General :: Tracing Partition Processes

Jul 9, 2013

how can i trace my recovery partitions all stuff, work ,process etc.? I want to know what is going on while i am entering to recovery. Because this partition is encrypted and i hope i can get some info from this trace stuff for reading the file system of the partition. My tablet running Android 4.0.3, Rooted.

General :: Tracing Partition Processes


General :: Tracing A Spoofed Number

Sep 21, 2013

Is there any apps for Android that can read sms metadata. Someone sent me a text that I'm sure is from a spoofed number. And i hope that i can trace the sms to the original sender like u can with an email. Or is there any way to trace a spoofed number.

View 1 Replies View Related

General :: Mount Arbitrary Phone Partition On PC / Change Partition Names?

Oct 8, 2013

I am running rooted stock Android 2.3 on LG E405 (no working 4.x ROMs exist for the device)

I have two questions:

1) What is the shell command to manually make android allow the PC to mount androids' (internal) partition as USB-drive? (I cannot think of right keywords to google this one up - )

2) How does android determine which partition is which (i.e. which one to remount for the PC when connecting in "USB storage" mode), beside vold.fstab and init.rc? On android 2.3 that info is not in "framework-res.apk", so where is it? In the partition table itself?

I had switched data partition with internal sdcard partition.

Here's how: Phone had a very small "/data" partition on /dev/block/mmcblk0p21 and large internal "/sdcard" partition on mmcblk0p20

So I reformatted mmcblk0p20 (ex-sdcard partition) into EXT4 and mmcblk0p21 (ex-data partition) into FAT32

Then I changed init.rc to mount mmcblk0p20 as /data type EXT4 and mmcblk0p21 as /sdcard type VFAT (mounting /sdcard was commented out in stock init.rc for some reason). This required modifying my boot image.

I have also set correct partition number in vold.fstab:

[#]dev_mount sdcard /mnt/sdcard auto /devices/platform/msm_sdcc.3/mmc_host[/#]

So basicly I now have a large /data partition and small internal /sdcard. I'm able install up to a gigabyte of APKs and it works fine.

However, when I connect to my PC via USB into "USB Storage" mode, the phone seems to still try to unmount what was previously sdcard partition (/dev/block/mmcblk0p20), instead of what is NOW an sdcard partition (/dev/block/mmcblk0p21) I can still send files to the phone via wi-fi and ADB, but the ability to mount it directly would be nice.

If I accidentally select "erase internal sdcard" from storage menu, that will also most likely erase what is now my /data partition, softbricking the phone. The "factory reset" option will probably only corrupt the sdcard.

View 1 Replies View Related

General :: SD 2nd Partition Doesn't Work - MiniTool Partition Wizard?

Oct 19, 2012

I'm have been trying to create a second partition on my sd card using miniTool Partition Wizard.But in the end I never get a 2nd partition but just a smaller first one.My approach is as follows:

insert empty SD card (FAT32, 4GB)
open miniTool Partition Wizard
right click on SD card - "Move/Resize"
choose 1gb for unallocated space after - click ok
right click on 2nd partition and choose "create"
create 2nd partition with FAT32/Ext2/Ext3 (tried all options already) and "primary" and Cluster 4KB - click ok
Apply

Afterwards my SD card is still shown as one partition, but this has just 1gb less capacity then before.Neither the Wizard nor the phone detects the 2nd partition then.

View 1 Replies View Related

General :: Partition Layout - Exact Meaning Of Value In CWM - Partition SDCARD

Aug 26, 2012

I can't figure what is exactly meaning the Partition Sdcard values in CWM.

I have an i9000, with 8Gb of flash. Some are system reserved. Available is around 6Gb.

When i run CWM, i can partition my sdcard, but i don't see what means the possible values (for 256 to 4096).

This is obviously not ruling the space left on /sdcard mountpoint (i partition to 2048, i still have nearly 6Gb available)... So what exactly means partition sdcard from CWM ??

i can't find an answer, and i dislike, when flashing rom, following commands i don't really master (generally a partition SD 2048 / SWAP 256 or SWAP 0).

View 1 Replies View Related

General :: How To Delete Partition 4 And Extend Partition 3

Jan 14, 2013

I have bought a cheap chinese phone that had a 4g rom. 512mb is mapped to data as p3 and p4 is mapped to internal storage which is 2g.

I have managed to work out how to delete partition4 and extend partition3 as they follow on from each other.
However how do I remove all links to it in the system as it still tries to mount it on boot even though it isn't there.

I have removed the line from vold.fstab and that just crashed the external and internal sdcards and the storage section inside the system settings.

View 1 Replies View Related

Android :: How To Enable Tracing

Oct 14, 2010

I am curious - how to enable such kind of tracing in Android? It is very informative to know for debugging.

View 3 Replies View Related

Android :: Want To Do Method Tracing For Phone Applications?

May 6, 2010

I want to know how to do method tracing for Android applications. I mean, a sequence of calls on each object, not a stack trace.

It's very similar to this question (Call trace in java), but on different platforms (jvm-PC vs dvm-Android). I have no control over the start arguments of dalvik, thus I cannot specify a java agent (or am I wrong here?). Is there another way to do method tracing?

View 1 Replies View Related

Sony Ericsson Xperia X10 :: Tracing Stolen Phone

Jul 19, 2010

Today my Sony ericsson xperia has been stolen.Now my question is, can they trace my phone with a special chip or with the simcard?

View 4 Replies View Related

General :: How To Manage Processes Properly

Feb 13, 2013

I have a GS2 skyrocket running CM10.1 and i've read that task managers are rather obsolete now. However I have noticed that when I let my phone run standard app process limit the battery life is around 30% worse than when I set the app limit to 4 processes in the developer settings. Now that I have CM10.1 and it doesn't have developer options, i'm wondering what I can do to limit my processes down to conserve battery?

View 1 Replies View Related

General :: Set Maximum Background Processes Not Using Developer Options Possible?

Jun 24, 2013

I know the android memory management is quite good, but is there an option for how many tasks are kept in the background before killed even if there is enough RAM?Is this possible by not using the setting in the developer options but some init.rc tweak?

View 3 Replies View Related

General :: Unknown Processes And Services Running In Background

May 24, 2013

What is the usage each of this processes and services running in background as below? They use about 61 M of my RAM!

As you see there are 5 services for GO SMS Pro! Why this services begin running after reboot? For google services also a service named android core apps begin running.

View 3 Replies View Related

General :: Application Which Forces All Processes To 0% Cpu Usage When Idle

May 26, 2013

My idle cpu usage seems a little high and sporadic and I'd like to force them all to 0% when idle but still be able to receive background data like for instance my play store seems to use a continuous idle usage and a few others. I can freeze them with the System Tuner but I'd prefer to Globally force all apps to 0% usage so I'm getting say 1% usage at idle on occasion every hour or few hours? When I use System Monitor, I see my cpu usage kind of jumping from 0 to up to 35-40% while idling and I don't want these apps using any resources at idle. I'm trying to extend battery life a lot more.

My battery life is really good already since I have a 3600mah battery but I could get even better if I can dial in the usage at idle.

Is there application that can do that?

On another note, I can't seem to figure out why my Google Calendar won't open a "New Event" it just sits on the Loading... Screen

View 6 Replies View Related

General :: Acore Processes Running Amok On Jelly Bean?

Aug 6, 2012

I've been flashing ROMs built on the latest code for Jelly Bean (4.1.1). (The phone is the Galaxy Nexus LTE.)

The battery has been draining fast and upon checking with OS Monitor, I learned that a bunch of android.process.acore processes, sometimes alone and sometimes with another, have been registering high CPU loads continuously until they run the battery down.They are Contacts Storage, User Dictionary, and DRM Protected Content Storage. (DRM is probably not an acore service but it is making trouble just the same.)

I tried winnowing down the problem by deleting the contact store data and resyncing while de-activating third party syncers like HacSync. I even tried cleaning up the contacts via Google on the web. The contacts number only a few hundred. Again, the processes up claiming huge load after the initial sync period.

I scoured the web for reports but have only found mentions dating back to Gingerbread or ICS involving Facebook. Facebook sync doesn't work with JB and again, I have disabled HaxSync.

I also froze User Dictionary with Titanium Backup but that did nothing to keep the process from running, even after a reboot.

View 2 Replies View Related

General :: SD Card Partition

Aug 28, 2012

If I wipe data/factory reset or format sdcard in Clockworkmod Recovery, will it delete the partition that I created on my SD card?

View 1 Replies View Related

General :: Swap On EXT Partition

Dec 13, 2012

is it possible to use swap on a sd-ext partition? I started to use simple 2ext and I don't know if it's that possible.

View 1 Replies View Related

General :: How To Partition Rooted O+8.31z

May 21, 2014

As the title says how do I partition O+8.31z

O+8.31z had a very small internal mem. as we know 165mb

I do got 4gb mem. and I would like to partition it to use as my internal memory. So I could download and install game or an app as I want.

View 2 Replies View Related

General :: How To Create SD-Ext Partition

Jan 11, 2012

I am trying to create an sd-ext partiton so I can move applications and backup to that partition on my 4GB external SD card.

I've got ROM Manager 4.8.0.8 but when I select Partiton SD card it reboots and tries to reformat but I don't see anything on the Card just a LOST.DIR folder. I can't read the system messages when in Recovery mode cos it all happens so fast.

I tried via ADB and booted into recovery and selected the option to partition manually but still nothing. I reformatted the card with FAT32. Nothing.

View 7 Replies View Related

General :: How To Create Partition For Micro SD Using CWM

Mar 4, 2013

How to create a partition for the micro SD using cwm.?

View 9 Replies View Related

General :: Create New Partition On SD Card

Nov 6, 2012

I am having some issues with my Verizon Samsung Galaxy Tab SCH-i800. So the first issue is i tried to install a stock ROM to fix a corrupted cache partition. Now it tries to boot US Cellular. As of this moment the error i get when i put the device in recovery mode goes as follows:

E:failed to mount /cache (No such file or directory)
E:Can't mount /cache/recovery/command
# MANUAL MODE #
E:failed to mount /cache (No such file or directory)
E:Can't mount /cache/recovery/recovery_kernel_log
[code]....

