General :: Download New ROM When Phone Stuck At Boot Logo
Nov 17, 2013
yesterday, I flashed Modaco Switch for HTC One when my battery is low (20%). Now it wont let me pass the "HTC quietly brilliant" screen. I've searched the solution for hours and still, no luck on finding it out. But I see some thread that suggest me to download a new rom and put it in my SD Card, but I cant even pass the HTC boot up screen. Btw, I've relocked and unrooted my device.
My Sharp FX (ADS1) is stuck at the "Sharp" logo when I try turning it on, now I know that are several of these post on this forum, but I still can't find any that offers a solution for me. The phone is rooted and that's it, I haven't had time to put a new ROM or anything yet (although I would love to) and I can't seem to get into any type of recovery mode, and I think I have tried all of the button combinations, the only time that I can get it to show something other than "sharp" is when I plug it in, it shows a charging battery.
I Have Xolo A500s android 4.2, Ram 512mb, GPU Mali400mp, 4Inch. i m gaming boy so for playing 3d n hd games in this phone i root it after root i install chainfire 3d pro n open click install tap and phone going restart phone ok after that Phone Is stuck Xolo Logo. And nothing happen In restor/format set boot setting.
I have samsung galaxy nexus and today i tried to flash a rom and the device stuck to the boot logo. The volume rocker doesn't work to go to fastboot mode or recovery mode and the adb device is anauthorized.
I bought a Galaxy s Duos S7562 and i installed rom cosmic V1.It was working .But after that, i find out about pmp ultra light rom.I tried to install it but it remains stuck at boot logo, I mean it is restarting at infinite.I tried a lot of basebands, kernels but the same thing happened.Now i tried to install Cosmic rom V2 and before that, I installed Fat.bin with ODin 3.04 but the problem persists.I used the baseband :Bmj1 ; Amd; Bmd but with no ressult
I should have just left it as it was out of the box..So after attempting to install a custom rom (4.4.2 Play edition)my s4 is stuck at the Samsung I9505 boot screen. I wiped the 'Dalvik cache' 'System' and 'cache' partitions in TWRP as I was following along with a Youtube video (that didn't work). When I tried to flash the custom ROM it automatically said failed. After giving up and turning on the phone I found that I'm stuck at this screen.
Have I bricked the phone? $550 could have gone down the drain just like that. I don't want to touch it without any advice and make everything worse. My only hope now is that I've managed to wipe the original software and it has nothing to boot from.
Why did the ROM install fail in the first place? I had it copied on the SD card. It was zip file.I can still access TWRP just fine and my SD shows up with the custom ROM still there, it's just whenever I hit install it fails in under a second.
recently bought xolo a800 phone ... was experimenting with it and bricked it the next day.....the phone is stuck on the xolo logo at start and its not booting into os.. the phone is soft bricked according to me
I have a Garmin-Asus A10 that i wanted to change its font using Type Fresh app. When the font changed the app required a reboot,, but when the phone rebooted it became unable to boot after the garmin-asus logo anymore !!
I tried a hard reset using the volume keys pressed with the power button but it displays "**WIPE USERDATA**" on the top left corner and nothing happened.There is an option to hold the volume up key with the power button that displays " USB POLLING MODE " in a blue screen.
My phone now is not able to boot properly and freezes on the startup logo.
Instead of seeing the boring old Android logo or my service provider's logo, I'd love to see the standard text-based Linux boot screen that shows the status of all the hardware and configuration info as my phone boots. My current phone is an HTC EVO 3D running Cool ICS with Sense 3.6 and Revolutionary CWM.
I was rebooting my phone today and it every time I try it gets stuck on The Galaxy S logo with the big flashing "S" on the screen. It acts like it is going to boot up but just after the ATT screen and the boot sound it gets stuck. I did the one-click-lag-fix about 2 weeks ago and the phone has been running smooth ever since. My wife and daughter are on the road so not having a phone really stinks right now.
I was listening to music as I always do. I didn't realize it but the phone (Rezound) drained a bit faster than expected and died completely. So I went to to charge it, and left it overnight, off naturally, now when I power it on, its stuck on a boot loop.
It goes throught the startup animation, and once it gets to Sense, in the few seconds before the radios kick in and it finds the cell service, it reboots and starts all over again. Only way to get it to stop is pulling the battery out.
I started to do the hard reset, but when I got to the window for it, all I saw was Factory Reset (I guess they are the same) so I selected the option for reboot.
The light to charge does show its charging, and at one point, when I had it plugged in this morning, and managed to swipe the ring to get to my swipe lock screen, it was saying I was at 99%. then it goes all slow and then rebooted.
I used the factory wall charger, and its drained I think once or twice before, and I have done the FoxKat method of calibrating before this. Not sure if its a battery thing, since it will power up, or not.
I'm stock, non rooted, on GB.
I don't really want to do a factory reset as I'd like to have my messages saved. I did save them last week when I saw ICS was available, but i have some new since. I'm pretty sure my pictures and videos will be saved during the reset. I don't think that folder gets wiped. However I was going to try going to a VZW store to see about a new battery. The phone is new since June.
I was trying to the galaxy app on my behold 2. Once I rebooted the phone it stays stuck on a "samsung" logo that glow, but nothing else. I tried removing the battery and restarting, but it still stays stuck on the SAMSUNG logo..
I flashed my phone to 2.0.1 b/c I thought I had to do that. Turns out I didn't, but there is outdated and updated information out there and I was misled. Anyway, 2.0.1 installed fine and it booted up, though my phone wasn't activated. Anyway, then I realized I needed SPRecovery, so I installed the sbf for that using RSD Lite. It installed successfully as far as i can tell? But it did a reboot, and now it's just stuck on the white-background Moto logo while plugged into my USB. RSD Lite says "Please manually power up this phone."
i was running the latest version of Slim Kat rom for my i9100 when it turned off and then was stuck on samsumg boot logo. When i try to access twrp it just says teamwin and wont go any further. It happened once before and so i just flashed a stock rom and then went back to rooting it. However, now when i try to flash any rom (stock/custom), or another recovery with odin it freezes at "nand write start". I have access to download mode which is really the only thing i have working atm
Ive read around and done everything (eg try other usb ports/cables/odin version) but no luck. Is there anything else i could do? I dont wanna do a pit flash cause im scared ill completely screw it up.
I try to backup my stock ROM using clockworkmod Recovery through my optimus hub. when reboot my phone entered into "fastboot mode started udc start() " . then I try to install cwm recovery partition using fastboot.exe. but now I got stuck at LG logo screen and nothing is working.
I can root a g1 with ease but I sort of got into trouble with the behold. This might sound stupid but do I need to root the phone before I install the port galaxy 1.6? I just did this.
1. download odin here Odin Multi Downloader v4.03.exe 2. download any Of BH_MAN ODIN Ready Rom's 3. download winrar ( google it) to extract the BH_MAN zip file. 4. follow these instruction
Quote: 1. Unzip the zip file. 2. Open Up ODIN Multi Downloader 3. Click the OPS button and choose Behold2_partition.ops 4. Click the PDA button and choose the md5 file, You will get error message" invalid image...," but ignore it. 5. Turn off Phone. 6. Plug phone into USB. 7. Put phone in download mode (Vol Down + OK + END Button) 8. Wait till detected and press START. 9. Enjoy the Port.
And my phone was stuck on the android logo. do I need to root first and where can I find this? Is this where I go. http://androidforums.com/all-things-root-behold-2/22470-persistant-root.html Can I do this method even though my phone is stuck on the android screen? How can I get back to default at least?
currently my Galaxy Tab P1000 is stuck at Galaxy Tab/Samsung logo.
Before this I'm on v2.3.3, rooted. Then I try to flash MIUI ROM where resulting my tab to stuck at boot screen. Try to restore nandroid backup, still stuck at samsung logo plus now cannot reboot into recovery. Download mode still can access.
My karbonn A1+ stucked on Logo screen.i tried to hard reset by pressing the volume down key and power button but nothing comes up then i put the set on charger the phone gets on but again stucked on logo screen..do i need to reflash but how do i ? the phone is not getting on recovery mode. isn't there a way to attach the mobile too pc and then reflash?