last week i decided to install cyanogenmod on my phone.Im using international version of Galaxy Note GTN7000.
I saw there was a windows installer on cm website..but wanted to make a backup of my current rom.. i rooted my phone using kingo android root..installed rom manager..flashed latest clockworkmod recovery.. but on booting into recovery,i found stock recovery was being forced..i read somewhere it was because of unlocked bootloader..
on cyanogenmod wiki page,i found installation of clockworkmod recov using heimdall..everything went fine ...blue progress bar was shown in the download mode...and when i rebooted into recovery mode i saw the first danger sign..there was a yellow triangle beneath galaxy note logo..
and then it booted into clockworkmod recovery 5.8..Foolishly i did a system backup..rebooted...surprised to find phone went into black screen after displaying a note logo with yellow triangle beneath..tried recovery from clockworkmod without hope but that didnt work as expected...
All i need now is to install cyanogenmod 10.1.3 stable on my device..i dont want a custom rom backup anymore..'
So my galaxy note 2 is continously bootlooping. As soon as I insert the battery into the phone, it shows the galaxy note 2 screen and a couple seconds later the same. I can't enter download mode because when I click the Volume+ button to enter it, it starts from the galaxy note 2 screen.
I had flashed cyanogen mod 11 to my phone a couple months back, but it was working fine. Today morning some water got on it, but I dried it of and it was working fine.
I SOFT BRICKED my lg e730 while trying to install HarshGinger v3.
I tried to root my phone, and everything was ok until I tried to install the rom. I saw in recovery how the rom was installing, and when all was completed the phone entered into a boot loop. I think that I should install first a stable cyanogen mod and then harshginger.. I think this is what I done wrong. The phone it`s soft bricked because I can reach to the emergency mode screen.
Question: I can do a reboot from ADB or I have to use KDZ? KDZ looks like the type of program used by the smart people and I`m not really that smart. I am looking for a simpler solution, like a combination of buttons or something.
I flashed the stock rom on my note 2 and it went on an infinite boot loop and i cant use the phone.i cant get in recovery or download mode because when i insert the battery it automatically starts the phone?
Note 3 SM-N9006 stuck on bootloop and usb debugging disabled!!!
My Samsung note 3 Sm-N9006 was already rooted when I bought it, though it doesnt have CWM/TWRP and SuperSu. However, all rooted apps are working. So I really want to change the phone's font so I downloaded Font installer *root*, because no font style is available in the settings. However, after I installed a font from the app, it prompted me to reboot my system, I clicked it and when it boots, its already stuck on the samsung logo.
Whenever I use the button combination vol down + power + home, it just opens normally; when volume up + Volume down + power / Volume up + power + home / Volume up + power, this is what is shown,,,
Select boot mode: [VOLUME_UP to select. VOLUME_DOWN is OK.]
[recovery mode] [fastboot mode] [normal mode]
volume up moves between these options, volume down doesn't do anything, nor power button neither home button so i can't choose from them.
The display of my galaxy note is broken. Ihave a few important sms on it and need to save them before i send my device for repair. How can i do this if i can not see anything on the display? I am using an ics 4.0.3 leak on it.
I've been scouring the internet for the last view months since initially attempted to root my admittedly out of date htc view. A friend gave it to me in exchange for an old comp I built. I attempted through revolutionary to root, went through HTC and unlocked my device, continued to try and root it but found no proper software that worked to do so. Even tried something called mulitool which was pretty cool, but didn't get the job done. After a time I gave up on rooting, and my tablet powered down and I found myself stuck at the recovery screen. None of the options for clear storage, factory reset, or anything else proved fruitful. I removed my sd and was able to boot up fine. This was months ago. Now I'm having a similar problem only now even without SD card it's in a boot cycle where it boots to recovery for 30 seconds or so and shuts down, then back to recovery and like this ad infintum.
my screen reads:
relocked **security warning express pvt ship s on rl microp 0656 hdboot 1.14 0005 radio 1.05.01 eMMC-boot
i installed flyrom v4 in ma htc explorer through clockworkmod... When i tried to reboot it stucks in the htc splash screen..Still not coming to home screen. And i partitioned ma sd card ext2 using minitool and i linked it thru link2sd... But it doesnt mount in clockworkmod... But flyrom instaled perfectly...
My Android phone is soft bricked it is an VS870 LG 4G Lite Lucid II.
This is the second time my phone becomes bricked due to my last incident with my samsung. It has nothing to do with it being rooted, but uninstalled some apps in the phone which I thought had nothing to do with the system. IDK last one I uninstalled was zappos. I know how to un-brick my phone, but my only problem is getting the phone to be recognized by my computer. I tried uninstalling and re-installing the drivers, removing the battery from the phone, using different USB ports still no luck . Could it be that the battery percentage went below 75%? if so I have no way else to charge, it does not seem to charge anymore?
I have an Allwinner A10 clone (Kurio 7), it is designed for kids but otherwise a standard android tablet. After hours of googling I rooted and installed CWM & Gapps (not included in the stock ROM). So far so good. The stock ROM was causing issues with some apps, it needed to go.
I flashed CM10 and it worked but no touch screen. It needed a compatibility flash to make it work. You can guess what's coming. I picked the wrong one and now the device does the following:
Reboot loop Black screen (backlight though) PWR+Vol up no longer gets to recovery Vibrates constantly between reboots (due to wrong patch I'm guessing)
ADB picks up the device for a split second between reboots but "adb reboot recovery" does nothing. Even when using wait command. Tried "fastboot flash recovery cwm.img" after wait command, no luck. Is there anything else I can try?
