General :: Samsung Galaxy Ace 5830 - Lost Data Connection And Msg After Flashing ROM
Dec 17, 2012
everytime i installed a custom ROM preferrably CM7 Apocalypse, i always lost my data connection, i dont know why this thing happen, then last time i installed CM7 Apocalypse again (changelog dated 9/7/2012 by itasoulas) i still lost Data Connection though i follow the instructions given, plus i cant receive a message even though i installed a messaging app. im tired im reflashing my phone back to Stock Rom over and over again .
All the sudden today i just lost my 3g data connection. I actually saw the airplane symbol for a min or two as well. I toon it to sprint and they couldnt get the data connection back thy tried some kind of "activation" which didnt work then they wanted to have the phone for a day which j cjldnt do today. Now i disabled the 3g on the phone and turned it back off and on again and it said it was runnjng the activation again but this time t ran through and i turned 3g back on and the arrows show up but they never flash but i am on the pjone now posting this.
what are the settings do you have to change in order to completely stop any data connection? I have an unlimited data plan so I don't care now that there is a lot of apps using my connection, but going overseas soon, the roaming charges are really expensive. I found some settings (like sync) that I can configure not to use data connection but I am not sure if these are all.
If my screen locks while I have a wifi connection, then the connection is lost when I unlock the phone.First, is this perhaps deliberate, to save power? Also, either way, when I unlock the screen and go into wifi settings, I see that the phone is trying to make a wifi connection, but it never succeeds, even though it's my home network and I'm in the same room as the router. It just states 'Obtaining address.
Took my HTC Desire to Italy and since then have lost all mobile data connections - though works fine on WiFi. Switched on airplane mode for flights, and switched off data roaming to reduce overseas costs. But when switched back on to use internet couldn't get any network connection. Now back in the UK still same issue - no internet, and cannot send MMS picture messages - even when in strong 3G signal Tried all the options I can find but no joy at all.
When my data connection (3G) is lost due to lack of signal sometimes it never reconnects again, despite being in an area of high signal strength. I have 'always on' mobile internet toggled. To solve this I have to turn the phone off and on again, which is annoying.
I have a Samsung i7500 (Galaxy).Originally, it had Android 1.5 installed, but I could not enter the Google Market with my google account and got this message: "Can't establish a reliable data connection to the server".I read here and across the web I should Factory-reset my phone, but it did not work.So I upgraded the firmware to Android 2.1 using this guide: How to Mustymod It worked, and now the phone had Android 2.1 installed, but I still cannot access the Google Market with my Google account. This time I did a factory-reset (Settings -> Privacy -> Factory reset) and also followed this guide to delete the provider-settings (eventually I removed the whole /data/data/com.android.providers.settings/ directory and not only that file.
I have a Galaxy Note GT-N7000, running rooted 4.0.4 ICS with Franco Kernel.
Now I wanna flash CM10 on my my device and was wondering, if I create a Nandroid backup before flashing, can I restore my apps and data after I flash it? I mean, am l gonna still be able to retain previous messages, whatsapp conversations, game scores etc...
When viewing sites with a lot of Flash ads like GameFAQs I get an annoying popup telling me that I have lost the data connection and the page could not be loaded. Only the ads are not loading, but I'd like a way to ignore or fix this.
I have installed many applications on my Galaxy Grand duos, with binding the applications data to External SD card (32gb), what will be the best practice to backup all the application and the data before installing another firmware? I don't have enough space on internal sdcard to unbind the application data.
So I recently rooted my phone and switched to the Kangerade 1.1 rom running a chevy kernel. I pretty much have no issues EXCEPT for the fact that maps wont function unless I am on wifi. Once I am using 3g I just get data connection lost, and then it loops....I am using version 4.3 of maps, my wife's phone is also rooted with kangerade using a p3 kernel but with maps 4.2 and she gets the same results.
II would like to flash my Samsung Galaxy 3 (right now Froyo) to use it with Kyrillos' ROM v7.5 under Mac OS Lion.
The only program capable of that I found (in this forum) is the Wineskin'ed version of Odin (v3 1.85). But that does not detect my phone in download mode and also has other buttons than the version Kyrillos speaks of in his manual (there you are asked to "select ops", while the Mac version of Odin only lets you select "PIT"s or chose a .tar-file for one of "BOOTLOADER", "PDA", "PHONE" and so on).
So, three questions:
1. How can I get that version of Odin to recognize my phone?
2. What do I have to select in that version of Odin after solving question 1?
3. Otherwise, are there alternatives to use (except a Windows computer or a virtual machine running Windows)?
On my Samsung galaxy s3 I have 2 flashing arrows under my wifi bar.. I went to Samsungs chat and the first time I was told that it was because I was transfering data but I wasn't. She then told me to do a soft reset so it did and it still continued. Then I went back on because the first person told me it would eat up my data if I didn't break the transfer. The second lady said that all that means is that it's showing that it's connected to my router and is normal and won't use my data..
I have Samsung Galaxy S GT-S7562 After rooting and flashing KyleOpen custom rom, the mobile worked just fine but there's no network while calling or receiving a call.. I went to maintenance service and they told me that it needs New main motherboard or something
I have xtouch X1 with MT6589 SoC. have lost my IMEI while flashing a Rom i have tried many different methods but none has worked and in baseband version it says unknown and whenever i try to type in IMEI via engineering menu it says can't send AT command and i have flashed back to my stock rom via SP Flash Tools but even that didn't work, I have tried terminal emulator method MTK Droid tools method but none has worked even tried to replace the file of IMEI one but still same.
I have a Samsung Galaxy S2 with Android 4.0.3 XXLPQ.It's rooted and now has CM9 installed.Unfortunately for some bizarre reason I have no internet connection. I've installed a different modem and it hasn't fixed the issue. APN settings are correct (I've spoken to my network). Sometimes it works absolutely fine then after a few moments it just won't load anything and I get a 'No internet connection' warning. Apps won't work either due to no connection. However I do have a 'H' and sometimes '3G' next to the signal bars. WiFi is working fine. Have full signal.. I've started from scratch and wiped everything several times and re-flashed xxLPQ but still nothing.
I flashed with "CWM-touch_i9082_chotu.tar.zip" and the the rooting as per this [URL] and it was successful.
But I installed font installer and gave access via superuser and after reboot, it dint turned on ( stuck on bootloader "Samsung")..
So I flashed SGG with stock rom via Odin and the phone got on, and again tried to flash "CWM-touch_i9082_chotu.tar.zip" but this time , i dint got the CWM. I am getting android system recovery instead on CWM... I cant root again!!
I tried flashing "CWM-touch_i9082_chotu.tar.zip" 3 time but only bin counter is rising.. i am getting android system recovery 3 <e> only...
After reading the forums and changing settings and doing a few battery cycles, I had been getting really good battery life of at least two days on medium usage and 3 days on light with my connection not having any real issues. Then, 2 days ago I installed weatherbug and beautiful widgets. While I enjoy both, it seems like my network connection goes down fairly often now and I need to turn on wifi to check email or do anything else web related. Has anyone else lost their network connection and been able to narrow down the cause? I'm hoping it's not one of these two, but I can't imagine what else it would be.
After I "upgraded" my OS to 4.2.2 using the auto-upgrade feature on my Samsung Galaxy Grand GT-I9082, I've lost a huge number of features, including the following. Unfortunately, I didn't note my original OS, nor have I taken any kind of backup of it (not that I know how to!).
- Multi-window option has been disabled, and the multi-window toolbar has disappeared.
- Camera, Gmail and one more App that were available as icons on the lock screen are no longer available.
- Earlier on receiving a call, I could send a message with several pre-set options such as "I'm in a meeting", "I'll call you later", I'm driving", etc. This is no longer available.
- "Favorites" option has disappeared. This is a BIG inconvenience!
- When I go to "Phone", I always get the "keypad" page. Earlier, I used to get whatever page I was last on (keypad / logs / favorites)
- The text size has mysteriously (and unnecessarily) increased, in the "Logs" page.
- "Favorites" option has disappeared; I can't mark any contacts as "favorites".
- Long-pressing on any contact would give me several options, including sending contact details to anyone by message. This, and many other options, have vanished after the upgrade. At present, there are only three options: 'Edit', 'Delete', and 'Add to Group' in the main "Contacts" page, and only 'Remove Member' when viewed in the "Groups" page.
