General :: THL W100 Won't Boot Up After Flash - Preloader Checked
Aug 4, 2013
I flashed a THL W100 with sp tool and stupidly left the preloader checked, it finished all good and show me the green circle, but now it wont boot up and when i try to flash with any w100 rom it says the rom is not compatible with this device..
I have Sharp SH837W, when I try to install CWM, I wrote it to address 0x0 and it is bricked. I know I write something over its Preloader.
I tried but can't write down preloader again.
I tried to find TestPoint, maybe I found it but I don't know what should I do with it. I connect the test point with USB -5v and connect cable but still can't write anything (I got error 5054 in SP Flash Tool).
When I try to access the camera (from any app) I get a message says Cant connect to camera. I already tried different roms. once a while the camera return. I cant get what is the problem. I tried different solutions from other threads in the forum, but nothing ).I use the official rom.
I used insecure boot and root trying to root my phone, which was a huge mistake as i noticed a few minutes later since i cant startup anymore and only get into bootloader.
Now I'm trying to flash my stock rom back.
My CID is VODAP102 and my Version is 22.214.171.124 so i downloaded the rom and tried "fastboot flash boot boot.img" the result is: sending 'boot' <8192 KB>... FAILED <data transfer failure <Unknown error>> finished. total time: 0.158s
I am currently running BH2 1.6 no twiz. I was thinking on trying the galazy 1.6 but on the BH2 1.6 no twiz thread. It says that flash boot and phone only once, why? I want to go back to 1.5. should I only flash PDA? Why BH_MAN says only flash boot, phone once?
I try to understand android boot sequence on my JB (under CM10). I found some docs and there should be specific partitions (boot, recovery, system, cache, data).
My understanding of the boot sequence is now:
A) normal boot: 1) Power ON -> 2) bootloader -> 3) boot-partition where i flashed the kernel aka boot.img -> 4a) system-partition with the OS (libs, UI, etc) where i unpacked over CWM my customROM.zip -> 4b) data-partition, where i unpacked google-apps.zip and installed all the apps -> 4c) cache-partition with user data
B) recovery boot (adb reboot recovery): 1) Power ON -> 2) bootloader -> 3) recovery-partition with CWM where i may unpack all the .zip stuff to proper partitions, or restore from sdcard, etc.
Is this correct? I wonder, because i didn't installed CWM into recovery-partition. It cames from install of CM10 (fastboot -i 0xfce flash boot boot.img), so it must be in boot-partition and not in recovery?
So, next confusion: i looked up to /proc/mtd and i don't see neither boot nor recovery partition here:
I did a backup with CWM and loocked the data. There aren't boot, and recovery backups:
# ls -lha /sdcard/clockworkmod/backup/2012-10-04.18.49.55/ d---rwxr-x 2 system sdcard_r 4.0K Oct 4 18:56 . d---rwxr-x 3 system sdcard_r 4.0K Oct 4 18:49 .. ----rwxr-x 1 system sdcard_r 1.6K Oct 4 18:54 .android_secure.vfat.dup ----rwxr-x 1 system sdcard_r 54.6M Oct 4 18:55 cache.yaffs2.img ----rwxr-x 1 system sdcard_r 360.2M Oct 4 18:53 data.yaffs2.img ----rwxr-x 1 system sdcard_r 212 Oct 4 18:56 nandroid.md5 ----rwxr-x 1 system sdcard_r 214.6M Oct 4 18:51 system.yaffs2.img #
So, i think i didn't understand the boot sequence and partition schema corectly.
Instead of seeing the boring old Android logo or my service provider's logo, I'd love to see the standard text-based Linux boot screen that shows the status of all the hardware and configuration info as my phone boots. My current phone is an HTC EVO 3D running Cool ICS with Sense 3.6 and Revolutionary CWM.
Installed flash 10.1 today and since then...won't boot up at times, screen orientation won't switch, lock-ups, pages hang, multiple reboots etc. How do I uninstall this? I've looked on the phone and tried to research online without any luck so I have turned to to the real experts. Help! Thanks in advance.
Given a listview that shows checkboxes next to a list of people, I want to be able to get the names (in Strings for example) of the people who are checked. I have set my listview mode to allow for multiple checks.
Will get the positions but I can't figure out how to iterate over the listview to get the names. Also Eclipse tells me that getCheckItemIds is not a valid method for ListView.
I have a ListView that just contains a CheckedTextView. I have a very simple CursorAdapter that populates CheckedTextViews. When I click on an item, I can see that I am responding to the correct row, store the value in my model and the CheckedText gets checked. However, when I scroll down and then back up again, while I see that the model contains the correct value (in #bindView), calling #setChecked on the CheckedTextView has no effect. Ie All items are unchecked. Code...
I am using a ListView in which only one item can be checked at a time.
This is my custom list_row.xml :
I populate the list in onCreate() using a normal array adapter :
When the list is displayed, I want to have, say the 5th item, in the list as Checked. How can I go about doing this? I know CheckedTextView has a function called setChecked(), but how can I get my 5th item from the list to apply this function on it?
I have list of checkboxes in list binded by Custom simpleCurserAdapter. in my Custom simpleCurserAdapter ive override the newview and binview with my modifications. ive managed somehow to do multichoice.. wierd thing after i delete any item from my list , the first item's checkbox is being checked all of a sudden.. how does that happen? how can i solve it?
code: my curser SimpleCursorAdapter class:
I couldnt find another way of doing this, but this is how i set listeners to my checkboxses
Now this is code part from the ListActivity class which desbribes the button which deleting the checked Box items
I have a RadioGroup view inside a LinearLayout. The radio buttons are added from dataList. If I call the code below from inside onCreate, the correct button is checked. However the dataList can get updated from time to time and after that happens I call this code again, without destroying the Activity. After that, the view is redrawn but no button is checked. I suspect the RadioGroup checked-button bookkeeping is getting confused by the removeAllViews call. Any ideas what might be going wrong?
Ive got ListActivity and i am using custom CursorAdapter. in each item of the list ive got also checkbox. now i have in my list screen a perm button, when you press on it, it should find all the checkboxes which are 'checked' and do some operations on the item which it's checkbox is 'checked'. how can i retrive all the checked ones? ive done focusable:false, so i can use OnClickListener, but i dont know how farther then this..
The problem is that when I filter the list the entries switch position in the list view. Take for example three entries: 'A', 'B' and 'C' where 'C' is checked beforehand (i.e. the entry at position 3 in the list). When I type a 'C' on the keyboard, only the 'C' entry is displayed (as intended). Now 'C' is not checked anymore, since the entry has moved from the checked position 3 to the unchecked position 1 in the list.This behavior leads to some not very welcome effects in the app. Is there a way to "move the selection with the filtering", i.e. bind the checked state to the entry and not to its initial position in the list? Or do I need to find a new approach?
I've got a dialog which shows a list of checkBoxes. I'd like to set different boxes checked each time the dialog is showed. But that only works the first time.. I want it work every time the dialog is showed!