I have a bricked Samsung Galaxy S2 and have been doing some research on how to fix this. There is a lot of info online, but I don't understand most of it as it is too technical and I need having it translated into layman's terms!
- Galaxy S2 (GT-I9100)
- Purchased from Kogan 2 years ago (no longer under warranty)
- Appears to be Polish stock based on the packaging and manual
- I am in Australia
- Phone is stuck in boot loop, unable to get past the intro flash screen that says Samsung Galaxy S2 GT-I19100.
- It keeps resetting itself and going back to flash screen infinitely. I need to remove the battery in order for it to stop doing that.
- I'm unable to get into the mode that would allow me to do a factory reset, however I am able to get into download mode.
What I think I need to do, but need verifying:
- Download Odin onto my PC. (I think Odin is software that allows me to access the core of the phone via my PC, is this correct?)
- Download the correct version of the operating system. From what I can gather, there are different versions depending upon which network you are with. Because my phone is unlocked, I need to get an unlocked version but I'm not sure whether I should get one designed for Australia or for Poland (or whether it matters)?
- Connect PC and phone via USB cable
- Turn on Odin
- Somehow use Odin to reinstall O/S on my phone
- Are the steps above correct or am I missing something?
- Does it matter which version of Odin I install or can I just do a google search for Odin downloads?
- Where do I find the file I need to reinstall the O/S?
- Where can I find instructions on how to use Odin once I have the correct file to install?
i bought a white Samsung galaxy tab 4 7.0 8gb white from Canada and i decided to turn ART on so i did and the tab was stuck on the boot animation for over 30 minutes. So i went into recovery and deleted cache and data. It booted up fine and i was relieved. Before i did anything on it i turned on ART again and it boot looped again, stuck at the boot animation. This happens every time i turn ART on this tablet. No i am not rooted and i don't have any custom ROM, kernels, or recoveries on this tablet. try turning on ART on their galaxy tab 4 7.0 and see if ART works?
I dropped my Samsung Galaxy Attain 4G from a height of about 3 feet onto a marble floor. The battery popped out, but there is no physical damage as far as I can see. The phone automatically went into a reboot loop, by which I mean it flashes the "samsung" logo again and again. It doesn't turn on or off. After removing the battery and sim card several times to no avail, I searched some of these forums and found the 3 key combination (volume/power/home) which can be used to get a factory reset. Now, I have gotten that factory reset screen where I can scroll using the volume key, but my phone stays on that screen for about 4 seconds before reverting back to flashing "samsung." This is where I stand as of now.
Yesterday i tried updating my android to Ice Cream Sandwich following some tutorial i found but i missed a step and didn't downloaded Clockworkmod Recovery or made any backup , and i think that USB Debugging is off because my pc doesn't recognize the phone ... I tried going into Android system recovery and clearing data and cache , and i tried with odin mode by pressing volume down, home and power but i got stuck on downloading screen for 2 hours so i gave up ... Now only thing left on my sd card is ics aura rom..
I installed the stock firmware on my Galaxy Pocket(i.e., XXLF5 Version). Then this morning i downloaded the MakDroid ROM. and installed it through CWM recovery. But after that my phone just keep restarting to the SAMSUNG Logo and freezes there after vibrating several times..
My Samsung Galaxy S3 (GT-I9300) was rebooting itself for the past few days, randomly. Last night, it did it again, but didn't boot back up. Instead, it is now stuck on an infinite boot loop - it gets as far as the splash screen (Galaxy SIII logo), then reboots, on a loop.
I've never tried to flash or root the device, I only used the official OTA updates from Samsung.
The first thing I tried was to remove the battery, SIM card and MicroSD card for 5 minutes. I then wiped the Cache Partition through the Android Recovery Mode. I then flashed using the Samsung Kies recovery procedure. This didn't work. I then tried a Factory Reset through the Android Recovery Mode, multiple times. This also didn't work. The last thing I tried was to flash the ROM using Odin3. I used the firmware version appropriate for my region and carrier. Everything was successful, but I'm still having the same problem.
I tried to view the boot logs with adb, but of course, the phone won't stay on for long enough to establish a USB connection. I'm not sure what else to try.
I installed Cyanogenmod 10.2 a few days ago, and has been working fine up until about an hour ago. My phone basically locked up while I was using Spotify, so I did a hard reboot, and got stuck in a boot loop. I tried to reboot a few times with the same results. I didnt have much on my phone, so I did the factory reset (using Teamwin recovery), but after that the phone was still stuck in the boot loop. After that, I tried the "Format Data" option.
