General :: Unbrick NEO N003 MTK6589T - SP Flash Error 4032?

Jan 27, 2014

NEO N003 1/4g T13

I have flashed to newest Stock room from the website neo then i try magerto room he was fine as the beginning then after 2 days he start freezing and sometimes working then the camera is no longer working i tell my self its just poor room

i decide to use the stock room but after i flashed work normal for 10 minute then freeze the screen turn black utile you remove the battery and put back in 2 minutes after many times trying to flash it by sp flash tool i hit format ...my imei is gone and no signal on the sim card ( thats not a big problem)but the phone still freezing and restarting ...black screen ......after that the phone not able to turn on even the logo just black you can see he is trying turn on but no logo no nothing

in the device manager detect MediaTek Usb port before was detect preloader MediaTek somthing ......
look at the picture and the sp tool not working MediaTek Usb port and i got this error

this Morning accidentally i put the phone into Preloader Mode and make normal flash and my phone is a live a was very Happy i went to write the imei must root the phone...i have install root programe name is geno (he is work fine on lenovo P780) but in neo N003 he just freeze and tun off and no longer can trun it on again just black screen.

Now when i plug the phone via usb port windows detect it MediaTek USB Port how i can put it again in Mediatek Preloader VCOM ???Always get error 4032 on sp flash tool (format , upgrade, download) all he same error

General :: unbrick NEO N003 MTK6589T - SP flash  Error 4032?


ADVERTISEMENT

General :: Galaxy S4 MTK6572 Alps Clone / Error 4032 When Trying To Flash Or Anything

Dec 23, 2013

I bought an S4 clone, Manufacturer alps Model GT-I9500.

I tried with ALL ROM i found, and with GT-I9500_MT6572_ALPS-JB3(fix) ROM without success Even when i wana format or do memory test i get

Code:

BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM fail

View 4 Replies View Related

General :: Galaxy S4 MTK6572 - Error 4032 (Enable DRAM FAILED) When Trying To Flash?

Sep 16, 2013

My phone is dead after I flash a wrong preloader my phone model is alps GT-I9500 mtk6572 . I try with ALL ROM on needrom.com with keyworld "alps" "GT-I9500" "mtk6572" ... about 20 ROM but I get Enable DRAM FAILED for each try

Use case :

1- Disconnet the battery and wait 10 seconds

2- Open flash tools with the scatter file

3- Connect the phone usb cable to pc

4- Plug the batterie on the phone
==> MTK USB PORT (COM XX) ok : drivers on the pc seems to be ok

5- On flash tools press download
every time I get BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM fail

on the web they say the cause is the wrong ROM but I don't know (I try over than 20 ROM)

View 9 Replies View Related

General :: Porting MTK6589T Rom To MTK6589?

May 6, 2014

After knowing that the mtk6589t rom can be ported to mtk6589..... i have started porting one..!!! But after porting it as i regular do... it gets stucked on boot logo..!! it dsnt go in boot loop but gets stucked on boot...!! what shld be done?

View 4 Replies View Related

General :: Rooting And Installing CWM On Jiayu G3S MTK6589T 1.5Ghz Phone

Aug 19, 2013

New to rooting etc. Have ordered a Jiayu G3S MTK6589T 1.5Ghz phone and wanted to get the phone rooted and CWM installed so I can back up the existing ROM and try some new ones out.

Have seen guides for the G3 with the older 1.2Ghz CPU and also some other phones with the MTK6589T CPU but was unsure if these would work or brick my phone etc.

G3S or has rooted one and got CWM installed successfully. I usually go for CyanogenMod or a simple stock ROM

View 1 Replies View Related

General :: (MT6575) SP Flash Tools Checksum Error

Dec 5, 2013

have an iBall Andi 3n here. Runs on MediaTek MT6575 SoC. Getting this error while flashing stock rom.

View 1 Replies View Related

General :: Darktremor Get Error After Flash Another Custom ROM Update?

Feb 18, 2012

I've been using darktremor and a2sd GUI, but after I flash the phone GUI a2sd get an error.

A2SD exiting the GUI:
A. your device is not rooted
2. Script A2SD Could not be found
3. EXT no partition found

What should I do?

[Solved] must to mount data, system and ext when you flash a2sd, or if you get a2sd error after flashing custom room take a try to flash new a2sd script..

I use CM7 RC5.5 for galaxy Mini - SquadZone Version

View 1 Replies View Related

General :: Error Fastboot Flash Recovery Due To Reboot

Jul 1, 2012

I have an AT&T Atrix 4G and I wanted to imstall CM7.2.

