General :: How To Unbrick Phones Bricked Due To Chainfire 3D

Feb 2, 2014

How to Uninstall Chainfire 3D on bricked Devices ...

1. Connect USB cable and then restart your phone.Get your phone in Recovery Mode....

2. Check whether your device has been detected in the PC - Device Manager - Android ADB Interface.

2. Run "adb devices" - to make sure the phone drivers are ok (should output a long hex string and "device"). If Device Isn't Detected You need to install Adb Drivers... Download From: adbdriver.com

3. Run "adb shell" from command prompt. If $ came then Type SU. so it will automatically change to #. ( Means your phone rooted and you gain root permission to delete the Bloody CF3D driver from your phone.

*Tip*If You Get An Error Type "# mount -o rw,remount /system" - Press Enter.

4. Still in shell? Type "sh /cf3d_uninstall.sh"

if sh /cf3d_uninstall.sh doesnt work , try 'sh /system/lib/cf3d_uninstall.sh" instead.

Phone will automatically reboot and will be ready.

General :: How to Unbrick Phones Bricked Due To Chainfire 3D


General :: Motorola Razr D3 Bricked Due To Installing Chainfire

Apr 1, 2014

I was installing 3dchainfire on motorola razr d3 xt919 in process i hit restart and it wont start again.

View 1 Replies View Related

General :: Unbrick Hard Bricked Device

Mar 8, 2014

I hard bricked my GT-S7562 s duos and need a way to unbrick it.I was trying to port CM11 on my device while it happened.No problem if the way you know works for my device or not. I will try anything .

View 9 Replies View Related

General :: How To Unbrick Hard Bricked Samsung Galaxy Y Duos Lite (GTS 5302)

Nov 19, 2013

Recently, I got my samsung galaxy y duos lite gts 5302 hard bricked after installing a custom rom. I want to know to unbrick it, where i cn get the suitable tools, like stock rom and odin.

Is there any video on it???

View 7 Replies View Related

General :: Chainfire 3D On Android (4.4)

Mar 15, 2014

How to run Chainfire 3D plug-in powerVR lg gt540

View 1 Replies View Related

General :: Chainfire 3D - Not Open ZIP File

Jan 30, 2013

Whenever I try to install the plugins (clicking on for example libGLEMU_QUALCOMM.zip), I get the following:

Plugin
ERROR
Could not open ZIP file

Can this be fixed?

I'm running Gingerbread 2.3.6 and a MTK6575.

View 6 Replies View Related

General :: Chainfire 3D Have Broken GoClever Tab R83

Dec 25, 2012

So when I installed Chainfire 3D driver. After that my tab stuck on kernel.

My tab is GoClever Tab r83.

View 9 Replies View Related

General :: Chainfire 3D Doesn't Work?

Jan 15, 2013

i have a problem with this application, my friend today in school tell me about that application and i downloaded it free from google play product, when i installed it i run it, i have rooted my android already my version is 2.2.2, i started application and my friend telled me that i need to install driver when i install driver i run again but then i got problem, he just show me in second black screen and boop exit, i dont now what to do? I reinstall several times but nothing, i want this application because i think i can play some games with Chainfire 3d that i before cant play.

View 2 Replies View Related

General :: KArbonn A1+ After Installing Chainfire Not Starting

Mar 19, 2014

I have akarbonn a1+ duple, which i have rooted and installed chainfire 3d in it but when i clicked install c2ddriver or whatever it is in chainfire my phone rebooted and now it is not running just boot screen comes and do not runs.

View 5 Replies View Related

General :: Chainfire 3D Can't Install Driver Not Enough Space Error

Nov 16, 2011

I am using htc hd2 and wana play shadowgun on it. I downloaded its non tegra version..The game launches fine but it crashes back to home screen after the intro..So i downloaded chainfire pro .. but when click on install driver . The msg appeared dat " need 1022987 more bytes"..But i had 190 free ram ... 45 mb free phone storage and 4gb free on sd card..

