My aim was to upgrade to froyo. I set up my GoldCard. I then upgraded the RUU to the following with no problems RUU_Bravo_HTC_WWE_1.21.405.2_Radio_32.36.00.28U_4. 06.00.02_2_release_126984_signed. Now my phone boots with no display, I hear the boot music and the phone is seen by the RUU upgrade if I go back in but no display.
I have last night updated my X10i through SE US to Android 2.1. Following from here I cannot get past the boot screen, it switches on, but stays blank and does not do anything else. I have tried to re-install / repair through SE US (PC Companion does not work in this case) to flash it once again, and also that did not help. It keeps telling me that everything is fine, and I should just switch on my mobile phone.
The thing is that time to time my device does not respond to screen touch. For instance: then there is an incoming call it stays blank and I can not see who is calling and at the same time not able to answer it.
Touching the screen does nothing, only after pushing hard buttons, I am able to terminate the call. Also, when I am trying to access the OS from sleep mode by pressing the power button--there is no home screen--it stays blank. The only thing it does---the lights go on the home, menu, back and search buttons.
I did contact ot HTC help service and they told me to try to use the device in safe mode for two days. (this should terminate all 3rd party applications, that might cause the issue). Its my first day that I am use is in the safe mode and so far I do not experience any problems.
I do suspect that the reason of my problem could be the task killer that I am using in order to eliminator some programs running in background. But I did try out several task killers so far, however the issue remains the same
I have an HTC Desire and I managed to break the LCD. I had the LCD and touchscreen replaced (don't ask long story) and now I have the following issue: When I make a call and even before I lift the phone to my ear the screen goes blank. None of the buttons work but the call is fine - I can be heard/hear the other person. When the other person ends the call the phone bips to tell me the call is over, but the screen stays blank. I can re-activate the screen by receiving a missed call - ie calling my phone and then hanging up re-activates the screen. In addition, when my phone rings the screen is fine, but as soon as I answer the call and lift the phone to my ear the screen goes off as before. The only other way to bring the screen back is to remove the battery. Whilst the screen is blank I loose all touch-screen capability too. Everything else on the phone works perfectly, sync to email, text, GPS, camera, internet etc all not a problem.
Had a HTC desire now for a couple of weeks and Ive come across an annoying problem, when I make or recieve a call and raise the phone to my head the screen goes blank which in it's self is fine, but after the call has concluded the screen remains blank and there appears to be know why to get it to leap back into life ive tried moving /jiggling the phone and pressing all the buttons including the power, the only way seems to be to remove the battery and force a reboot. Anyone else experienced this or have any ideas that might help solve it?
On the Desire home screen I have a clock with what should be the weather info underneath which is the standard home screen.The weather info is blank apart from the name of a nearby village which i believe is where the nearest phone mast is located. (the picture on the box the phone came shows Barcelona with lots of weather info).If I tap on the blank area next to whe name I get the weather screen opening up with the name of the village where the mast is, and the word "current" in brackets next to it and the info is all showing "0" if I update it the message appears "no weather data available".I can chose another location (various pre loaded or choose Manchester UK by searching ) then choosing my desired location which then shows data.When I return to the main desire home screen the village name is back under the clock with no weather info.I guess the HTC is trying to get the weather data for the mast location nearest my phone as a default setting, I dont know how or if I can override this so that I can have my desired location (ie Manchester uk) wether data showing under the clock on the home page permanently.
I'm writing this for my girlfriend, but I have observed it first hand I'm not just going on her word. (I'm in IT - I understand people make simple mistakes.)Every time she power cycles the phone, specifically when it powers up - it sends a blank text message to one of her contacts, the same one every time. Needless to say *her ex* is getting tired of it.Since the recent update it's now sending blank messages to 2 of her contacts. Has anyone else experienced this? How can I help diagnose the issue?
So I rooted my desire using the r6 guide from MoDaCo. Worked well, no problems. Recovered my personal data and apps, set my alarm went to sleep. Alarm goes off, get out of bed and all still fine. Then, I decided to apply apps2SD picking up at the end of Lekky's guide. Followed it word for word but once complete, it wont boot past the HTC boot screen (the white screen with logo).
