General :: How To Flash Samsung S DUOS 2 With Stock ROM On Odin V1.85
Jan 29, 2014
Today itself i downloaded and tried to flash my S DUOS 2 with stock ROM on Odin v1.85. Though it started and was in initial stage( Flashing boot file), i mistakenly DISCONNECTED the device. Now it's not turning ON !!!!
Device : Samsung Galaxy S Duos 2 S7582
Firmware : S7582XXUAMK3 ODDAMK1
Odin - v1.85
Mistake - Disconnected the device while it was downloading the firmware.
Device Status : Not Switching ON ! , Nothing happens when power key/+ any key is pressed
I've read a lot of topics in online and also saw a lot of video tutorial to Flash my Galaxy Y's stock ROM with odin.In Odin,I've selected every file but whenever I click 'Start' button,it shows me this message in message box.
i had custom PMP light rom installed on my device. i then wanted to install SilverNexus kernel given here:URL.... so downloaded it & flashed it via CWM recovery
after that it keeps boot looping, also cant enter into CWM recovery. can't even install old kernel via Odin. odin is not detecting it anymore.somehow if i can replace my old kernel files read many threads. seems like Heimdall....but i m getting "ERROR: Failed to initialise protocol!" wen trying to generate pit file
I have a question about the files being used to flash my Samsung Galaxy S2 via Odin.
I have already seen this link [URL]...
I am trying to flash the PDA, Phone and CSC back all to normal stock. I have downloaded a firmware and I only have one file with a .dll file. The one file I have is named "I9100BOKK1_I9100TMUKK1_I9100BOKJ1_HOME.tar.md 5" I have extracted the files from here also and it contains boot.bin, cache.img, factoryfs.img, hidden.img, modem.bin, param.lfs, Sbl.bin and zImage.
How with these files and Odin do I flash all three parts. I can't see how to use these files on the above link with instructions for flashing and rooting.
I have a Samsung SGH-I897. I was trying to flash from Froyo to GB using odin. I did not root it (I guess I was thinking I didn't need to from stock to another stock fw). It's bricked. I bought a JIG, but nothing happens, just black screen.
I bought my Galaxy Ace S5830i last month. I hadn't installed Samsung Kies until yesterday, when I launched it it prompted a firmware upgrade. First I tried to use kies to upgrade but whenever the upgrade process started (Kies started downloading the firmware files) my device automatically got disconnected..I tried reinstalling kies, restarting my phone but nothing worked.
I then decided to use odin(v1.87) to flash the firmware on my device but it kept failing at first step itself. Here's what it said :-
<ID:0/010> Added!! <OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> S5830iXXLF3_S5830iODDLF1_RST_S5830iDDLF1_HOME.tar. md5 is valid. <OSM> Checking MD5 finished Sucessfully..
The phone has been working as fine as ever. Kies never got to the step of INSTALLING the new firmware as whenever it started downloading the firmware files my phone got disconnected so no damage there.
With ODIN I entered download mode but here too it fails at the beginning, so I just switch off my phone and restart it and it works as if nothing ever happened (I've made several attempts)
I just brick it while rooting thru odin. while in process of rooting and give me a result of FAIL. i accidentally click the start without resetting my phone. and now, when im going to open my phone i got this error
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Any link where i can download a stock rom of my phone.
I have recently upgraded and rooted my Grand Duos i9082 (currently on Stock v4.1.2 AMB3), and was browsing through the "Root Explorer" app, when I noticed some folders under /mnt/ and /storage/ listed as UsbDriveA, UsbDriveB, UsbDriveC. I can connect a USB Flash drive to my phone, and use it as an external storage media? I believe this function is available on Samsung Note & S3 as an inbuilt function (i.e. without having to install any external application). I would like to know if the same function is available on my Grand Duos.
I'm following step by step process to root my gt-s5310 using ODIN 3.07. Started from download mode and connect to the PC is no problem at all. ODIN finished with the GREEN PASS. When I tried to open recovery mode, only android recovery mode is open(but malfunctioning, going no where when I press the home button) that recovery mode also don't has "install zip from sd card" option.
My android version is 4.1.2 . Baseband version S5310DXAME2. Kernel version 3.0.15-1521875 se.infra@SWDA2309#1
I am currently trying to repair a soft bricked(stuck in boot loop) Samsung Galaxy S2 (T-Mobile) . I am trying to save the info (contacts,sms,pictures..etc). Would using Odin to flash CWM Recovery and doing a nandroid backup and then restoring the phone to factory settings. Would it somehow save everything in the internal memory and fix the phone?
1. Open up Odin Multi Download 2. Under Select OPS, choose Behold2_partition.ops 3. Click PDA, choose the PDA File you are Trying to Flash Rather it Be BH_MAN Rom / or Stock 4. Power Off Phone 5. Make sure you have it connected via USB 6. Hold and Press Volume Down, OK, Power (the red end button) 7. Phone will say Download Mode 8. Click Start on Odin Multi Downloader. 9. Wait a couple of minutes 10. Stock Touchwiz phone working again!
I'm having a problem with my phone, I've had 2 lines show up at the top of my screen in the past couple of days. They're both multi-coloured and definitely look glitchy. They show up even in boot screens, fastboot, recovery, etc. I thought it might have been a problem with Galax0 that I was running, so I tried to re-flash it with Odin, and Odin seems to finish, but the phone does not actually get flashed. It stays at my previous firmware, with all apps installed, but when it reboots with Odin, the screen doesn't work (except in between the two lines at the top, so I can just see the bar at the top). I pull the battery and reboot, and it works, but is very glitchy.
I don't understand what is root the phone , flash the phone using ODIN to save battery .
Also my phone rightnow when I check the battery information , it said " Android system 88% of battery" " Phone Standon 6% " , Is this because the new Android 1.6 making my battery drainning so fast because rightnow I am using with a little of playing around , WIFI , and then I turn off the WIFI again , the battery still didn't last for at least 24 hours . I didn't making too much calling also .
I removed the OS from my N7100 after I messed up with a kernel. Now im trying to reinstall the cyanogen mod but my computer doesnt recognize the phone, and so my only way of flashing anything to the phone is by using Odin, which only accepts .md5 files. I also have Clockworks Mod Recovery but like I said, my computer doesnt recognize my phone as a device
How can I flash cyanogen mod via Odin? When I download it from the official website its not in .md5 format, it's a .zip.
I've updated my Galaxy S II to ICS via Odin but wanted to erase my flash history so flashed an old bootloader .tar file, erased the flash history but now want to flash the ICS bootloader back.I've extracted the sbl.bin file but cannot create a tar file that Odin recognises. Have tried using 7zip but Odin locks up when I try and flash it.
OEM 1.6 Packages are uploaded now.Odin files for the 1.6 OEM update are now available! All necessary files and instructions are included in the download.To use the update you will need a Windows PC, USB cable, your Behold II, and about 5 minutes.Some users are reporting that after the update the phone will temporarily be stuck in a boot loop. This seems to happen when the user has previously installed certain custom ROMs such as Take5 and Galaxy R12.The work-around requires a complete factory wipe of the phone, meaning you will lose all of your data and apps not on the SD card.
my galaxy grand was rooted and had the Resurrection Remix custom ROM, but now I want to reset my binary counter, unroot and flash the stock ROM. I started by downloading the .tar.md5 file (stock ROM), then I loaded it in Odin v3.09 as the AP (which is the PDA option but changed its name I think) and flashed, but it says fail at the beginning and now I only see "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again". I already installed Kies and tried this, but after a really long time when the progress bar reached 70%, it said Dll load fail and this was the second time I do it through Kies, but no avail and yes, I'm pretty sure that I have the ADB drivers installed. I flashed CWM touch recovery and it works good, so now I can enter Download mode and CWM mode (or whatever it's called) only. I want to flash back to the Stock ROM which I already have.
Alright this may have been asked a few times, or maybe it could not of been asked. I just can't find the thread related to answering this question. Okay so my question is, can I flash Galaxo 1.6.2 or GAOSP "without" ODIN flashing or updating my firmware to 1.6? and not then what consequences would occur if I don't flash firmware update before GALAXO 1.6.2 flash. My phone firmware version is I7500ZHJA1 and I believe that is the latest firmware for my region which is still Android 1.5.