I have problem for flash recovery on my phone, he's unlocked, i make erase recovery but at the time I fastboot flash recovery cwmr_touch.img answer are always not a img or a folder!?I am working on a Mac.
My phone are huawei ascend g 600 huawei u8950dv100r001c17b952 and i wanted to install U8950D_FloMass-ter_1.7.0
i have a serious problem with my huawei u8950-1 g600.i tried several way to unlock bootloader and finally i find a file and transfer it to my sd and update my devise by hold volume up/down and power.after this i have my phone rooted and recovery installed but the major problem, Bluetooth is not working anymore and in about phone section in status Bluetooth address is unavailable.
Having obtained the bootloader unlock key from Huawei, how does one unlock and root the phone? Will one be able to backup the original firmware that comes bundled with the phone and restore it on a whim, if required? Are there any custom ROMs for this particular model?
Are there other ways to flash a recovery with a locked bootloader?
I can't flash my stock recovery through fastboot with a locked bootloader. I can't boot into my recovery because my current recovery is TWRP 220.127.116.11 and I have a locked bootloader. I can't unlock my bootloader because I have used an IMEI Hack Tool and set my IMEI to 0 (I guess). I can't boot into my ROM because I used an IMEI Hack Tool. I can't Force Upgrade too (Vol Up + Down + Power). It only shows a pink/purple screen.
I can only flash a recovery with an unlocked bootloader. I can only boot into a recovery with an unlocked bootloader (except for stock). I can only unlock bootloader if my IMEI has restored. I can only restore my IMEI if I can boot into my ROM. I can only boot into my ROM if I have a stock recovery. I can only Force Upgrade if I have restored my IMEI.
I tried to flash a custom rom on my huawei honor .. and after I loaded the bootloader.bin by terminal emulator.I restarted my phone and it is stuck on load screen and turn off after seconds. I can't go to recovery mod or anything .. all is what I can do is to go on the pink screen when I press volume up+volume down+ power button
I tried updating my U9200 from firmware B105 - B315 but it did not allow me to do so.I then followed olav's guide and flashed MIUI onto my device but i have no service now.Also, i cant get the device into recovery using the Volume UP & Volume Down and power button so try and install the huawei stock firmware again.
When I was trying to get Clockwork Mod sorted for my Huawei u8160 phone I accidentally chose to flash it with the official Clockwork mod for the Huawei u8150 stupidly misreading it as my own phone and now it has left me with an unusable recovery so I can't install any new recovery or ROM's or anything, I am getting almost constant errors whenever I try to run my phone saying whatever process has stopped working and that I need to force quit it. I have tried to start it in fastboot or whatever it is called but all I am getting is a screen that says "firmware update step 1/2 unpacking update failed", I have tried to start with many different key combinations but nothing is working.
how to flash ROM on Huawei Ascend G525? I had just done rooting this phone. Also, I don't know how to navigate to the recovery of this phone, I did try to press the power on button with the up and down volume keys but it did not go to the recovery.
i have successfully rooted my phone and I am Trying to Flash MY phone's Rom (huawei G510-0200), but when i install it's giving error on executing binary in zip. i have tried many times but still i didn't get any result.
I have serious problem with this android mobile phone. it is pretty good phone very useful with dual sim function one of them is 3G with WiFi Hotspot but the problem that I have rooted the phone with superoneclick and I have installed a lot of apps in it modifying some language files then when I restart the phone to let the changes take effect then the mobile keep restarting for infinite. Tried to get in to the recovery mode by using Call Button+Volume up+Power but the screen became blank. I spent the whole day searching the the internet to find the solution but with no clue. the problem the device is new and not supported that much in the public forums. could not find Stock Rom. Huawei website and bulletin was not useful.
Is there any way to do it through USB or sdcard and How?