I had the latest Atrix Android version on it. Then I followed the instruction at the cyanogemod wiki for the atrix. So I flashed the sbf (cyanodenmod wiki -> Motorola_Atrix_4G:_Full_Update_Guide).

The rsd lite flashing didn't succeed because the atrix rebooted and the programm couldn't switch into BP passtrougth, or so. At this point the device said something about 0x1000 no bootloader, but I could choose between rsd, fastboot and the other possibilities.

I booted into the fastboot mode and did an oem unlock. Now it says unlocked.

I booted again into the fastboot mode, and now it should be a simple

Code:
fastboot flash recovery recover.img

But:
Windows) it always says:

Code:
sending 'recovery' (4824 KB)... OKAY [ 0.453s]
writing 'recovery'... FAILED (status read failed (Too many links))
after that the device reboots and is in a boot loop

so i tried linux) The first time i tried the command everythings worked fine, but after reboot i chose.

Code:
android recovery mode, but after a while (secs) the device rebooted.

so went to fastboot again, but now the device reboots after the sending command and then it says writing failed because of no device

I don't know if when I am using rsd lite to flash a complete image the phone reboots again and i have a hard brick.

View 2 Replies View Related

General :: Unable To Flash Custom Rom Due To Error (status 0)

Sep 29, 2012

This is the first (and only) time that I have try to root my phone (with the AAHK). After alot of reading I managed to ROOT my Desire HD and it says S-OFF.

The problem is that I am not able to install a costum ROM. I have tried the following roms:
1. Android_Revolution_HD-4G_6.3.3
2. TrickDroid_v2.0.0_C2

And I allways get the same error. It says status 0. I found in some other threads on XDA-devoloppers that the problem is: "Wrong update-binary".

Software information:

Android version: 2.3.3
HTC Sense version: 2.1
Kernel version: 2.6.35.10-gd2564fb
htc-kernel@and18-2#1
Software number: 2.50.405.2

View 1 Replies View Related

General :: Flash Image Recovery Gives Error Scanning Partitions

Nov 1, 2011

Current issue is that I my phone will boot just fine into regular startup however it will no longer boot into recovery mode.

I have tried the below methods but the main problem that I run into is that when I issue flash_image recovery /sdcard/recovery.img(I have tried multiple img files such as the clockworkmod and SPRecovery) however none of them have worked they are receive the below message.

# flash_image recovery /sdcard/recovery.img
flash_image recovery /sdcard/recovery.img
error scanning partitions

What I need at this point is either a way to get some form of recovery loaded either the out of the box version or clockworkmod version working so I can flash my phone and get gingerbread loaded. Or I need to break the OS to the point where the phone will not load past the boot loader.

Phone information:
Droid 2 Global
System Version 2.4.330.A956.Verizon.en.US
Android Version 2.2
Kernel Version 2.6.32.9-g9e2c63d

What I have looked at so far: [URL] .....

View 2 Replies View Related

General :: Spice Mi-350 Phone - Google Maps Error After Rom Flash

Jan 9, 2013

I'm using a Spice Mi-350 phone (It is the same as Lenovo A60). On the stock Google Maps worked perfectly. But recently i flashed Yonip 5.3.7 Rebirth ROM. Since then Google Maps does not work anymore. When ever i open it, it says 'This application requires a working data connection'. I have a fully working data connection and every other app on my phone can access the internet except for Google Maps and it's related apps(like Navigation,Places,Local,etc).

Here is the download link for the Yonip 5.3.7 Rebirth ROM. [URL] .....

View 8 Replies View Related

General :: Eboot Error (16008) In Smart Phone Flash Tool (Micromax A25)

Feb 17, 2013

how to fix this error... i also create a new scatter file of my phone.. but nothing works..

Error is

EBOOT ERROR : (16008)

[Android Partition size changed!

[HINT] Partial images download error

View 1 Replies View Related

General :: Fastboot Flash Boot - Data Transfer Failure Unknown Error

Mar 1, 2013

I used insecure boot and root trying to root my phone, which was a huge mistake as i noticed a few minutes later since i cant startup anymore and only get into bootloader.

Now I'm trying to flash my stock rom back.