After going through, It was still stuck in the boot loop. I've also tried to restore backups, but to no avail. I'm not super knowledgeable about the whole inner workings of rooting. I didn't want to do the advance wipe (includes internal storage, system, USB-OTG) for fear of really messing something up. If it completely restores to factory settings, i don't really care, I just dont want my phone to be completely unuseable.
I had my Galaxy Pocket rooted and got the Jellyblast v3 rom, it was doin fine until I checked on the app OTA and check for update, a new update appeared which is the Nemesis 2.5 Hybrid-Holo Editon. It asked me to download it and so I did. When it was done, it asked me if I wanted to install it and so I did, and rebooted. Later I noticed that it was already boot looping. I tried pulling the battery off and to clockwork mode, with the proper procedure..the holds and presses, but still it just kept boot looping. Tried to connect it to the PC using the USB chord and yet it just shows the charging icon and sooner it turns to white. I tried Kies but still it turned white screen all over again; no device found.
I'm not sure if this is considered a boot loop but when turned on, after the logo it turns into a blank screen.
Anyway, I was stupid enough to install 3D chainfire when it's not compatible (I neglected the description since it worked on my previous galaxy ace) ...
I've tried going to recovery mode to: - wipe data/factory reset - wipe cache partition (but shows error)
Not sure what else can I do anymore. Since Ace 3 is fairly new, it's quite hard to find a solution with google.. Also, I have zero knowledge about flashing ROM or of the sort..
Extra info: - My phone is Samsung Galaxy Ace 3 GT - S7275R - Rooted with a Chinese universal rooting program - When entering recovery mode, it shows "no command" for a few seconds before entering the menu.
My Samsung Galaxy Ace (S5830) running under a custom ROM The Ultimatum (I've been using this custom firmware for a few weeks now, with no real problems up until now), is bootlooping with no apparent reason. On a rare occasion, most apps on the phone stopped responding and would crash upon opening, and would require a restart before they worked again. Well this happened to me a few hours ago, so I decided to reboot my phone. After coming back to check my phone, I had found it was still booting. This has gone on for several hours now, and I've tried turning it on and off, removing batteries and everything. It's stuck in boot loop. I found this was odd, as I have had no dramas with the firmware I've been using. I have not made ANY recent changes to the phone whatsoever, so I can hardly believe it would be my fault.
how do I fix this without wiping all data and installing a clean ROM? I have a lot of stuff in the internal storage I can't afford to lose, and it's really important to me.
in an attempt to get "adhoc" network support,I did the following installed and ran "Smart WiFi Scanner" which recommended, and I installed some "WiFi Library" to support adhoc networks
I uninstalled the library app. installed and ran "ZT-180 Adhoc Switcher" (the app requested root access, I granted it, then the system shutdown abruptly - i.e. immediately off, not normal shut down)
I turned the phone back on, and tried running the "ZT-180 Adhoc Switcher" app a second time again phone turned off instantly.Now it boots up, system is fully running and loading home screen etc. but then reboots after about 7 seconds, and just continues in this loop.
I have a Galaxy Nexus with the volume buttons spoilt (not functioning). It is rooted and running on AOKP's 4.4 rom. I accidentally installed the wrong kernel and while panicking, I wiped the data and davlik cache. Now, I am stuck in boot loop. Also, when I plug it into the computer, the phone is UNAUTHORIZED according to adb server.
Is there any way to authorize my phone without booting into the OS itself? or Is there a way to boot into bootloader/recovery without authorizing the phone and without using the physical buttons of the phone?
I've rooted my samsung galaxy mega 6.3 GT-I9205 but I got stuck in a boot loop after trying to change my boot logo using a app called root tools. Before that everything with root worked fine.So I tried recovering the phone by going into recovery mode and wiping all of my data/factory reset and also wiping my cache. Both of these thing did not work.
So after that I went into download mode and tried to instal something I believe CWM. But now I can't even go into recovery mode because when I try, the phone says that it's going into recovery mode and then just reboots... and goes into a bootloop.
i tried to do the one click clock work mod on my samsung fascinate with the phoenix kernel on the root of the sd card. everything went succesful but whe it turned back on, it kept looping, first the samsung logo appeared than a samsung.com logo followed and just looped. i cant go to any menu... cant get into hard reset or anything else!!
My Samsung Stratosphere turned itself off sometime and now is rebooting to the Samsung logo, and then turning back off, and rebooting (a couple times earlier it booted to the main android menu, but turned back off immediately afterwards) and when I plugged it into the charger it acts like it's charging and then turns off and acts like it's charging and over and over again, even when the battery indicates that it's at more than half full.