[Guide] How to install ClockworkMod Touch Recovery On Huawei Honor 3 HN3-U01
Before You Begin ◘ Root your Huawei Honor 3
Required Files ◘ TouchRecoveryInstaller-v1_01.apk
Installation ◘ Install TouchRecoveryInstaller-v1_01.apk on your device. ◘ Open the Application and tap "Install Recovery". (grant SuperUser access) ◘ After Installation tap "Reboot into Recovery" to boot into recovery mode.
I recently Rooted my droid 1, and it went well, nothing wrong with it. I was wanting a new ROM, so i used RSD Lite to flash SP recovery to my phone. I flashed it and the screen say SPR has been installed. So on my CP on RSD Lite it said Rebooting your phone. It never rebooted it and after a while RSD said Please manually reboot your phone. So i did and when it rebooted it had the battery icon displaying o battery charge, even though i knew my phone wasn't dead, because i had it plugged in with maybe 40% remaining or so. So after unlocking my phone it displayed the Android Shutting Down Screen, but it didnt shut down, it halfway rebooted back to the "Red Eye" on start up, and it repeated this cycle over and over. I pulled the battery. Right now somehow the phone managed to stay off after shutting down, and i have it plugged in to my computer, and the little white LED light next to the USB port is on. I havent restarted it but im seeing if it will charge.
I want flash the samsung original recovery.img which the recovery only consist the auto-restore of device because i updated the new android 1.5 rom (I7500ZHJK1) at samsung, i cant find odin original rom and i want keep the Warranty.
Friends of Jupiter Huawei g525-u00and have been asked Ram Kastvm able but Alanmshkl. Already green screen after power ... not that fast boot mode will not go into recovery mode and not the original ROM using loam bottom half Vbala White gets going
I have a Nabi 2 tablet that I've rooted, installed TWRP, and flash the gapps and a few other tweaks to. It's about to go in for an RMA since the USB and charging ports are both broken. The problem in the USB port is that one of the pins got bent - I don't know how, it looks like the conductor somehow got peeled back off of the plastic. The point is, I have no USB access to the device.
In order to pass the inspection for the RMA, I need to have it stock I can flash the stock ROM by putting it on the SDCard in my laptop then transferring that to the device and flashing it through TWRP. The question I have, though, is whether I can flash the stock recovery with ADB access to it. Every thread I've been able to uncover so far about flashing a recovery requires ADB access to issue the "adb fastboot flash" command. Is there another way to do this?
I tried to flash CWM Recovery but when the 'confirm your device' menu popped up, my phone wasn't there so i just selected the first one on the list. Now when i try to reboot into recovery, nothing happens. It just boots up normally. how to either flash stock recovery or a custom recovery that will work?
From this link====>[URL] ....., I think it can do that. But I'm not sure.
2. Can recovery flash recovery partition itself?
I think it can not do this. Not confirm that.
3. We know in update.zip, boot.img is corresponding boot partition, but why system is a folder, not system.img? There is a system partition also.
4. While OTA upgrade system, why the update package downloaded under /cache path? Can we change it to sdcard?
5. Most important, what exactly update-script do things under recovery mode? How the command executed?
BTW, there are other questions, but not related to Recovery Mode.
1. How can I see the flash partitions? I know to use the command cat /proc/mtd, but as Samsung, it use emmc flash, while I type that command, no results printed. How to see?
2. About userdata partition, we know that when first run android OS, system will copy files from /system to /data, but does it do it every time that we turn on the phone or just do it once after the first booting after we update our system?
I hit the top button. Flash Clockworkmod recovery or what ever it said. I then backed up my Current ROM. I then downloaded Cyanogen v6.0.0 cr2. It downloaded and rebooted my phone. But It went to a screen with a Triangle w/ exclamation and a phone under it. I then hit the up vol button and camera, and now I'm at the Android system recovery page and I don't know what to do next. These are my options reboot system now apply sdcard:update.zip wipe data/factory rest wipe cache partition wipe base band data. I did click to backup current ROM and wipe data and cache.