- The number of data fields in each contact in 'edit' mode have drastically reduced. Most importantly, due to removal of the "Notes" field, I have lost all the info I had entered in there: miscellaneous info that didn't fit into any other field.
- When a call is being dialled or is in progress, I can't turn on the Bluetooth because the button has been removed from the 'Call' page. Earlier, I could quickly turn on the Bluetooth and switch to it even as the call was being dialled or was in progress.
- The number of fields in each event in the calender has been drastically reduced. Most importantly, I have lost the ability to set reminders, as the 'Reminders' option has been removed. I can set events, but not reminders for them.
- The left button on my phone (the 'options' button) has no functions in the 'date' and 'event' pages.
- I can't rename folders in the gallery any more.
- More than half the options (available by pressing the left button) have disappeared.
WIDGETS, APPS & OTHER FACILITIES
- The "Alarm" widget has been removed, and I really miss it. Now I have to laboriously open the 'clock' app, scroll to the desired alarm and activate it. Earlier, I had set three or four commonly used alarms in the widget and I could set them directly from my desktop!
- Earlier, if I long-pressed the right-hand button ('Back' button) of my phone, I got a hidden pull-out menu that contained the icons of a whole lot of useful Apps that I could access quickly. Also, this pull-out menu permitted multi-windows (splitting the screen between two different Apps). This pull-out menu is no longer available.
(b) Download & restore a better (not necessarily 'higher') version of Android on my phone?
(c) Backup my OS, or set a restore point, as can be done in PCs (if that's possible)?
My Samsung Galaxy Reverb has nobody willing to build CM10 for it, so I decided to take on the task. It built without error - processed the kernel and all the CyanogenMod 10 files just fine and generated the .zip. However, after flashing the .zip I end up with a Samsung logo, then a black screen.
The compile went through without error, so I'm a little lost as to what I should check next. From doing a little searching it seems the kernel is at fault, but what to do about that. Am I supposed to flash the kernel separate from the .zip that the CM builder outputs?
So recently I have started to have a problem with my Wi-Fi Connection on my Samsung Galaxy Blaze 4G , So I would be on the Wi-Fi fine then each time i click on a video it asks for "Complete action using" then my Wi-Fi instantly stops and the Wi-Fi icon isn't there anymore . After i clicked one of the option on complete action using, couple seconds later my internet comes back.
So problem is that each time i try to watch a video my Wi-Fi Stops when on Web. But then I can watch videos through the Youtube application.
Also Another weird thing is that after the Wi-Fi reconnects My "Use packet data" setting is auto enabled again.
I was running the JI6 2.2 with cognition beta5.5 and was attempting to update however I needed to swap kernels since the current kernel didn't verify signatures. I was using vmware on a mac and i started it but then continued to use the mac side however the computer disconnected the phone from the windows side and now it is stuck showing an image of a phone next to a computer with a triangle with a ! in it between the two. Pressing all hardware buttons does nothing but black the screen and go back to the same screen. I've taken out the battery, sim, unplugged the cord, everything. Can't get back into download mode to redo the kernal swap. It's definitely connected to a valid, and working, usb port and i am now on windows itself instead of vmware. What do I do?
I got a Samsung Galaxy Note 10.1. 2014 Edition. I love the Tablet, great for watching Youtube videos, and mostly for playing my retro games. But lately now I have a serious problem. I have Verizon Fios at home and whenever I try to connect my Wireless tablet to it It lags, it slows down, many times the connection comes up for a couple of seconds, then connection drops. I told Verizon about and they are going to send me a new router. it is a software connection issue with the Samsung Tablet? On my computer, I am getting 7 mbps download speed and 6 mbps when I am supposed to be getting 50 Mbps on my comupter.
I used flash tool to try to install recovery on my Lenovo A750. I used DA_PL.bin instead of MTK_AllInOne_DA.bin as download agent.
Now when the phone is turned off, it is not recognized (no MT65xx), and I cannot use the flash tool again. Beside this the phone works fine including 'regular' USB connection. What is "download agent" and what did I do wrong?