I am going to try and reapply the rooted ROM (if I can get my blackberry to turn on to write to the goldcard). But, does anyone have any idea what could have gone wrong? I really want apps2SD, but this could all go pear-shaped again. Are there any other tried and tested methods to get apps2sd on a stock superuser ROM?
I've rooted my Desire on o2 have version 0.80 of the boot loader. I applied the defrost rom version 2.7 following this guide. Droid Den - Phone Guide: How To Install Rooted Android 2.2 On Your HTC Desire - Droid Den. It went through applying the ROM but now I just have it stuck on the o2 splash screen and going no further. Can't seem to find a backup.zip anywhere on my ROM and thought to back out the change. What's the best way to go? Re-flash again?
i have tried to install kitkat version for galaxy y duos s6102,for that i installed clockwork mod n cynogenmod n kitkat file..but after installing the screen goes blank,nothing appears except Samsung logo screen,
This was reported in the other thread about X8 Issues, but thought to start a new one to gather feedback from users. It's about the ''black screen'' freezing issue encountered by some users. I have had this several times since owning the phone for a few weeks, so it is a recurring issue. Problem: The phone hangs or appears to be shut down or become unresponsive suddenly. Pressing the hardware buttons doesn't help as the phone doesn't react at all. Solution: Take out cover and battery and restart.Observations: From my own observations, it's not actually a shutdown but a major freezing/hanging. Sometimes when it happens, I can still see vague shades of the display at an angle. After leaving the phone for a while in the pocket, the phone comes back to normal again. Not sure if this is true for all users with this problem. Anyway, gathering more feedback to see how prevalent the problem is, to evaluate whether I should take it to the SE service centre, or whether doing so will help at all.
I have a big problem with my Galaxy S immediately after upgrading to the JPM/Froyo firmware. Immediately after the update the phone attempted to reboot, and now stays on the Galaxy S logo way too long before the screen goes blank and only the bottom two buttons are illuminated. And it just stays like that. I have a feeling that it might have something to do with the OneClickLagFix that was installed on the phone; maybe the upgrade didn't like the lag fix being there. Also, on pressing VolumeDn, Home and Power to get the recovery screen, the screen is replaced with a yellow "Downloading. Do not turn off Target!!!" splash. So there are no recovery options.
Instead of seeing the boring old Android logo or my service provider's logo, I'd love to see the standard text-based Linux boot screen that shows the status of all the hardware and configuration info as my phone boots. My current phone is an HTC EVO 3D running Cool ICS with Sense 3.6 and Revolutionary CWM.
I went to reboot my Droid because it was lagging a little and when it came back on it go stuck at the Cyanogen boot screen. I pulled the battery, put it back in and held the X to boot in recovery and my recovery won't come up either. It just skips right to the Motorola M and if it doesn't get stuck there it goes back to the Cyanogen screen.
I haven't made any changes to the phone at all so I am completely puzzled on why this is happening. I obviously can't take it back to Verizon since its rooted so if there is a way to fix this I really want to because I love my phone and my wife will kill me if it is screwed up.
Some background info: I got an HTC Evo a few days after the initial launch. I had no problems with the screen at first at least for a few weeks. Then all of a sudden, the screen would go blank after I took the phone off the charger, or would finish a call, and a few other instances. After dealing with that for a little over a week, I took the Evo back to sprint and got a brand new one. I looked all over the forums, but could not find any answers. I know some others are having this issue, but it doesn't seem that widespread. So I get the new phone, and for the first day, I don't install any of the apps I had on the last phone because of a lack of time. No problems to report the first day of use, so I think I'm in the clear. The next day I start installing all of the apps I had on the first Evo, and bang, it starts to happen again. The screen goes blank, and I can do nothing to turn it on except to pull the battery out and restart the phone which is a monster pain. After all of this, I have to think its a software issue. Some app I have running could be causing this? How likely is it that 2 Evo's have this exact same problem, and that it's hardware related? Here is a list of apps I have installed on my phone: maui9111's Apps on the phone. I tried uninstalling several of them, but still can't find the solution. Anyone have any ideas? I love this phone, but this issue is driving me nuts!
Just upgraded my wifes X10 mini (unbranded UK version) using the SE PC Compaion. Followed all instructions etc, but its now stuck in a boot loop, restarting just after the full screen coloured animation "spins" into the SE logo and text.
When I make a phone call the screen goes blank after 5 seconds. To end a call, I have to press "home" then "end call".Is there a way I can keep the screen on whilst making a call?I have tried home, menu, settings, then sound & display, without success.
I have a problem with my magic which is about 4 months old, When i switched the phone on the Vodafone logo and Andrioid logo appear BUT after this the screen goes blank, if you look from a certain angle the screen looks like its on and glowing white.
So I have had my Evo for about 2 weeks, and all of a sudden when I am in an app, then hit the home button, I am presented with a blank home screen for sometimes up to 15 seconds then all of my widgets and icons appear. It is actually quite annoying now that it is doing this almost every other time I go back to the home screen. It even happens when I hit the back button sometimes to get back to any one of my 5 home screens.Has anyone else had this issue?
First of all. So I picked up my EVO a couple of hours ago. I was messing around with it, and switched the camera to the front one, which has now caused the screen to be blank, just black. None of the buttons function when it's like that, except the home screen. Please let me know if anyone knows anything I can do about it tonight.
My Desire has suddenly stopped recognizing my 4GB SD Card today. Just says it's blank and needs formatting! When I try to access the card via my PC it just wants to format it but when I bring up the format window the PC only sees 30MB and a format of FAT. The Properties show it formatted as RAW. The Error Notification I get is: Blank SD Card - SD Card blank or has unsupported file system. Is my card fried or is there a way out of this?
I own a hero on orange with the latest orange firmware. Over the past couple of days I've been having a few problems, mainly with my messengers from what I can see. Sometimes when using ebuddy or meebo, my phone's screen will go to standby (blank) as normal but will not wake up or do any functions. I have to take the battery out of the phone and reboot. I tried re-flashing the firmware just incase but it still does it. I'm trying out hi msn to see if that is any better. Just wondering if anyone else has had this problem and also does it sound like a firmware issue?
I just upgraded to HTC Magic from Vodafone UK and I love it, but I seem to have a problem with the calendar app. When I load it I just get a blank (white) screen. The context menu button had no effect (apart from greying out for a few seconds) and I just have to exit the application. As I have always had Nokia before now I assumed that the app would still load a calendar and allow me to add appointments, to-do's, alarms etc.I have NOT tried to synch with Google as I use Outlook and was hoping to synch with that. Does anyone have any idea what could be wrong with the Calendar?
I have successfully rooted my Dinc 2.2 using unREVoked but recovery mode just gives me a blank screen with white bars down the sides. The buttons and trackpad do not have any effect. Only way I can get out of the blank screen is to pull the battery. I have ROM manager premium and it says Clockwork 220.127.116.11 is there and the clockwork folder is on the sdcard. I've tried re-flashing Clockwork several times from ROM manager. Everything else works fine.
My app has one activity and one ContentProvider, the activity is simple in that it's just a splash screen at the moment with no other logic in it (I do intend to have more activities in the app). The ContentProvider uses SQLite as a back end and loads some static data from files on first install, a slow process due to file sizes and database initialization. My problem is that I want the activity to show up as soon as the install starts and maybe display a progress bar or dialog to show the user progress about the install. At the moment I get a blank (white) screen while the ContentProvider is initialising the data which takes quite a long time and I get "Activity idle timeout for history record" warning in LogCat. My splash screen only shows when the Content Provider is done, from the app standpoint this is undesirable behaviour. One potential solutions would be to manually start the provider via an AsyncTask but I have a feeling that this is a bad approach due to the fact that if the activity is interupted and restarted while the install is underway and a new AsyncTast is created through the activity's onCreate() then I'll have worst problems on my hands. Is there a way to start the content provider in the background and display my splash screen activity straight after the app is started? Note that this problem is only an issue on first install.