and its in the 60s. Is there a way to fix this or should I just uninstall and reinstall.
I have an idea about using an old phone to tell me the temperature at a remote location. I need to know when a greenhouse or any remote location approaches freezing by sending an alarm to my computer or another Android phone. I thought about something similar to remote GPS locating but getting the temperature data instead of the GPS data. I could just leave my old Android phone in the Greenhouse. I know absolutely nothing about App development, I started to look at the SDK but first I needed to know Java, BASIC is as far as I ever got on a BBC.
I trashed the pre-installed weather widget and downloaded the Weather Channel widget, but it's not refreshing the temperature. This is the same reason I got rid of the pre-installed version. Anyone know why this happens? I also have Advanced Task Killer, could this be the culprit?