I am wondering if i can just create a new partition on a new SD card? i bought this device on ebay a couple weeks ago and i don't want to continue attempting sketchy leads for fear of hard bricking it. I am very good with performing commands via command prompt if that is necessary, also i have access to an Ubuntu 12.4 computer if that would make things easier? Also as far as i know this is equipped with android Froyo and the issue developed after the previous user attempted to update.

View 1 Replies View Related

General :: Swap File - Partition

Dec 31, 2013

I just took over a second hand chinese android phone which appears to have swap enabled already.

The following is on the phone with SD card installed or removed completely

Terminal Emulator - Free - swap 196604 53036 143568
Diskinfo reports it as zram0 [swap]

The value of swap changes continually, so swap is active.

There is no swapper or any other swap app installed. How do I go about finding out how the phone is configured and if necessary undoing what was done and reconfiguring if necessary ?

View 2 Replies View Related

General :: How To Mount System Partition

Jan 16, 2014

I have rooted my xolo a500s IPS using farmaroot but when I tried to mount system r/w for pushing some apps and removing some on system partition but it is not mounting because of that i cant make changes on system.how can I mount system partition

View 9 Replies View Related

General :: Internal SD Partition Or Folder?

Sep 12, 2012

but is the internal SD in ICS a partition or a directory on the system that pretends to be an SD card?

If it's a partition then I don't really see the benefit over an external SD - except where there is no SD slot. Obviously if it's a directory then it would grow as required...

View 5 Replies View Related

General :: How To Remove SD Card Partition

Sep 8, 2012

I've been having a few problems with partitions recently, how do I remove sd card partitions???

Also why is minitool wizard taking so long to write partitions, especially 500 mb?

View 1 Replies View Related

General :: Can't Mount Cache Partition

Feb 9, 2013

my verizon galaxy tab 7 (sch-1800) doesn't boot, it freezes on samsung splash. I already restored the stock rom, but it doesn't change anything. if i try to restore default with recovery mode, it says E:failed to mount cache.

View 4 Replies View Related

General :: Data Partition Full - Yes With DF But No With DU

Nov 1, 2013

I got a notification that my filesystem start to be full, I was really surprise so I take a look to it with the shell and here is the result

root@android:/data # df /data/
Filesystem Size Used Free Blksize
/data/ 2.0 G 1.9 G 59.2M 4096
root@android:/data # busybox du -sh *
200.0kanr
336.5Mapp

[Code] .....

336M + 222M + 217M = 785M
So where is the others 1.2G ?

View 1 Replies View Related

General :: GT-N7000 - Formatted EFS Partition?

May 13, 2014

I own a Galaxy Note (GT-N7000). Suddenly the IMEI went null/null and baseband unknown. Tried many things to recover from this but nothing seemed to work. I left the phone with the latest stock rom (Jellybean 4.1.2)

I then installed EFS Professional (rooting the phone first and installing BusyBox) and could connect to the phone with EFS Pro. I tried doing baseband and IEMI repair, and though the log showed it had successfully restores from .bak files in /efs partition, IMEI and baseband were still null.

So then I totally screwed it, hitting the "format EFS partition" by mistake (it was 3am by then) and didn't make a backup first. The phone wouldn't boot, so I flashed the latest stock rom again and now it continually loops when showing the Samsung logo when I turn it on. I can turn it on in download mode and recovery mode. When on recovery mode, it says /efs partition not found so I guess that makes sense.

The question here would be: is there any way I can fix it without sending it to service? Some options that sound possible:

- Flash the phone with some other custom ROM that would repartition the whole phone, thus creating an /efs partition again

- Use some nice software to recover the /efs partition

I'm sure that if a service can fix it, there should be a way I could do it as well.

I know my IMEI number (it's in the sticker on the back of the phone) so there should be a way to restore it into de efs partition, right?

View 9 Replies View Related

General :: Partition Definitions Under Android 4.1.2?

Dec 24, 2013

[URL]

I am looking into one of the unhacked devices.

how I can unlock the bootloader.

I want to understand which of the partition contains the bootloader and which contains the recovery...

Is there any guide to looking at the partitions in a hex-editor or something and determining if its a boot, recovery etc...

View 3 Replies View Related

General :: System Partition For ICS Sense 4.0 For HD2

May 18, 2012

What is the system partition for ics sense 4.0 for europian hd2? How long it takes for first boot.

View 2 Replies View Related

General :: How To Remove CWM From System Partition

Aug 5, 2012

If my understanding is correct, tools such as CWM Installer and RecoverX are made so that users with locked bootloaders will have the privilege of using ClockWorkMod recovery. I myself used these tools. However, now that I have unlocked my bootloader, I want to remove the CWM they installed onto my system partition. I want to know where I can find it and how I can delete it? The reason why I want to get rid of such is because the kernel I'm using now already has CWM and I see no point in keeping a separate one stored on my system partition.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved