General :: Unbrick Mtk6589 Star X920?

Sep 22, 2013

I flashed a wrong ROM, because flash didn't work, I used a Star S5 one instead of a X920Butterfly one. So I tried this guide http:[url]..... but my PC do not recognises phone, I Have Upgraded Windows 7 to Windows 8 so I don't now how I can re-install drivers.

General :: Unbrick Mtk6589 Star x920?


ADVERTISEMENT

General :: Star X920 - ROM Without NVRAM

May 5, 2013

I had the good idea to format the whole flash memory of my phone (Star x920). Now, I can find a lot of rom's but without nvram. So, I didn't have anymore a proper calibration ini for the signal =>no 3G.

And if I flash my phone, I must all times re-enter the Imei's. Is the nvram the same for all mtk6589 phones? Where can I find a "full rom" included nvram?

Searching for the calibration ini for my Star X920?

View 1 Replies View Related

General :: How To Unbrick Haipai I9389 (MTK6589)

Sep 1, 2013

I have bricked my phone, and it now can't turn on..

I have a backup of the software(My friend gived me it), but when i put it in SP Flash Tool, i see only the red bar, then the program don't flash anything..

My computer see the phone as "MTK USB Port (COM6)".. Is this the problem maybe?

View 7 Replies View Related

General :: Rooting MTK6589 KVD Apollo One?

Apr 28, 2013

I recently purchased "KVD APOLLO ONE K6589 Quad-Core Android 4.2.1 WCDMA Smartphone w/ 5.5"

The phone itself was next to nothing ($180) so even if its Unrootable.

I would however prefer it rooted, I have read that you can basically use the MTK6577 rooting tool on the device?Would this risk bricking the device.

I'v attempted to contact the manufacturer however to no avail.

View 5 Replies View Related

General :: T94 MTK6589 Bootlooping Due To DPI Change?

Aug 10, 2013

I bought recently a Tengda T94 (also being referred to as Dapeng T94).It has MTK6589 chip.

Me,the smartass,wanted to change the DPI setting of the smartphone,because Real Racing 3 lagged a little bit and thought changing it might fix the framerate.I changed it from 320 dpi to 221 with LCD modder and reboot.Then the surprise struck me,when it didnt start,it just stood on the logo and kept replaying it.I have tried with ADB commands - some works,some not.

I am with stock recovery 3e.

Has only few commands like reboot now,install update from adb,cache,sd card and wiping cache and another option for wiping data to factory settings (and two irrelevant options of restoring/backing up user data).

I tried wiping all data and cache,still bootlooping.

Tried with mediatek firmware adapter tool,but i think it cannot change the build.prop file while bootlooping (it cannot find my device when in recovery mode),because it is either in use,or in read-only mode.

Tried with android commander,but didnt know what to do there.

I downloaded rather late a CWM recovery for my phone,and also if I am not mistaken two roms - one of them is exactly like mine.

But when tried to install thru recovery adb sideload it starts and then says : restating ADBD ....... installation aborted and returns me to main recovery menu. Tried with my backed up build.prop which i have put in flashable zip file.

However,the two roms i have downloaded arent working properly.They are zip,but still adb sideload cannot read them.

And another (i dont know if it is relevant) my external sd card 16 gb default,when i put it in my old gsm to put the two roms and cwm recovery files,first windows wanted to format it and the only option was FAT 32,total of 2.87GB.What has happened to my sd card ?

Still I couldnt install from the external sd card the roms,only zip with build.prop file was listed and gave the same mistake as said above : restating ADBD ....... installation aborted.

PP: I have arrived at the conclusion that the problem is this line ro.sf.lcd_density=221,which is in build.prop file (I might be wrong).So the question is can i somehow modify the prop file or what should i do ? And why has my sd card shortened from 14,6gb to 2.87 ?

View 4 Replies View Related

General :: Porting MTK6589T Rom To MTK6589?

May 6, 2014

After knowing that the mtk6589t rom can be ported to mtk6589..... i have started porting one..!!! But after porting it as i regular do... it gets stucked on boot logo..!! it dsnt go in boot loop but gets stucked on boot...!! what shld be done?

View 4 Replies View Related

General :: MTK6589 - Stuck On Android Logo?

Sep 14, 2013

I bought a chinese MTK6589 phone called the Tronsmart TS7 Glacier. I tried to flash CWM recovery with an app called Flashify. I was using the right CWM recovery for my phone, but when it rebooted it opened the normal recovery mode, and then when I tried to reboot, it didn't get past the first logo that comes up... Normally it shows an android logo, then it goes to a little animation with the tronsmart logo, then it's started up. Now it's stuck on the android logo... I've tried reflashing the stock rom from my SD card but I can't do it because it only works in CWM, the installation aborts normally. I've done it before but I got into CWM through a different app called mobileuncle or something. So yeah what I think I need to do is reflash the stock rom, but I can't do it without CWM, and I can't get CWM...

View 6 Replies View Related

General :: How To Root And Install CWM On MTK6589 Android Phone

May 30, 2013

I have been Using Sony Xperia Phones and rooting & installing CWM on those phones is fairly very easy (unlocking bootloader and just installing a Kernel Using Flashtool which comes with CWM and root) ...... However, i recently bought this phone:

[URL]

Its running on Jelly Bean 4.2.1 and has Quad Core MTK 6589 chipset ...

View 1 Replies View Related

General :: Camera Flip On Z26 (MTK6589) After Flash Stock Rom

May 24, 2014

I've bought a Alps Ipegtop Z26 a few days ago, and after a mistake, i need to reflash a rom stock But, i saw that my version was V06, and i can't find it...So, i reflash with the V05 version...

After few problems (bootloop...) ALL works except CAMERA

She's REVERSED !!!

I have test to exchange some lib fils from my first backup (V06) to my actual rom, but it didn't woks...

View 3 Replies View Related

General :: S4 MTK6589 Clone - Boot Animation Logo

Oct 20, 2013

I was trying to update my s4 clone, but missed click using something called mcm or something and it restore my cellphone to factory data, and know i dont have boot animation logo, i tried to use many programs like boot animation logo changer, rom toolbox but nothing works.

View 1 Replies View Related

General :: Changing FS Type For Internal And External SD On MTK6589

Jan 13, 2014

Trying to customize my new device (Runbo X6: MTK6589T, 2GB RAM, 32GB ROM, Android 4.2.1) .

1) Repartitioning

Actually, I successfully edited the partition table in EBR1 and EBR2 and the start addresses in the Scatter file and proofed it multipple times by recalculating, but after flashing, although I get a correct output in system settings and by dumping /proc/emmc, /proc/partitions and /proc/dumchar_info, when I try to push some apps, for ex., above the initial 680MB to /system/app or something similar I get a "disk is full" message. As I was able to find out only the /data and /fat partitions get physically updated by the new sizes, meanwhile the /system and /cache partitions remain physically on the initial state and get updated by the new sizes logical only. Although if after flashing I dump the system image by "cat /dev/block/mmcblk0p5 > /sdcard/system.img" I get an image with a size corresponding to the updated size of the partition.

Initial values:
EBR1
begin /system = 00 18 02 00 (real 00 02 18 00)= 137216 blocks (* 512 bytes + 1024 blocks of 512 bytes) = 70778880 bytes
size /system = 00 50 14 00 (real 00 14 50 00) = 1331200 blocks (* 512 bytes) = 681574400 bytes
begin /cache = 00 68 16 00 = 1468416 blocks = 752353280 bytes
size /cache = 00 F0 03 00 = 258048 blocks = 132120576 bytes
begin /data = 00 58 1A 00 = 1726464 blocks = 884473856 bytes
size /data = 00 00 40 00 = 4194304 blocks = 2147483648 bytes

[Code] ......

I also read somewhere that it is also necessary to edit PMT: in that case I tried to flash with original PMT, edited PMT and without PMT, but cuoldn't notice any difference.

2) Mounting the internal memory and external SDcard on system start natively as EXT4 instead of FAT32

Using my old device (Runbo X5: MTK6577) I had success on mounting the internal storage as EXT4 by disassembling recovery.img and editing /etc/recovery.fstab to change the "vfat" value to "ext4" and reformatting the storage after a successful boot with ne recovery, but on Runbo X6 I get no change to the filesystem after reformatting. By the external SDcard I never had success.

View 3 Replies View Related

General :: Samsung Galaxy S4 MTK6589 - Stuck In Boot Animation?

Jul 21, 2013

I bought this phone whilst on a business trip In Shenzhen china.

It's was running 4.2.9 jb. 2gb ram 16gb rom 5" screen 1080p

I put 3d chain fire on it and now it's stuck in the boot animation.

I borrowed my friend phone, same as mine and loaded up mtk droid and it generated a backup of his phone with loads of files system folder, boot.img etc

It then packed it up into a zip file. From there I thought I could put the zip file on an sd card and boot into recovery and delete the data / cache and them select install from sd card.But the installation failed

View 2 Replies View Related

General :: Port Pure Google System Apps From Other Device To MTK6589 Phone

Sep 9, 2013

I have a Chinese clone of Galaxy S4 called No.1 S6 with MTK6589 Cpu and Android 4.2.1 (Odexed Rom), well, I tried to replace some system app like contacts, phone and mms with the same apps taken from the Slim bean 4.2.2 Rom for the Google Nexus 4 that has the same screen resolution.

I odexed the slim bean apks with dexopt-wrapper as explained here [URL] ...., I signed them with auto-sign software, so I put them into system/app folder with right permissions, deleting old apks first, rebooted the phone, wiped cache in recovery and when the phone booted the apk I replaced was gone, so I think there's a compatibility problem between my system apps and nexus 4 ported apps, maybe I have to take the slim bean (or other ROMS, whatever) sources and edit the apks and make them compatible with my phone...

How to port system apps from other devices with different software?

View 1 Replies View Related

General :: MTK6589 GT-I9500 Touch Screen Works Up Whenever Lower Part Is Touched

Apr 4, 2014

I was able to flash ROM from : LNK1 but I have a problem with touchscreen which works upside down. When I press screen on top it actually shows that I pressed at bottom of screen. I was looking for solution many days and have learned a lot from many sites and different forum threads, but surprisingly non of the solution works for me. I am not able to reach proper file to change proper property to change this behavior. Most probably i need to set somewhere: ctp_revert_y_flag = 1 as described here: LNK2, but I am not able to find nor edit script.bin on my phone, here I found some info: LNK3 and also here is very interesting info about partitions: LNK4 but I can't find this script.bin on my phone.

My phone is china phone 1:1 Real MTL 6589 GT-I9500, I was able to flash several ROM's using SP Flash tool from LNK5, I know how to do this, but no matter which ROM I flash no matter which recovery image I flash this touch screen behavior is still upside down as described.

1. set ctp_revert_y_flag = 1 in script.bin on my phone - I can't mount proper partition, don't know which partition should I mount, can't find this file

2. set ctp_revert_y_flag = 1 in script.bin on ROM file before flashing - don't know where to look for this file and don't know how to edit ROM before flashing.

What I know: how to root my phone, how to get to it using adb, how to use android-sdk, how to flash using SP flash tools, how to use recovery mode, clean user data, how to use SP Flash tool, how to switch on developer mode, switch on USB debugging, switch on "show touches".

View 3 Replies View Related

General :: How To Unbrick MT6577

Apr 11, 2013

how do I unbrick my MK6577 (Noir A-8) I tried to use SPTool to install CWM but now luck need ROM files to flash it through SPTools.

View 2 Replies View Related

General :: How To Unbrick WM8850

Sep 27, 2012

i'm trying to root my (chinese) tablet (like title). i've used nanospic.ro page_id=12[/url] WM8850 RootBurner v1.1.0.