My CID is VODAP102 and my Version is 3.14.161.27 so i downloaded the rom and tried "fastboot flash boot boot.img" the result is:
sending 'boot' <8192 KB>...
FAILED <data transfer failure <Unknown error>>
finished. total time: 0.158s

View 5 Replies View Related

General :: How To Unbrick MT6577

Apr 11, 2013

how do I unbrick my MK6577 (Noir A-8) I tried to use SPTool to install CWM but now luck need ROM files to flash it through SPTools.

View 2 Replies View Related

General :: How To Unbrick WM8850

Sep 27, 2012

i'm trying to root my (chinese) tablet (like title). i've used nanospic.ro page_id=12[/url] WM8850 RootBurner v1.1.0.

So i put files into sd and reboot tablet. After the text "root complete" i removed sdcard and my tablet opened. I knew immediately that I could not access the to settings cause the icon was passing and text becomed com.android.settings. when i try to open it, an error message. So i try another time to root device but it won't open itself.. i turn on it and remain on loading gif..

View 3 Replies View Related

General :: How To Unbrick Alcatel OT-906

May 24, 2012

I have an Alcatel OT-906 but I bricked it.

I need to rescue it but I don't find any ROM to this phone or some way to repair it.

Is totally bricked

View 2 Replies View Related

General :: How To Unbrick Padfone 2

Feb 19, 2013

The terminal was mistakenly brick while I introduced changes to the file build.prop. Now the only way to turn on, is flashing the firmware again (putting the original file from fastboot does't work). I wanted to know how to transfer the firmware zip file to internal memory because the device is not recognized as FTP.

View 1 Replies View Related

General :: How To Unbrick Prada 3

Mar 12, 2013

my prada 3 is brick

View 2 Replies View Related

General :: Unbrick Micromax A90s

Jan 23, 2013

Actually I am in a deep trouble, I bought Micromax a90s a month ago , It is really a very good phone. I rooted it and was very happy but 1 day ago I was trying to add new fonts to it & It got bricked I don't have any backup.I have no sources to send it to service centre. how can I repair it myself, Unbrick ?

View 1 Replies View Related

General :: How To Unbrick Galaxy Y S5360

Sep 20, 2012

i was using repencis rom and i tried to flash jelly blast but something went wrong and i bricked my phone i am not able to access my recovery and when i try to flash stock rom via odin it fails i used different firmware packages but i did not succeed now i can only access download mode.

View 9 Replies View Related

General :: Unbrick Via ADB - Recovery Fails

Jan 8, 2013

I believe I have bricked an Alcatel 990 after flashing "cm-7-20121221-UNOFFICIAL-brandy.zip" via CWM.

Here are reasons why I believe it's bricked good and proper ;-P

1/ device boot loops when charging only via usb connection to PC
- 1.1 - device shows android logo - then "Alcatel One Touch Cyanogenmod 7" text/logo
- 1.2 - this loops continuous and never fully boots - output of adb logcat below

2/ when power-up off charge, only "menu", "search" and "back" soft keys illuminate - the screen+backlight stay completely off
- 2.1 - this remains constant until battery pull
- 2.2 - recovery mode via key combos do not work. Period. (no user error - assured!)

3/ when connected via usb during point 2 - there is not feedback from adb logcat - dead as a doorknob
- 3.1 - when boot looping (1.1 above) I get ~2seconds of adb connectivity then device reboots.
- 3.2 - fastboot <options> <commands> does nothing - device stays as "waiting forr device" this is contstant
- 3.3 - adb has better luck - I can invoke adb logcat and this captures log info as below
- 3.4 - adb recovery options fail and device reboots and hangs as on point 2 above
- 3.5 - adb shell shows rooted prompt for 2 seconds when <up/previous command+enter> very quickly repeated keyboard bashing style
- 3.6 - I have invoked "adb shell rm -r /cache/*" and "adb shell recovery --wipe_data - all to no avail in context of unbricking device

Code:
david@1000H:~/Downloads/src/adt-bundle-linux-x86/sdk/platform-tools$ adb logcat
- waiting for device -
--------- beginning of /dev/log/main
I/cm ( 105): Welcome to Android 2.3.7 / CyanogenMod-7-20121221-UNOFFICIAL-brandy
I/cm ( 106): _

[Code] .....

This is replicated on command and is constant. Replicated under slackware/linux and under win7-32bit-ultimate.

Recovery fails to boot so I need some sort of usb 'bridge' to interrupt the boot loop and invoke recovery - or flashall back onto device - but fastboot fails to identify the device/connectivity.

View 4 Replies View Related

General :: Unable To Unbrick Nextway E9x?

