My Galaxy gio is rooted and is with a clockworkmod recovery. Yesterday, I tried to flash a custom kernel. After flashing successfully (through cwm recovery), i reboot my phone and then it stuck at boot screen.I did many searches but cannot understand any.I can go into recovery and download mode which is i think so required by odin.I wonder if I can flash any stock rom again easily. Need zip file with which i can put in sd card and install zip through cwm recovery by which i can unbrick my phone. I tried wipe data and factory reset but nothing worked.
I restarted my phone because it was freezing and it turned on on the boot screen where it gives me options to Recover, Reboot, etc. The volume button broke a long time ago. It sometimes works to move the option but pushing the power button doesn't do anything. Is there anything I can do to restart my phone avoiding this screen? It goes there every time. Could one of the volume buttons be stuck?
! i was trying to install a new custom ROM ( C.A.M.P ) i had Cyanogenmod 10... i came to where i flash the new rom on my computer then when i wanted to fastboot reboot to install zip on phone, my computer shuts off, now when i turn my phone on it lights up black and stays like this and i cant do anything(no CWM no nothing) so i remove battery to turn off....
My device is rooted, i was installing an app that tweaks performance which needed drivers to be downloaded / installed. As soon as i clicked that driver download / install button the device immediatly shut down. Now i'm stuck on its boot logo (Its a Chinese tablet powered by a RK3066 Chip / android 4.1.1) I tried (Holding power + volume down) = Dead android logo with red exc. mark on top / (Holding power + volume up) = Nothing / (Holding power + both volume up and down) = Dead android logo with red exc. mark on top / (Leaving dead android logo for a couple of minutes) = resets and logo is still stuck.
I have no custom anything . I did not do anything with the root except download apps.
I also do not have linux.
When the tablet is plugged into the PC when the dead android is displaying , it detects, but that is it, i cannot browse it what so ever.
All recovery methods in the tablet are (dead android logo)
Well rooted the i10 tonight fine went to install the play store and got force close on alot of stuff hit the reset button as the tablet forze and it boots but wont go past the impression screen then huts of
Recently I have rooted my android tablet and I was exploring what I could do. One guy was telling me about an app that can work with performance in game(ChainFire 3D). He said it lowers the pixels in the game to run better. I tapped the install button and it said rebooting now. It then started to reboot but then proceeded to get stuck at the boot screen. I tried doing a hard reset but it is still stuck. I have also tried flashing the stock rom, but I get installation aborted when I try and install it.
I just installed the Android Revolution ROM for my phone, and I am now unable to get past the boot screen. I've been sitting here waiting for it to boot for 1/2 hour, before I took the battery out and tried booting again. Waited 1/2 hour again. Still no progress.
I had just made my phone S-OFF with SuperCID, and had flashed a new radio.img to my phone as recommended in the thread. After doing that, I went and used SuperWipe, and then I installed Android Revolution. Installation encountered no errors, so i was surprised when I was unable to boot.
I can still access 4ext recovery luckily.
EDIT: Wanted to point out that I was able to boot into my old rom after S-OFF, SuperCID and radio.img, but not after installing revolution rom.
Today my Huawei Ascend P1 got stuck on boot screen by itself, left it on the table and when I picked it up there was only a black screen with Huawei logo, and nothing else. I tried to turn it off - didn't work, tried pressing down button and power button, tried connecting it to the computer, but nothing seems to work, it's just stuck there and I didn't even do anything.
OK, one day I was able to open a Genymotion device, but later that day I wasn't. Reason?
When I opened a terminal (using CrunchBang Waldorf) and ran Genymotion, it would work fine, but then when I booted a Samsung Galaxy S4 4.3 , it would bring up the device fine, but it would get stuck on that "Android" screen, with the light going across.
I waited for a few hours, only to come back to the same message. I would open up the .Genymobile/genymotion-player.log using cat in terminal. The results?
I have an unlocked HTC Sensation and when i updated it when it was rebooting it got stuck at the htc screen for ages soo i took the battery out and now it gets stuck at the boot screen with the htc on it I Really am unclear
I was installing some custom ROMs on my brothers OT-955. Everything worked fine, I got CWM on there and installed a ROM called PAC [URL] ......
It worked pretty well, but the phone froze a couple of times a day so I decided to try some others yesterday. When I installed a CM-based ROM, I got a 'status 7' error in CWM and after I rebooted the phone was stuck in a boot loop.
After a while, it showed up when I ran `fastboot devices` and I was able to get it into recovery and install a different ROM. When that ROM had some trouble I ran into the same 'status 7' error with another one.
I miss-clicked and rebooted instead of installing a working ROM. Once again, I was able to reboot to recovery using fastboot and everything worked out.
Fast forward 30 minutes, the last ROM had some trouble too and I decided to move back to stock. CWM reported that stock was installed successfully so I rebooted.
Since then, the phone won't move past the boot screen. Fastboot doesn't recognize it, `adb` used to recognize it as offline until I replugged it.
I already:Reinstalled the device driver Cycled the power (empty, full) Tried a different host machine What to try next.
I received a generic Chinese table. it worked well for about two-and-a-half months. Then, just recently, I discovered rooting and the wonderful things it allowed you to do. I decided to download a system-tweak app, which included a CPU control. I was a little wary of overclocking my CPU, having heard it may decrease its life expectancy, but finally I thought "What the heck?" and in a brilliant stroke of genius cranked my 1Ghz processor up to 1.5Ghz, and it promptly froze, forcing me to power it down. When I turned it back on, I discovered that it had been factory reset. I re-installed my apps, including the system-tweak app, and decided not to touch the CPU controls for a while. Soon after, while at my sister's talent show, I discovered I had about 30% battery life, and I was still supposed to record her. So I figured I'd underclock it to save the battery.
Unfortunately, as my finger touched the slider, my brother bumped my arm and caused me to lower the CPU frequency to its lowest setting. It became extremely sluggish, almost to the point of being unresponsive, and finally I had to shut it down. When I restarted it, it started to boot but then got stuck on the shimmering Android logo, and now that's all it does. I can't even boot into recovery mode, and unfortunately I had just turned off USB debugging that same day.
I just replaced my LCD and digitizer on my Nexus 4 after i dropped it and the screen cracked. It was still in working condition after the damage, but the touch screen was unresponsive. The installation went pretty smoothly but when I went to boot it up after it gets stuck at the bootup screen with the 4 bubbles. I tried some of the solutions people found for a similar problem a few months back when Google released Kit Kat 4.4 for the Nexus 4 but none of them have worked for me. There doesn't seem to be any hardware functionality issues, just some software glitch that I can't figure out.
All I did was turn it off then screwing around I held the power button and vol+ and hit screen rotate lock switch as it was booting, then it read:
unrecoverable bootloader error
And thats it. unfortunately adb is not turned on and now the tab will not boot past the secondary booting screen that reads Iconiatab, what is worse since I still have the stock recovery I cant flash anything that I have found. I have tried to flash the Stock A200 rom that is supposed to be stock recovery flashable but it only gets about 1/4th of the progress line before the dead android with the triangle !! sign appears. and of course I dont have the cpuid or sbk, so I cant flash anything in APX mode either....
Any way this is the name of the rom that wont finish installing in the stock recovery flash : (Stock Rom)Acer_A200_AV032.RV09RC08_AV041.RV04RC02_PA_CUS 1_1330081316944_80bf3f7e_decrypted.zip
But any way the download is at 4shared, and I got the link from the Acer Tablet Forums)It is Titled Original Stock Rom, and it should have been able to have been flashed through the stock recovery, but di not, and I dont know if it is the rom, or the tablet that is the cause of it not flashing through the stock recovery....
And I have tried a few other update.zips to no avail, but that was the only full rom I found, and certainly the only one with the bootloader blob in it.
i just bought a tuvva powerplay tablet..aka the game mid....it contains a rockchip 3066 cpu and 4 core gpu 400 ok iv been trying to flash custom roms on this for awhile..i never could..i got it rooted though..well then i heard of this thing called chainfire 3d thats supposed to improve fps...well i installed that tablet turned off...then it booted up with the logo..thats it..nothing more..i can enter the stock recovry..and my computers makes a bumpuda sound like its conntect..all i want to do is delete the dang chainfire thing..but i dont know how..iv tried using adp..
I have a stock arc s. which is having official ICS update. I tried to turn on bluetooth and the fone froze and then it restarted. It shows the sony logo and then xperia logo and then again goes back to the sony logo. it is not rooted.
I have an HTC Evo 3D with boot v1.50 (unlocked using the official HTC device method successfully) TWERP v2.0.0 (the touch style recovery). I have "successfully" installed the MikRunny v1.13 CDMA ROM but I am stuck in the white HTC splash screen. I did not back up my original stock ROM (the worst mistake ever.) But I have wiped everything (except the / SD card/ portion of my external card) each time I try to flash a .zip ROM.
I have an HTC Explorer[Pico] and I installed Jaggyrom 4.At first I loved the jaggyrom but then I had problems like apps would not start for more than a 30 seconds after clicking.
I untapped the data option in mount2sd so it would be placed in the internal memory.After that I rebooted my phone. It's still stuck on the HTC splash screen for more than 5 minutes now.What should I do?
I tried to flash a custom rom on my huawei honor .. and after I loaded the bootloader.bin by terminal emulator.I restarted my phone and it is stuck on load screen and turn off after seconds. I can't go to recovery mod or anything .. all is what I can do is to go on the pink screen when I press volume up+volume down+ power button
I just flashed Myns Two point Two. I used to Amon RA to wipe the things I needed to wipe and then installed the rom. Little to say that when I booted, it got stuck on the boot screen.I've done a hard reset, booted to the loader, and wipe the data but to no avail.
Been creating a theme last few days. I installed it on my phone, but before doing so i was a good boy and did a nandroid backup. Then i didnt like osme of the things i changed so i restored my backup i just did now its stuck after restoring on the white htc evo screen. NOT GOOD!! I even pulled the battery and SD Card...twice.
Got the WSOD on a non-rooted, stock 2.2 incredible last night. Pulling the battery is the only way to turn it off. Recovery and Factory Reset from hboot manager hang at the htc white screen. Clear Storage also goes straight to the white screen. If turned off it'll charge. SD card is not corrupted. Phone was in close proximity to an iphone 3g for maybe an hour. (We'd been comparing the screens then the iphone was placed on top of the incredible while we ate dinner.) Noticed that phone was at the white screen. Battery was not warm. No signs of external damage. Either this is totally random, or the RF from the iphone managed to fry something.
alright well i was running flyx and decided i wanted to restore to a backup i made on 2.1 pre installing a rom. after the backup began it ran through and ended up at the motorola boot screen. stuck! this is the only recovery i have. now when i boot into recovery i get this message: e:can't open /cache/recovery/command