(No custom ROMs or anything, it's all standard btw). I took the battery out and everything and it still does the same thing when I put it back. I tried to do a factory reset, but the recovery mode screen always jumps away when I try to activate it (I press both Vol+ and Vol-, recovery mode screen comes up but goes instantly, then the phone goes into a boot loop again).
after my phone crashed / went unresponsive after a call I did what I've gotten used to doing which is taking out the battery to reset it. Though, this time I had the charger in which I'm guessing is what made the phone corrupt. Now I'm stuck in a boot loop with no way to reset it. Recovery mode doesn't help and I'm guessing there's no hardware reset button. I've never rooted or installed anything that's not from the free market. I'm living in Sweden but bought it in Germany so am reluctant to go through the hassle of returning it. Or does samsung have som kind of world wide warranty?
My samsung moment (NOT rooted with 2.1) gets stuck in a boot loop when I restart it. After about 10 mins the lock screen comes up and if I unlock it quick enough the phone runs fine but if I dont unlock it within a certain period of time it will just go back into booting up and go back to showing the samsung logo.
The phone has been running very sluggish since Ive been experiencing this and Im about to do a factory data reset but I dont feel like reloading all my apps and redoing all my settings. Does anyone know of a way to fix this without resetting the whole phone? anyone else experiencing the same thing? any help would be appreciated. Im about to get a blackberry, I love the android when it works but it just seems the slightest adjustment to the phone sends the whole thing haywire. Living with this aggrevation is becoming not worth it.
I recently just rooted my evo 3d sprint with the the boot 1.5 and everything went well. I decided i wanted to overclock my phone so i followed zeemaxs way. Before going into the overclock procedure i decided to do the the RCMIX Evo 3d kernel v. 2.2.3 first so i would have better results when done with the overclock procedure.I boot-up the kernel through the recovery mode on the phone butit failed to load so i just rebooted. After that my wifi and 4g stopped working. So i downloaded an app on the market called "flash image GUI" which lets me flash the kernels through the app. I flashed the RCMIX kernel and rebooted and now im stuck ima boot loop. I COULD just go back and back up to my old rom and settings etc but the problem is i dintmake any kind of back up or recovery i think.
Tried this ( the terminal emulator method) xda-developers - View Single Post - [MOD] STATUS BAR MOD'S 'Change the colour of your status bar and now pulldown ' then got a boot loop. Had Clockwork installed and created a backup, but now cannot return to clockwork mod recovery, only the stock recovery. I need to get into clockwork without going through ROM manager.
I was running Team Jellybeans V5 No Problem for the last little while (on my T959d)Everything worked great (minus a few glitches here and there of course)Saw the update for V6, downloaded, and flashed with CWM.
Did the wipes, (cache, dalvik and factory) did the wipes again after reboot,Now Im stuck in an infinite bootloop, (goes to samsung splash, then Devilkernel Splash, then CWM where it shows cannot mount e:/ (cycles too quick I can't see it..) then it just reboots and continues, I can't boot the phone into CWM recovery, can't boot into download mode, tried USB JIG, doesnt do anything,I can't adb my phone, can't ODIN..
Tablet hangs in Bootloop after installed cm9_nightly_20120721 + protab2xxl_compatibility_1.2.0 startet from cwm 220.127.116.11. Noticed that the "/data" partition only has 15MB of Space with 0B Byte free. I wiped the cache after installation with cwm, i am not able to boot to cwm again because key combinations not work on this device.
Got a T15A Generic tablet which has the same Hardware than protab 2 xxl, Goclever A103, Coby 1042 etc..how to get CM9 or CM10 running?
I spoofed my device S6312 to galaxy nexus using network spoofer to download an incompatible game from google play store.According to network spoofer everything worked great but nothing actually happened and that game was still incompatible on play store.So I launched network spoofer and told it to recover my device again to S6102.It said that the device will reboot so I gave it permissions and my device started rebooting but it stop at the Samsung logo and was doing the same thing again and again so s actually boot looping. How to recover my device and any way to do it without a computer.
My galaxy s3 is rooted and cwm installed.I have changed a default dpi and rebooted to find my self in constant boot loop.I'm at the brink of flashing my rom to a custom one to see if it works but very scared to do so especially not knowing much about it.I have performed hard reset by going into recovery mode but it didn't work.
I have an Android tablet (Diablotek D2-721, very cheap I know, but it serves its purpose) that is stuck in a boot loop. The real problem here is that this device apparently does not have any sort of recovery mode and being in a boot loop means it does not get recognized by ADB or any firmware flashing software.
I researched all day yesterday perusing forum after forum but almost every single solution requires booting into recovery.