So i put files into sd and reboot tablet. After the text "root complete" i removed sdcard and my tablet opened. I knew immediately that I could not access the to settings cause the icon was passing and text becomed com.android.settings. when i try to open it, an error message. So i try another time to root device but it won't open itself.. i turn on it and remain on loading gif..

View 3 Replies View Related

General :: How To Unbrick Alcatel OT-906

May 24, 2012

I have an Alcatel OT-906 but I bricked it.

I need to rescue it but I don't find any ROM to this phone or some way to repair it.

Is totally bricked

View 2 Replies View Related

General :: How To Unbrick Padfone 2

Feb 19, 2013

The terminal was mistakenly brick while I introduced changes to the file build.prop. Now the only way to turn on, is flashing the firmware again (putting the original file from fastboot does't work). I wanted to know how to transfer the firmware zip file to internal memory because the device is not recognized as FTP.

View 1 Replies View Related

General :: How To Unbrick Prada 3

Mar 12, 2013

my prada 3 is brick

View 2 Replies View Related

General :: Unbrick Micromax A90s

Jan 23, 2013

Actually I am in a deep trouble, I bought Micromax a90s a month ago , It is really a very good phone. I rooted it and was very happy but 1 day ago I was trying to add new fonts to it & It got bricked I don't have any backup.I have no sources to send it to service centre. how can I repair it myself, Unbrick ?

View 1 Replies View Related

General :: How To Unbrick Galaxy Y S5360

Sep 20, 2012

i was using repencis rom and i tried to flash jelly blast but something went wrong and i bricked my phone i am not able to access my recovery and when i try to flash stock rom via odin it fails i used different firmware packages but i did not succeed now i can only access download mode.

View 9 Replies View Related

General :: Unbrick Via ADB - Recovery Fails

Jan 8, 2013

I believe I have bricked an Alcatel 990 after flashing "cm-7-20121221-UNOFFICIAL-brandy.zip" via CWM.

Here are reasons why I believe it's bricked good and proper ;-P

1/ device boot loops when charging only via usb connection to PC
- 1.1 - device shows android logo - then "Alcatel One Touch Cyanogenmod 7" text/logo
- 1.2 - this loops continuous and never fully boots - output of adb logcat below

2/ when power-up off charge, only "menu", "search" and "back" soft keys illuminate - the screen+backlight stay completely off
- 2.1 - this remains constant until battery pull
- 2.2 - recovery mode via key combos do not work. Period. (no user error - assured!)

3/ when connected via usb during point 2 - there is not feedback from adb logcat - dead as a doorknob
- 3.1 - when boot looping (1.1 above) I get ~2seconds of adb connectivity then device reboots.
- 3.2 - fastboot <options> <commands> does nothing - device stays as "waiting forr device" this is contstant
- 3.3 - adb has better luck - I can invoke adb logcat and this captures log info as below
- 3.4 - adb recovery options fail and device reboots and hangs as on point 2 above
- 3.5 - adb shell shows rooted prompt for 2 seconds when <up/previous command+enter> very quickly repeated keyboard bashing style
- 3.6 - I have invoked "adb shell rm -r /cache/*" and "adb shell recovery --wipe_data - all to no avail in context of unbricking device

Code:
david@1000H:~/Downloads/src/adt-bundle-linux-x86/sdk/platform-tools$ adb logcat
- waiting for device -
--------- beginning of /dev/log/main
I/cm ( 105): Welcome to Android 2.3.7 / CyanogenMod-7-20121221-UNOFFICIAL-brandy
I/cm ( 106): _

[Code] .....

This is replicated on command and is constant. Replicated under slackware/linux and under win7-32bit-ultimate.

Recovery fails to boot so I need some sort of usb 'bridge' to interrupt the boot loop and invoke recovery - or flashall back onto device - but fastboot fails to identify the device/connectivity.

View 4 Replies View Related

General :: Unable To Unbrick Nextway E9x?

Apr 13, 2014

I've hard bricked my e9x tablet, no power black screen nothing, and I'm trying to unbrick. I've reset the NAND but that didn't work either.

View 1 Replies View Related

General :: How To Unbrick Samsung GT-i5500

Apr 7, 2012

I have recently bricked my samsung i5500 by flashing it with wrong software(that's what I think anyway). Phone is not responding at all. The screen is black at all times. I've tried volume down + ok + call end with no effect also UnBrickableMod didn't work. Is there any way to get it to work again?

View 5 Replies View Related

General :: How To Unbrick Asus Memopad HD7

Aug 25, 2013

how to Unbrick the Asus Memopad HD7 ? Or custom recovery or where i can download the Stock Rom ?

View 9 Replies View Related

General :: How To Unbrick Samsung Galaxy S2 HD LTE

May 15, 2012

I update ICS to my samsung Galaxy S2 HD LTE failed maybe cause I'm using an i9100 ICS rom.

when i restart the phone, it goes into an phone icon connected to a PC icon with an exclamation mark icon inbetween.

or I can't turn it into recovery mode by pressing Volume Down + Home + Power (or any other key combos) .

I can't find the device by adb via pc, and kies connect the phone also failed.

I think the phone is bricked when I can't get into download mode.

even if i use a usb plugin, it goes to "Factory mode" with "phone ! PC" icon,but not down load mode.

how can I recove my phone?

View 4 Replies View Related

General :: How To Unbrick Galaxy S Duos

Apr 20, 2014

how to unbrick galaxy s duos ?how to unbrick

View 3 Replies View Related

General :: How To Unbrick HTC Sensation XL With Ubuntu

Aug 30, 2013

Since yesterday I have a big problem. Yesterday I think I deleted my Sensation XL, because now it's dead. The bootloader and the Charge-LED dont work anymore. No sign of life... Now I saw the tutorial how to unbrick a HTC. I downloaded Ubuntu, but if I use the brickdetect of the Sensation it just says: "Device can't be detected". Now my questions: Where can I get the Unbrick-package for the Sensation XL? Can I unbrick my Sensation XL with Ubuntu?

View 4 Replies View Related

General :: How To Unbrick Prestigio PMP7100D3G Tablet

Apr 7, 2013

All information I found (perhaps I lookup with wrong keywords) is about unbricking the phone or other manufacturers tablets but once someone rooted the device and installed a modified rom but then playing with fastboot or some download managers, etc.

1. I wanted to revert back to 4.1 JB soft for my tablet as I found the most recent update messing up with 3G connectivity despite the fact the manufacturer prepared the update to improve 3G... anyway

2. I run the RKBatchTool 1.5 the device was connected properly as I did before when upgrading from ICS to 4.1 JB.

3. Unfortunately, just before the end of downgrading something went wrong (please see the below log) and now booting up the device fails. At first it displayed some linux script about trying to recover, then prestigio screen appeared just to show in a second a dead android robot with an exclamation mark.

14:57:28 504Rockchip Batch Tool v1.5.3.0 start run
15:02:16 091Rockchip Batch Tool v1.5.3.0 start run
15:05:33 769Rockchip Batch Tool v1.5.3.0 start run
15:58:23 292**********Upgrade Start Total<1>**********
15:58:23 307<Layer 5-3> Test Device Start
[code]....

4. I tried a combination of volume up and power button but still no luck.

How can I bring the live back to the device that was not rooted. I have an external SD card. I loaded an original image from prestigio but I guess I need something else done so it actually boots from the SD and recovers the ROM to the internal memory.

View 3 Replies View Related

General :: How To Repair / Unbrick Android Tablet

May 19, 2014

I experimented a bit with the settings and I adapted the tablet one file in ROM (Data / system / etc) vold.fstab.

Unfortunately tablet not working, only show android logo and then nothing. In recovery I got it, wipe data / factory reset and wipe cache partition but without result, that result is the same.

Is there any way to copy original file or modify the edited file in ROM?

I suppose some way by cable and ADB.

Firmware unfortunately I do not and I did not find him anywhere.

It is a tablet with Rockchip RK3188 -> 3Q RC1025F

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved