So I really want to upgrade my Rogers Samsung Galaxy Note II (SGH-i317M) to JB 4.3. I currently have JB 4.1.2. BUT, I'm currently rooted. I have used Framaroot to root my device and it's worked! When I get 4.3, I don't care if I have my data or not or if I'm rooted or not... Can I update through Kies? Will it brick?!
View 1 Replies
Interesting development:Galaxy S firmware update invalidates Voda warranties ? The Register.Have many people come across the upgrade in Kies? I tried about a week ago with a T-Mobile branded one and there was no update available.
View 8 Replies View RelatedI recently installed the latest version of Kies (1.5.3 or something) in order to upgrade my Galaxy S, but when ever I click the upgrade button it shows me this screen which tells me to backup all data and what not, but after clicking "Upgrade" it simply does nothing. Nothing at all. No matter wether I check the box where it asks about backing up contacts.I have firmware version 2.1 at the moment and I believe the latest is 2.2
View 2 Replies View RelatedI tried to upgrade my firmware on my Samsung Galaxy S using Kies.The Firmware upgrade appears to have gotten stuck.Upgradeing firmware Do not disconnect a mobile device from the PC during upgrade process Progress Bar has "Upgrade is in progress.." and is stack at about 1/3.The phone screen shows a green triangle with Downloading... below it and "Do not turn off Target at the bottom.
View 3 Replies View Relatedso i tried to upgrade from 2.1 to 2.2 through KIES this resulted in a failed upgrade, so i then tried to use Odin. unfortunately the firmware i flashed to caused even more bugs and kept restarting, So I then tried to use KIES/Odin to flash to a different firmware i now get two different errors
1. along the lines of storage is not ready - copying of default media fails
2. cannot mount a certain file - stl11. or something ?
One more time the Samsung kies has fail to update my galaxy s. I have done the below mentioned procedure. Firstly, make sure to backup all the important data present on your device. Download Samsung Kies version 1.5.1.10074_45 or something that is not the latest, you will need to uninstall the latest then install this one.
1. Connect your phone and open Samsung Kies and let you phone be detected as usual.
2. Keep Kies open, minimize it and run regedit in windows.
3. Locate HKEY_CURRENT_USERSoftwareSamsungKiesDeviceDB
4. You should see some folders, named 1,2,3 etc in that folder, look for the one that mentions your current firmware, IMEI number, etc.
5. Once you find the correct folder (only one folder mentions this information), you need to modify 3 strings by simply double-clicking on them.
6. Locate the following 3 entries and change their value to the ones shown below. (You may first like to backup their value data to a notepad file).
SoftwareRevision = I9000XXJF3/I9000SWC/I9000XXJF3/I9000XXJF3
ProductCode = GT-I9000HKDXEE
HIDSWVER = I9000XXJF3/I9000SWC/I9000XXJF3/I9000XXJF3
Now close the Registry editor and do a Refresh. So, while Kies is minimized and still open and connected to your phone, you have changed these 3 strings.
7. Click on "Firmware Upgrade" button in Kies and you should now see Kies saying there is one upgrade for JP6. Now wait and let the upgrade process to complete.
Note: "The above procedure is said to be working perfectly but try it at your own risk. Also, flashing will result in loosing the root if you were rooted."
After doing all this thing my kies has given message that upgrade is not done please remove the cable from your phone and recover software.
Last night I saw that there was an upgrade for Kies so I went ahead and downloaded it.After the download completed, I tried to connect my Samsung Captivate to Kies via USB. Kies now just sits there saying Connecting to device, but will not connect.I have tried this several times and cannot get it to connect. Even tried restarting the phone and my computer.
View 5 Replies View RelatedI have an Samsung galaxy pop(gt s5570) I want to root and upgrade it to gb 2.3.7 or ics .
View 1 Replies View RelatedHaving waited for FROYO for a while now I was really pleased that Kies had an update which I think includes the Froyo update. I downloaded the update but my phone is not showing as connected in Kies mode. If I attach the phone in mass storage mode it is recognised!Having only just switched from iPhone to Android I cannot believe how shyte Samsung/T-Mobile have been with the software for such a great piece of hardware.I have tried rebooting laptop and phone as well as reinstalling Kies.
View 4 Replies View RelatedWhen I first heard about Kies about 2 months or so ago, I still was using my Galaxy Nexus, so I installed the software, followed the steps, and it never got past connecting. Move forward a few months, and now I've got the S4, well, Kies still gets stuck on connecting...this software just refuses to work. Why it won't work, or how to get it to work?
View 6 Replies View Relatedhow to root Karbonn A3+ and also upgrade to ICS if possible
View 2 Replies View RelatedI had backed up my contacts from Samsung phone through Kies to my system.Now I am moving to Nexus 4. how to move my contacts back from my system to Nexus.
View 4 Replies View RelatedI saw in samfirmware.com that there is already an official Android update for my device. If I download it and use Odin to install, will it erase all data in my phone (contacts, messages, games, etc.)?I know using Kies to update my android will not delete anything...
View 1 Replies View RelatedI am having SAMSUNG GALAXY S ADVANCE GT- I9070.I have upgraded my OS to Jelly Bean 4.1.2, but I am encountering many problems like freezing of screen, high RAM usage, games not running as expected, etc.
I want to get this problem rectified by re-installing the firmware, but there is no option in SAMSUNG KIES showing Re- Install the firmware..Is there any other way to get this problem rectified??
I would like to know if it is possible to upgrade/downgrade an android phone (samsung mostly) with official firmwares without the need to root? The reason is that some testing is needed on these devices and only with official firmwares it would be valid. And at will it would be nice to be able to switch versions for different test purposes.
View 1 Replies View Relatedi have a problem on samsung galaxy y duos gt s-6102, the device is not able to update the software, either through the device or through Kies, this happens after the bootloop then flash the firmware,
View 1 Replies View RelatedI used DroidMod to root when I had 2.01. When 2.1 became available, I "un-rooted" then forced update to 2.1. Well to be honest, it is really slow and laggy. I now want to go back to DroidMod, but nothing I have tried seems to work.
View 1 Replies View RelatedAnd everything works perfectly! Ok i had to do a factory reset after the update (after backing up my contacts), but now it works faster, is more beautiful and of course Flash player is installed. A lot of little neat things were added as well. So i am happy and you should be too! Go update through KIES! Froyo should be there!
View 11 Replies View RelatedI created a torrent on Demonoid if your d/l speeds are killing ya on the other options. If you don't have an account you have 2 weeks from today to find it. I believe that is the non-user limit. If you need an invite, PM me and ask nicely and I may provide one.
View 20 Replies View RelatedI could not get it to connect at all today, but it had worked in the past, so I tried various things, including turning Kaspersky AV off - but it didn't seem to help.I tired a few other things and I think the solution may be to turn wifi off.
View 11 Replies View RelatedI have a samsung S2 with Android 2.3.3 - I9100DDKE4
The problem is due to some reason the USB does not work and the ota update says no update available. I want to upgrade to newer versions of Android. However without the USB Connection i cannot.
how i can upgrade may be through the SD Card. Is it possible..
I have had kies on my computer for about two months. My phone connected fine and I could save messages and contacts. But now after this kies update I just sits there and says "Connecting the device... Please wait" This is rather annoying. I've tried disconnecting and reconnecting, persists to do the same thing. I tried clicking some buttons. It says something about you can't do blah blahh when there is a firmware update. I didn't hit the firmware update button so it shouldn't be downloading and update.
View 3 Replies View RelatedChecked this morning and there is a new Kies (dated 15/10) available for download from the Samsung mobile UK site. In addition there is also a firmware update. I've installed Kies but not the firmware update yet.
Does anybody know if the firmware is 2.2?
I have just bought a Galaxy S on Ebay, and I was expecting to have the traditional chinese installed instead of the simplified... I am wondering if it's possible to install an additional language onto the current os? or if there's a way to do this?
and as well, I am having problem syncing KIES with the phone... W7 64 Bit Ultimate always tells me that it fails to install the drivers.. and nothing happns afterward.. I have read the previous emails that Samsung is currently having issues with KIES with Galaxy S.. is it true? I guess we will have to wait for samsung to come out with a new version of it? I want to upgarde the firmware but now the KIES is not working, I guess the only way is to wait...
Don't see quite this issue:
-Windows XP Pro fully patched to SP3 running on Toshiba Satellite P104.
-Loaded and installed Kies, direct DL from Samsung Website, supposed to be latest version as at 10/10/2010.
-When I connect the phone, I have it set to prompt for type of connection. I select Kies, and it immediately shows "MTP Application, screen flashes, shows "initializing" with 4 dots running. Screen then flashes, and it says the same thing over and over.
-Windows Device Manager shows MTP Application supposedly working and installed under "Portable Devices"
-Kies shows "connecting to device" forever, then quits and never connects to device.
-Immediately I unplug the USB from the phone (only way to quit the cycle, pressing the home screen key does not do anything) Windows immediately prompts and says "Windows has installed device drivers but they may not work until you reboot your computer.