I'm trying to remove some softkeys from a ROM for the Galaxy Note. The Galaxy Note has a hw home button and capacitive back and menu buttons. The thing is, I like tablet ROMs because they use the screen better, but all of them come with Home, Menu and Recent Apps soft buttons added. On TW modded roms you can also find a multiwindow button to launch apps in multiwindow mod (looks like a "^"). So I just want to keep this button (maybe Recent apps too, I'll decide it later). I know how to decompile apks and edit xml's. What I want to know is which apks I need to edit and which xmls in said apps I need to edit/remove entries. I already tried to edit SystemUI.apk and tw_systembar.xml (deleted the entries for Home and Back), but UI crashed on startup and never come up again.
My Captivate wont go past the Galaxy S logo screen anymore and the bottom buttons stay lit. I can get it into recovery mode but I would like to save some pics and vids that I have on the internal SD card. Anyway to save files before I Odin flash this thing? Droid explorer sees the phone but wont show the paths/files.
I rooted my Samsung Galaxy S II Epic 4G and then decided to unroot it. I was using Odin3 v1.85 and about half way through it failed and the phone restarted. Instead of booting into the OS is just displayed a message saying
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again
. When I put it into Downloaded Mode it says
ODIN MODE PRODUCT NAME: GT-i9100 CUSTOM BINARY DOWNLOAD: YES (1 counts) CURRENT BINARY: SAMSUNG OFFICIAL
And when I plug it in to to my computer to try to unroot it again, it would not recognize the phone, it did not appear in device manager. I tried two different cables, two different computers, and re-installed the drivers.
How to update this damn thing once it's rooted so I can stop getting notifications every three minutes that there's a system update? I'm about to throw this thing against the wall and start using two tin cans held together by a string.
I had motorola defy before my xperia z. Defy had something called bootmenu which let me switch on adb while booting a ROM. Now i have xperia z, its bootloader unlocked, a rom cooked by my own which is in bootloop. It doesnt have bootmenu to do like i did for defy. How do i switch on adb from the phone's side? I have setup adb perfectly on my computer.
My ROM goes into bootanimation but adb doesnt seem to be switched on in the phone' side.
when i type "adb logcat log" it is stuck at "waiting for device " while the bootanimation goes on into bootloop
I installed an RUU with an update utility which fixed a WiFi problem I was having. Everything looked good so I immediately tried rooting with zergrush which seemed to work until my first re-boot. Now the phone is stuck in a boot-loop.
I have two utilities for RUU versions. I've flashed both of them at least three times each but its the result is the same every time. The phone boots normally the first time, then goes into loop on the next restart.
One issue that I noticed that when I re-lock the bootloader in fastboot, I get an error message. It goes something like...
(BOOTLOADER) Lock Successfully....
FAILED (unknown error)
However, when I go back to bootloader, it says **** RELOCKED **** at the top. Maybe whatever is causing the "unknown error" is also interfering with the re-lock procedure. It may not be truly re-locked.
I really just want to get this phone back to stock condition so that it works like it should.
my phone is stuck in a bootloop. and its Not rooted. all i can do is go to the boot menu. I want to use ADB to see if i can read the phone data (like sms...). Is there any chance that the device will be recognized when i connect it to the PC by usb with ADB?? or is it impossible? maybe ADB needs the phone to be operating normally to be recognized.
Are the framework-res and SystemUI apk's the only files that are involved in the boot process?
I only ask because I am currently stuck in a boot animation loop. I am able to communicate with my phone via adb during the animation loop and while in the bootloader recovery. Wiping the data and and factory resetting doesn't solve the problem.
I am thinking about pulling those two files from my wife's phone which is the same phone (Samsung Proclaim) and pushing them to mine.
When I am in a call on my Sprint HTC Hero, if I bring up the touch-keypad, hit the number 1 and then slide the keypad away, I get a message "Starting MMI sequence" and the call disconnects. The reason I discovered this is because I use Google Voice and I need to press 1 to accept a call or 2 to send it to voic email. But, when I press 1 and slide away the keypad, it disconnects. This does not happen when I press the actual keypad soft-button to get the keypad to disappear, it only happens when I swipe it down and away. It runs other MMI Sequences, depending on which key I press... (2 and 4 give me a dial tone to make another call, 3 gives me a popup that says "unable to conference calls", etc...) so is this a function of the phone (like a shortcut or something), or is it something that shouldn't be happening? Like I said, I don't think I've noticed it before the last day or so and I can't find anything about it in the manual or on any of the forums. Should pressing a button on the soft-keypad and swiping the keyboard away while in a call always run an "MMI Sequence"?
So it's widely known that soft resets of this phone causes problems with the icons as well as displayed program names.Has anyone noticed that soft resets also revert some of your programs back to earlier versions? The 2 I've noticed most often are Pandora and Mybackuppro. For example, the current version of Pandora is 1.1.1. When I upgraded from 1.1.0 in the marketplace, I installed over the old version and everything was working fine. After a soft reset, I noticed that the opening splash screen for Pandora listed 1.1.0, but the listing under my downloads in the app store didn't list an upgrade needed. I had to uninstall 1.1.0 and reinstall 1.1.1. I had that version on for about a week until I had another soft reset. Sure enough, I'm back to Pandora 1.1.0. The same thing happened with mybackuppro.This is far more irritating than screwing up the icons or displayed name, because this is actually changing what version of the software we're using.early adopters being the beta testers for mobile manufacturers and carriers.