Apr 13, 2014

I've hard bricked my e9x tablet, no power black screen nothing, and I'm trying to unbrick. I've reset the NAND but that didn't work either.

View 1 Replies View Related

General :: How To Unbrick Samsung GT-i5500

Apr 7, 2012

I have recently bricked my samsung i5500 by flashing it with wrong software(that's what I think anyway). Phone is not responding at all. The screen is black at all times. I've tried volume down + ok + call end with no effect also UnBrickableMod didn't work. Is there any way to get it to work again?

View 5 Replies View Related

General :: How To Unbrick Asus Memopad HD7

Aug 25, 2013

how to Unbrick the Asus Memopad HD7 ? Or custom recovery or where i can download the Stock Rom ?

View 9 Replies View Related

General :: How To Unbrick Samsung Galaxy S2 HD LTE

May 15, 2012

I update ICS to my samsung Galaxy S2 HD LTE failed maybe cause I'm using an i9100 ICS rom.

when i restart the phone, it goes into an phone icon connected to a PC icon with an exclamation mark icon inbetween.

or I can't turn it into recovery mode by pressing Volume Down + Home + Power (or any other key combos) .

I can't find the device by adb via pc, and kies connect the phone also failed.

I think the phone is bricked when I can't get into download mode.

even if i use a usb plugin, it goes to "Factory mode" with "phone ! PC" icon,but not down load mode.

how can I recove my phone?

View 4 Replies View Related

General :: How To Unbrick Galaxy S Duos

Apr 20, 2014

how to unbrick galaxy s duos ?how to unbrick

View 3 Replies View Related

General :: How To Unbrick HTC Sensation XL With Ubuntu

Aug 30, 2013

Since yesterday I have a big problem. Yesterday I think I deleted my Sensation XL, because now it's dead. The bootloader and the Charge-LED dont work anymore. No sign of life... Now I saw the tutorial how to unbrick a HTC. I downloaded Ubuntu, but if I use the brickdetect of the Sensation it just says: "Device can't be detected". Now my questions: Where can I get the Unbrick-package for the Sensation XL? Can I unbrick my Sensation XL with Ubuntu?

View 4 Replies View Related

General :: How To Unbrick Prestigio PMP7100D3G Tablet

Apr 7, 2013

All information I found (perhaps I lookup with wrong keywords) is about unbricking the phone or other manufacturers tablets but once someone rooted the device and installed a modified rom but then playing with fastboot or some download managers, etc.

1. I wanted to revert back to 4.1 JB soft for my tablet as I found the most recent update messing up with 3G connectivity despite the fact the manufacturer prepared the update to improve 3G... anyway

2. I run the RKBatchTool 1.5 the device was connected properly as I did before when upgrading from ICS to 4.1 JB.

3. Unfortunately, just before the end of downgrading something went wrong (please see the below log) and now booting up the device fails. At first it displayed some linux script about trying to recover, then prestigio screen appeared just to show in a second a dead android robot with an exclamation mark.

14:57:28 504Rockchip Batch Tool v1.5.3.0 start run
15:02:16 091Rockchip Batch Tool v1.5.3.0 start run
15:05:33 769Rockchip Batch Tool v1.5.3.0 start run
15:58:23 292**********Upgrade Start Total<1>**********
15:58:23 307<Layer 5-3> Test Device Start
[code]....

4. I tried a combination of volume up and power button but still no luck.

How can I bring the live back to the device that was not rooted. I have an external SD card. I loaded an original image from prestigio but I guess I need something else done so it actually boots from the SD and recovers the ROM to the internal memory.

View 3 Replies View Related

General :: How To Repair / Unbrick Android Tablet

May 19, 2014

I experimented a bit with the settings and I adapted the tablet one file in ROM (Data / system / etc) vold.fstab.

Unfortunately tablet not working, only show android logo and then nothing. In recovery I got it, wipe data / factory reset and wipe cache partition but without result, that result is the same.

Is there any way to copy original file or modify the edited file in ROM?

I suppose some way by cable and ADB.

Firmware unfortunately I do not and I did not find him anywhere.

It is a tablet with Rockchip RK3188 -> 3Q RC1025F

View 3 Replies View Related

General :: Unbrick Hard Bricked Device

Mar 8, 2014

I hard bricked my GT-S7562 s duos and need a way to unbrick it.I was trying to port CM11 on my device while it happened.No problem if the way you know works for my device or not. I will try anything .

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved