General :: Touch Screen Repeatedly Doesn't Work For Few Seconds On Galaxy Note 8.0
Jul 3, 2013
I have noticed that after the last update, my touch screen doesn't work for a few seconds on random occasions and then works again after about 3 or 4 seconds. when I'm reading a book and they're about to reveal the mystery or enthusiastically playing a game and it stops working, I get increasingly frustrated that I can't turn the page or that I lost the game because during the last few seconds my touchscreen decided to temporarily stop working.. I just want to make sure there's not something wrong internally.
I was in the pool when I dropped my phone in it. It was only submerged for about 2 seconds. I was at a friends and they didn't have white rice so i had to put it in brown rice-- all day. Then today I put the battery in it and it acting the same, everything works but when I touch the screen it doesn't do anything. It has now been in a air tight sealed bag full of white rice for about 3 hours... It still doesn't work.. I have college tomorrow and I need my phone...
my touch screen doesn't work or work sometimes on the different place where i touch.I remove the protection from the screen and make a reset to the fabric settings but problem is still here.Early i can make a calibration but now i can't do this.Problem is worest every next hour.Now is a problem also to unlock the phone,i do this once in ten or more times.
i have a samsung galaxy S1 with cyanogenmod, and i don't know what happened but when i turn on the phone it just stay on the loading screen, something like this : just a black screen with that little loading icon in it (without animation) i tried running both recovery and downloading mode (V+/v-,menu,Power) but nothing works too, and there is another strange behavior, sometimes, it show me the "Downloading.... do not turn off target !!! " message, when it is in that screen, the pc does recognies the samsung driver but i have no access to it, and Odin doesn't find the device
I recently ungraded my Samsung Galaxy GTi1900G with Cyanogenmod 10.1 ROM following the instructions exactly as mentioned in their site. Installation has smooth and absolutely no hiccups, phone is running smooth like butter.
Only annoying thing is sometime the screen is getting locked out all of a sudden during any activity like browsing, watching videos on youtube, etc.It keeps locking off immediately after I unlock the screen and this continues for 10 12 times at a stretch before I can finally unlock the screen. This incident is happening 2 - 3 times a day and is quite disturbing.
PFA the attached system log that I captured once during the issue, I was surfing youtube in FullScreen mod and during the capture the screen locked out twice. The screen locked out 6 time during this instance bu in log only last two have been captured.
i just got my note 2 and week ago and until yesterday when i hold down the home button to get to my tasks manager it wont work. Ill hold it down but it will vibrate but nothing comes up -_- im not sure if i turned something off or if its broken. anything i should try before i go to the verizon store or something?
I bought a Galaxy Note GT-N7000 in Indonesia. (PDA: N7000DXLC2, PHONE: N7000DXLC1, CSC: N7000OLBLC2). The installed languages are asian languages (+English), so I would like to change the firmware to a European version, since I would like to have Hungarian language on the phone (especially but not only because I would like to be able to type messages with Swype). My plan is to change to this one: N7000XXLA6, N7000OXXLA1
The question: The new firmware belongs to a different location than the old one.
I have Android 4.1.2 on my new Samsung Galaxy Note 10.1. I also have the most recent version of Facebook Messenger. I've enabled the chat heads option in the settings, tried the "pop out chat heads" option by holding my finger down on a conversation...and nothing!
I have a xi electronics chinese crappy tablet, it came pre rooted. So I changed he cpu governor and I pressed apply, after that it stuck , and I needed to reboot using power and vol -It booted up but now my TouchScreen doesnt respond on my touches!, I have already tried factory reset using adb , didn't work.
I'm using Samsung Galaxy S Plus (I9001).Whenever I connect it to my notebook for charging the touch screen starts acting weird either not responding or responding with lag.I have tried other notebooks, PCs and another USB cables but still problem is there.I also have tried other ROM.
I dropped my phone and the screen won't turn on and doesn't respond to touch.The insurance company is picking it up tomorrow (*hence the urgency) and would like to get some stuff off it. Most stuff is on my exsd, so I'm not too worried if I have to wipe it, but would prefer only to wipe it once everything is off. I'm rooted and have a custom stock based rom and cwm installed.
Is there any way of doing this? I have the lock pattern enabled so when I plug it in nothing shows up.
I haven't had any screen issues in the past, but today my tablet randomly decided to go totally black on me. I looked online and some posts mentioned to check if the screen was actually off, or just stuck at 0% brightness. So I got a flashlight and it turned out that I could see the screen in the light of the flashlight, very faintly. I tried to manually change the brightness setting, but that didn't do anything. I tried to go into 'power saver settings', but the 'screen brightness' power saver setting is stuck on and won't uncheck. Restarting doesn't fix it. Plugging it in to the computer or an outlet doesn't fix it.
I haven't downloaded any applications that override the screen brightness.
I'm using the Galaxy Note 10.1 (not the 2014 version).
I have bought a HDC Galaxy Note 3 N9006 1:1 Quad Core model.
The specs are:
MTK6582 Quad cores 1.3GHz Cortex A9+SGX544 GPU Ram : 1GB Rom : 4GB(Support TF Card up to32GB)
First of all, the biggest problem is the battery life.. The phone is on for about 1 up to 2 hours of semi-heavy usage. The screen brightness is set to the lowest one and still the battery life is really low. I dont know whether this is a software fault or the chinese battery is simply crap, so i dont know if there is any point in buying a genuine Samsung Galaxy Note 3 battery.
Secondly, i have an error on some of my apps saying that "Google services that some of your apps rely on, is not supported by your device.. ( screenshot included)" how to fix this problem on this HDC model?
Thirdly for some reason i keep on getting a message about roaming, ( i cant see the message fully, screenshot included) and i have to register my network again for it to disappear for a short period of time and then i have to repeat the same process again.
Lastly, i cannot update my youtube application and i get an error saying that i need to uninstall the previous version of the app. But the problem is that it wont let me delete the previous version.
I have the screen timeout set to 1 min which works fine until I use the phone. When using the phone the screen times out (and locks) in about 5 seconds. This is a real pain when using voicemail etc and you need to interact with the keypad.
I searched for Froyo keyboards with no luck. Multi Touch doesnt work and neither does Swype. I'm thrilled with Froyo but really really really miss my keyboards...are there any APK's out there that will work with Froyo yet?
Help me in resolving the below issue. I have three image buttons on screen. All these three buttons controlled under ontouchlistner as below. My problem is, as it is under multi touch event handler like above, it does not detect when touch all three button at a time to try to produce multi touch effect, instead it detects only one imagebutton touch at a time even though i touch all three image buttons. As i am developing this project on Android 1.6 SDK, is there any problem accessing my requirement(multi touch) (or) it is a known issue? I am hoping that, when it works for single button touch, why shouldn't it work when clicking three imagebuttons at a time to produce three logs printed as per my above code? Code...
I flashed a rom then i went to flash gapps the bar was loading then it went off the screen and it didn't do anything.i waited about 5 mins and still nothing.i hit the power button and it shut off i go to turn it on and all there is a blue light where notifications show.black screen nothing else...
I dropped my Note 2 yesterday and the screen started slowly turning blue. This morning, the screen completely got filled with blue/white/messed up color, and then went completely black. Touchscreen still worked though because I was able to maneuver around the phone right after it was dropped. Screen was not cracked. does the screen has to be replaced as well or i can replace it with smaller parts?
I'm trying to set up a tasker profile that will save some time (and my phones hardware...).
In a nutshell: When using a particular app, I would like the screen to turn off after a short period of time, but (and here's the bit I can't figure out) allow it to be unlocked just by touching the screen (i.e. no hardware button presses required). Is this possible with Tasker?
My galaxy s2's screen has occasionally stopped responding, the os was still running and everything so it wasnt frozen, my touch screen just simply stopped working. Only way to fix it was to hit the back of the phone and do a battery reset. This issue started poping up more and more, and now it won't respond.
No custom roms/kernels have ever been installed, has always run off the stock. Never been dropped or had water on it (I took very good care of it).
The nav bar at the bottom (back/search/options/menue) and hardware buttons all work. Everything above the screen no longer works.
What iv done: I've reset the phone, did a bettery pull for the night, fully charged it, looked at the board and checked all the connections (all good). Would flashing a custom rom/kernel be something to try next? Why would the bottom nav bar work but no the rest of the screen? Could it be locked somehow? If it is.. how would I unlock it?
How to make Viber and Tango (both chat app) work for multi window mode on Galaxy Note 3?
I tried Viber and Tango, Both doesn't open multi window or support any. I know it can't be open two of them on the same window but it should be open with other apps on the same window on Galaxy Note 3. Some other apps like Chaton, Youtube can be open two windows on the same screen ( it has two split windows so you can watch two different youtube on the one window. For example, you can open two differnt snow boarders on one window and compare them. It is awesome.). Multi window mode works with other apps fine.
last month i broke my glass screen, so i ordered a replacment, today i gave my friend who was sure he can do it to replace the glass screen. cut to the end, he did replaced it, but the screen shows black , it appears that the touch screen is ok becuase its make sounds of touching but the screen is black..
Has anyone else noticed this? With the phone laying on a table/counter/couch, the touchscreen normally doesn't respond at all. When it does, it's very glitchy, and pretty useless for anything that requires a swipe (like navigating home screens). I've tried all sorts of combinations of what finger I use, angle, and pressure, but it seems like as soon as I pick up the phone and do the same thing I was doing, it works fine. Just me or no?