Im not sure if there is a line of commands im not using but im trying to follow jcases instructions over at xda and i cant seem to get the bootimage to work, it says it dosent find my device, not sure what i am doin wrong, the commands are probably linux, im on windows, duno if it matters. i just get error device not found, i was using a different phone on adb yesturday.
I had been flashing roms with 4ext recovery since you can just use smartflash but after the last time I flashed a rom the rom wouldn't load and just kept rebooting the phone the the htc screen over and over again
I have an unlocked HTC Sensation and when i updated it when it was rebooting it got stuck at the htc screen for ages soo i took the battery out and now it gets stuck at the boot screen with the htc on it I Really am unclear
I've got an HTC One & I've already unlocked the bootloader but had to give the computer I was using up before I could install recovery or SU. SO, is there any possible way to get a recovery onto my One without a computer? Then I can just flash a rooted ROM. I am also still S-ON.
My phone is Huawei u8950 (unlocked and rooted). Just some time back i flashed a boot image
But after i reboot a bluee screen appears and i'm stuck there.. No even entering to recovery mode (vol plus+ and Power). I pulled the battery off and put it again, Still after the logo the blue screen appears and stays..
How to get to the recovery..? I had taken a backup to my SD card, but as i am not able to get in to the Recovery mode i'm not able to restore the back up...
im new in android and a couple hours ago i try to instal beanstalk - legacy kitkat 4.4 and they suggest to download kernel from dark raven "dark kernel cm11.0" 11DarkUrushi20131130 after that im flash the kernel and something happen....
my phone dont boot up and the logo dont appear
im try to connect to flash tool but still dont get it...
This problem began when I reinstalled Swapper 2 last night though I do not think it caused the problem. This was the latest app I installed on my phone.
After I installed this app, changed the settings and set the swapper file size to 256mb and power cycled the device the device wont boot at all.
It would give this vibration, and then nothing. Not even the back light of the display turned on. It tried to open CWM thought the power button and volume down keys but still the result was same as before. I don't know where to start. I am having real trouble in diagonalizing the problem.
My Device : XOLO A500 Rooted : True Android version : 4.0 ICS ROM : Stock Rom Kernel : Not Sure
I have a rooted android phone " G-TiDE E60 " With MTK6575 and Android 2.3.6 , the phone doesnt have a recovery mode it only have something called " factory mode " where i can test the mobile's performance and send reports
When i try to enter the recovery mode , it shows a screen with an android and a triangle " ! "
i tried a lot to install cwm with Mobile Uncle , and when i go to recovery mode after installing it , it shows the " G-TiDE " Logo and keeps on it doesnt show anything else
when i get different recovery.img files , sometimes it do the same and some times it shows a black screen ..
I just want to install Any custom rom to upgrade the phone to Android 4.0 or 4.1
Wipe Cache/Dalvik------------------ Main Menu----------------------------Reboot System
After installing the USBWOOT.zip by using TWRP, i hit the reboot system, but my kindlefire can not boot with newly installed android os. my kindlefire continue to get in TWRP again and again. I checked boot file on my kindlefire by using android-sdk-linux, but there is nothing in it.
How can i boot my kindlefire again? I think that installing icecream sandwitch is the last resort to use my kindlefire, because amazon does not offer os recover instractions and files.
i just bought a tuvva powerplay tablet..aka the game mid....it contains a rockchip 3066 cpu and 4 core gpu 400 ok iv been trying to flash custom roms on this for awhile..i never could..i got it rooted though..well then i heard of this thing called chainfire 3d thats supposed to improve fps...well i installed that tablet turned off...then it booted up with the logo..thats it..nothing more..i can enter the stock recovry..and my computers makes a bumpuda sound like its conntect..all i want to do is delete the dang chainfire thing..but i dont know how..iv tried using adp..
I have an HTC Desire X. I've unlocked this and followed all the required steps to install the custom rom.. but it just doesn't seem to install properly. Some files (apps) are installed, but the system remains stock.
I am new at rooting and installing custom ROMS at android.
I tried to root my android mobile (Qmobile A-900, which is a rebranded version of Gionee Elife E3 Specs and Data sheet) from here and was sucessful.
I installed "MTK mobileuncle" app from google play store which would reboot phone to CWM Recovery when i select "recovery update" option.
Next i tried to install a custom Rom and followed each and every step mentioned here "For CWM Recovery i follwed steps mentioned here"
I made by current stock ROM backup file into SD saved in path SDCARDclockworkmodackup Then in CWM recovery mode i selected Format data/factory reset , then Install from ZIP, Select the Downloaded Zip (selected the custom ROM zip which was 383 Mb, the screen then installed and i recieved "sucessfully installed message while in cwm which then said that i should Reboot my phone which i did.
But now i just get my old Stock Rom welcome logo when i boot my phone for 3 sec and then it restarts and the same thing happens again and again.
"I know its not bricked coz it still displays stock rom logo and starts for a while."
I did my first custom rom install (F1 nexus)which went fine but when I put astro or any other file explore on the phone it does not see my external SD card,even when I put what I think is the right path to the SD card.
i'm using RC's GingerXtreme ROM with Rage kernel. my device is LWW. unlock BL.my question is, why i can't move some application to sd card. it say, "Failed move application". i use link2sd, still cant move.
Itried to install iris custom rom in my lava iris 504q mobile without knowing it properly, this is what i did i rooted my mobile and and went to cwm menu and wiped all the memory and then went to update from sd card option, in which i had already had iris xperia v2 file saved. After 10 seconds its saying installation aborted, i think my phone is bricked , how to get my phone back.
I installed a custom rom, after following the procedures from here [URL]. but after i install the rom and reboot my phone it gets stuck at the HTC quietly brilliant screen. I shut it down and went into hboot and then recovery again. from there i installed wiped it and did a factory reset. then i tried to boot my phone, but nothing again. lastly, i tried a different rom, paranoid android. i installed it and get past the htc quietly brilliant screen, but then it gets stuck at the paranoid android screen. What the hell is wrong? can i get my phone back to normal?
i installed jellyblast on my galaxy ace gt-s5830i, used it for couple of days and then restored cwm backup to stock rom. after about a week the phoen booted itself and got into bootloop. when i tried to wipe data got this mesaage : E:format_volume: rfs format failed on /dev/stl11.
* i tried installing cwm backup * i tried installing stock rom from samfirmware using odin with/without pit. * i tried multiformatter for changing ext4 to rfs and then again tried unstalling stock rom and also custom roms. * i tried wipe firmware package.
* phone enters in bootloop when i flash stock rom using odin and get stuck on boot when i install custom rom through cwm.
compile a ROM based on CM10; what would make that ROM go into a never-ending boot animation on a clean flash (wipe data/cache/dalvik), yet boot up without a problem when dirty flashed over a CM9 variant. One might think that since a dirty flash over CM9 works, what about dirty flashing over a CM10 variant? What if it acts just like performing a clean flash and never gets past the boot animation?
Lets compound this by adding that once a successful boot-up after the dirty CM9 flash has occured; if one goes into recovery and wipes data/cache/dalvik, the ROM goes back into a never-ending boot animation.
I'm usin sony xperia tipo dual st21i2. Two days back I have rooted my mobile using unlockroot. Yesterday i was trying to install custom ROM, for that i booted my mobile in recovery mode using install.bat. In recovery mode took back up and wiped data and cache then installed the zip file(ST21i JBMP5.zip) from SD card and rebooted. Now the mobile got stuck with the screen showing JB MINIPROJECT and a circle was revolving in anticlockwise around the number 10. I pulled the battery and tried to boot in recovery mode but no use. whatever i do the mobile stuck with the same screen.