-Naturally I reboot my computer (have done several times, and with the phone connected to various different USB ports, and checking to make sure a flawed driver is not lurking in device manager, it doesn't show one there).
The phone DOES connect in Storage and Internet mode, just fine. It only does this if trying to connect in Kies mode, or in Media Player mode.
ALSO, this phone DID connect to Kies at my ex workplace just fine, so it seems unlikely it's the phone. I never had tried to connect to this laptop, only since I lost the job and am at home for awhile. So.............. Can anyone assist me with how to get the computer to properly load the correct drivers so that it will recognize my Galaxy S?
I have a problem connecting my galaxy s to my pc using samsung kies. when i press the "samsung kies" option on the phone, nothing happens on the pc. I've tried this on two computers but still it will not work! however i can connect my device using "mass storage"
View 3 Replies View RelatedThere is a new version of kies available 1.5.3.10093.31. I couldn't get it from the update within kies, so quite by accident I clicked on samsung widgets and it said I needed the latest version of kies, click ok to download. Am downloading right now and it's taking ages so haven't had a chance to see if its any better but will post back when I have had a chance to see. It has just finished installing and as soon as kies started it came up with a fatal error and closed down, so I think that just about says it all. Will report back later when I have had sometime to try and sort it out.
View 29 Replies View RelatedI just finished dealing with Samsung Technical Support. First, a lengthy session w/ online Chat, ending with
"Diana: I am sorry, but we have reached the limit of our technical knowledge on this product. I am sorry,we at the chat support provide the basic troubleshooting information for our products,our agents in the voice support provide the next level of support for further assistance.
Diana: I suggest you to contact Samsung Technical Support at 1-888-987-4357 ...."
So, I went to online phone support, and was eventually told that Samsung has no Kies, mini-Kies, or any other support software for the Samsung Vibrant in with 64-bit computers (i.e. computers running Windows 7 in 64-bit mode). I assume this means that the 32-bit software works fine, as most 32-bit software does, but the hangup (no phone pun intended) is in the drivers. That's why it choked when I connected my phone and it tried to install the drivers. Can't use the software without the driver, and can't use the 32-bit driver in 64-bit windows.
Before online phone support told me it was impossible, she did send me to this page, to do a download of mini-Kies: http://ars.samsung.com/customer/usa/jsp/faqs/faqs_view_us.jsp?SITE_ID=22&PG_ID=2&PROD_SUB_ID=55 7&PRO...
I don't know why she thought the one Samsung makes available when someone clicks through their support links was not good enough, but she was very definite she wanted me to use the other one instead. Here's the general Vibrant support links for downloads:
Samsung
from:
Samsung
Incidentally, while I was getting Online Chat support, I was told:
"Yes,it is compatible with the 64 bit windows also."
She also said that the full Kies (not just the mini-Kies) would be made available for the Vibrant, but since she was wrong about the 64-bit, ....
The phone support person did tell me that Samsung is working on making it available for 64-bit, but had no idea when that would be. She said, loyally, "soon."
I wanted to use Samsung's Kies software to connect (tether, with the USB cable) my phone to my laptop to use as an Internet connection. Now I can't do that until either (a) I find a 3rd party app that does this, or Samsung gets around to developing 64-bit drivers.
Anybody have any experience with using any 3rd party apps to tether to a 64-bit Win7 computer, for Internet service?
As I think about it, I think there's no excuse for Samsung having wasted so much of my time before telling me it was impossible. The pages their website lead me to said nothing about it working only for 32-bit. The software did not check to see if I had 64-bit and warn me it was fruitless. Online tech support said it would work with 64-bit. The page the phone tech support person took me to did specify 32-bit. Only then did I find out that I'd wasted all of this time. My time wasting was increased since I worried that maybe there was some problem with my laptop, so went through the whole process again with my desktop before trying to deal w/ Tech Support.
procedure to upgrade samsung galaxy5 OS from 2.2 to ICS.
View 2 Replies View RelatedIf we put aside the fact that Kies has many problems and that connecting the phone through usb is a real pain I found a solution that some of you might be interested in. I wasn't able to connect to KIES a few days ago no matter what I tried. I wanted to back up some contacts etc but couldn't. Also I wanted it to work in case froyo comes out.
Anyway I found out the reason why it didn't work. Instead of using touchwiz I was using the launcher pro interface. Turned out that if I wanted to connect to KIES I had to switch back to the touchwiz interface and then connect the USB. Don't ask me why this worked but it did.. So if you have problems with KIES and aren't using touchwiz my advice is to put it back on in case you need to connect to KIES.