View 6 Replies View Related

General :: Galaxy Ace 3 Stuck In Boot Loop After 3D Chainfire Install

Dec 23, 2013

I'm not sure if this is considered a boot loop but when turned on, after the logo it turns into a blank screen.

Anyway, I was stupid enough to install 3D chainfire when it's not compatible (I neglected the description since it worked on my previous galaxy ace) ...

I've tried going to recovery mode to:
- wipe data/factory reset
- wipe cache partition (but shows error)

Not sure what else can I do anymore. Since Ace 3 is fairly new, it's quite hard to find a solution with google.. Also, I have zero knowledge about flashing ROM or of the sort..

Extra info:
- My phone is Samsung Galaxy Ace 3 GT - S7275R
- Rooted with a Chinese universal rooting program
- When entering recovery mode, it shows "no command" for a few seconds before entering the menu.

View 9 Replies View Related

General :: Tablet Freezes At BootScreen After Reboot - Chainfire 3D App Installed

Oct 3, 2013

I purchased this Zync Dual 7 Plus(Haipad HD 7 Zync Edition) (Zync Z930 Plus in the Manual) and became fascinated by the world of Android OS. My problem is I downloaded Chainfire 3D app from Playstore as recommended by my friends. After installing, it require a reboot so I restarted the tablet and then I'm stuck on the boot screen logo. I manage to get to the recovery page using ADB reboot recovery command but my tablet only has a power button. There's no physical volume buttons everywhere I looked so there's no way I can reach the "wipe data/factory reset" option. ADB Devices command can detect the devices but it is giving me weird serial number as 0123456789ABCDEF, Fastboot is not detecting the device. USB Keyboard and touch functions are not responding when I'm in Recovery page.

What I have done so far...

I've read several solutions and one of them is to flash the tablet using the ROM provided by Zync support. DL it and open the RockChip Batch Tool but the tool is not detecting my device so I can't upgrade.

Also DL the LiveSuitPack 1.07 but also, It is not detecting the device and from the instruction given, you need to hold volume button again which I don't have.

View 7 Replies View Related

General :: Tablet Stuck In Boot Screen After Installing Chainfire 3D?

Feb 3, 2014

i just bought a tuvva powerplay tablet..aka the game mid....it contains a rockchip 3066 cpu and 4 core gpu 400 ok iv been trying to flash custom roms on this for awhile..i never could..i got it rooted though..well then i heard of this thing called chainfire 3d thats supposed to improve fps...well i installed that tablet turned off...then it booted up with the logo..thats it..nothing more..i can enter the stock recovry..and my computers makes a bumpuda sound like its conntect..all i want to do is delete the dang chainfire thing..but i dont know how..iv tried using adp..

View 9 Replies View Related

General :: Samsung SGSL I9003 - How To Completely Uninstall Chainfire 3D Drivers

Jun 15, 2011

before installing and apply nvidia patch my games like plant vs zombie running without problem.

but after unsuccessful attempt of play nvidia games on my deivce Samsung SGSL i9003.

i uninstall this, set plugin to default and uninstall drivers.

But Still my games are no longer running.

I face problem with plant vs zombie. it crash as it start but before chainfire3d it run perfectly.

View 9 Replies View Related

General :: Blank Screen After Chainfire EGL Driver Install (Ascend D Quad U9510)

Jan 21, 2013

Got a U9510, D Quad (unlocked and unbranded outright) (didn't see my phone listed so posting in this section)

Worked great, rooted easily. Installed Chainfire 3D, was all fine. Uninstall as decided I dont need it.

Then stupidly decided to try reinstall and try Beta EGL driver after browsing and finding some EGL level support.

Now the screen is blank, no lights, no boot logo, nothing, and I want to cry. (Though I have not been able to pull the battery)

Plug in via USB still shows up as Android device etc.

I dont know how to pull the battery on this phone, it's not easily accessible, I took the screws out of the back plate and tried to lift up the plate but couldn't see how to do it, so just put the screws back in.

Also it's new, so no SD card yet, internal only.

USB Setting is default to storage device, but internal doesn't show up on that setting, it does on MTP.

What steps to recovery?

Most similar issue I've found is this, but only seems like the same symptoms, not same cause: [URL]....

No mention of EGL, and I had no problems with Chainfire until I tried EGL.

Anyway to uninstall the driver over USB? And how to get the backplate off without damage to pull the battery?

I don't have anything critical on the phone storage I can't replace easily, have flashed roms before etc, but prefer to recover/undo if possible. And again with the storage issue, how would I gain access to the internal storage without the screen on?

edit: The removable disk drive shows up for the SD card (but obviously inaccessible since no microSD in phone), but I'm poor till wednesday night, so cant go out and get a microSD to attempt a fix yet.

HiSuite can't connect to the phone (HiSuite USB mode needs to be turned on OR USB debugging, debugging is) so I presume the phone is not in a fully powered on state running the OS (unable to start graphics driver etc).

edit2: The manual states if I want to change the battery to contact an authorised service provider (!), but can hold the power button for more than 10 seconds to force a restart (but I wonder if that will work in its current state?)

View 1 Replies View Related

General :: How To Unbrick MT6577

Apr 11, 2013

how do I unbrick my MK6577 (Noir A-8) I tried to use SPTool to install CWM but now luck need ROM files to flash it through SPTools.

View 2 Replies View Related

General :: How To Unbrick WM8850

Sep 27, 2012

i'm trying to root my (chinese) tablet (like title). i've used nanospic.ro page_id=12[/url] WM8850 RootBurner v1.1.0.

So i put files into sd and reboot tablet. After the text "root complete" i removed sdcard and my tablet opened. I knew immediately that I could not access the to settings cause the icon was passing and text becomed com.android.settings. when i try to open it, an error message. So i try another time to root device but it won't open itself.. i turn on it and remain on loading gif..

View 3 Replies View Related

General :: How To Unbrick Alcatel OT-906

May 24, 2012

I have an Alcatel OT-906 but I bricked it.

I need to rescue it but I don't find any ROM to this phone or some way to repair it.

Is totally bricked

View 2 Replies View Related

General :: How To Unbrick Padfone 2

Feb 19, 2013

The terminal was mistakenly brick while I introduced changes to the file build.prop. Now the only way to turn on, is flashing the firmware again (putting the original file from fastboot does't work). I wanted to know how to transfer the firmware zip file to internal memory because the device is not recognized as FTP.

View 1 Replies View Related

General :: How To Unbrick Prada 3

Mar 12, 2013

my prada 3 is brick

View 2 Replies View Related

General :: Unbrick Micromax A90s

Jan 23, 2013

Actually I am in a deep trouble, I bought Micromax a90s a month ago , It is really a very good phone. I rooted it and was very happy but 1 day ago I was trying to add new fonts to it & It got bricked I don't have any backup.I have no sources to send it to service centre. how can I repair it myself, Unbrick ?

View 1 Replies View Related

General :: How To Unbrick Galaxy Y S5360

Sep 20, 2012

i was using repencis rom and i tried to flash jelly blast but something went wrong and i bricked my phone i am not able to access my recovery and when i try to flash stock rom via odin it fails i used different firmware packages but i did not succeed now i can only access download mode.

View 9 Replies View Related

General :: Unbrick Via ADB - Recovery Fails

Jan 8, 2013

I believe I have bricked an Alcatel 990 after flashing "cm-7-20121221-UNOFFICIAL-brandy.zip" via CWM.

Here are reasons why I believe it's bricked good and proper ;-P

1/ device boot loops when charging only via usb connection to PC
- 1.1 - device shows android logo - then "Alcatel One Touch Cyanogenmod 7" text/logo
- 1.2 - this loops continuous and never fully boots - output of adb logcat below

2/ when power-up off charge, only "menu", "search" and "back" soft keys illuminate - the screen+backlight stay completely off
- 2.1 - this remains constant until battery pull
- 2.2 - recovery mode via key combos do not work. Period. (no user error - assured!)

3/ when connected via usb during point 2 - there is not feedback from adb logcat - dead as a doorknob
- 3.1 - when boot looping (1.1 above) I get ~2seconds of adb connectivity then device reboots.
- 3.2 - fastboot <options> <commands> does nothing - device stays as "waiting forr device" this is contstant
- 3.3 - adb has better luck - I can invoke adb logcat and this captures log info as below
- 3.4 - adb recovery options fail and device reboots and hangs as on point 2 above
- 3.5 - adb shell shows rooted prompt for 2 seconds when <up/previous command+enter> very quickly repeated keyboard bashing style
- 3.6 - I have invoked "adb shell rm -r /cache/*" and "adb shell recovery --wipe_data - all to no avail in context of unbricking device

Code:
david@1000H:~/Downloads/src/adt-bundle-linux-x86/sdk/platform-tools$ adb logcat
- waiting for device -
--------- beginning of /dev/log/main
I/cm ( 105): Welcome to Android 2.3.7 / CyanogenMod-7-20121221-UNOFFICIAL-brandy
I/cm ( 106): _

[Code] .....

This is replicated on command and is constant. Replicated under slackware/linux and under win7-32bit-ultimate.

Recovery fails to boot so I need some sort of usb 'bridge' to interrupt the boot loop and invoke recovery - or flashall back onto device - but fastboot fails to identify the device/connectivity.

View 4 Replies View Related

General :: Unable To Unbrick Nextway E9x?

Apr 13, 2014

I've hard bricked my e9x tablet, no power black screen nothing, and I'm trying to unbrick. I've reset the NAND but that didn't work either.

View 1 Replies View Related

General :: How To Unbrick Samsung GT-i5500

Apr 7, 2012

I have recently bricked my samsung i5500 by flashing it with wrong software(that's what I think anyway). Phone is not responding at all. The screen is black at all times. I've tried volume down + ok + call end with no effect also UnBrickableMod didn't work. Is there any way to get it to work again?

View 5 Replies View Related

General :: How To Unbrick Asus Memopad HD7

Aug 25, 2013

how to Unbrick the Asus Memopad HD7 ? Or custom recovery or where i can download the Stock Rom ?

View 9 Replies View Related

General :: How To Unbrick Samsung Galaxy S2 HD LTE

May 15, 2012

I update ICS to my samsung Galaxy S2 HD LTE failed maybe cause I'm using an i9100 ICS rom.

when i restart the phone, it goes into an phone icon connected to a PC icon with an exclamation mark icon inbetween.

or I can't turn it into recovery mode by pressing Volume Down + Home + Power (or any other key combos) .

I can't find the device by adb via pc, and kies connect the phone also failed.

I think the phone is bricked when I can't get into download mode.

even if i use a usb plugin, it goes to "Factory mode" with "phone ! PC" icon,but not down load mode.

how can I recove my phone?

View 4 Replies View Related

General :: How To Unbrick Galaxy S Duos

Apr 20, 2014

how to unbrick galaxy s duos ?how to unbrick

View 3 Replies View Related

General :: How To Unbrick HTC Sensation XL With Ubuntu

Aug 30, 2013

Since yesterday I have a big problem. Yesterday I think I deleted my Sensation XL, because now it's dead. The bootloader and the Charge-LED dont work anymore. No sign of life... Now I saw the tutorial how to unbrick a HTC. I downloaded Ubuntu, but if I use the brickdetect of the Sensation it just says: "Device can't be detected". Now my questions: Where can I get the Unbrick-package for the Sensation XL? Can I unbrick my Sensation XL with Ubuntu?

View 4 Replies View Related

General :: How To Unbrick Prestigio PMP7100D3G Tablet

Apr 7, 2013

All information I found (perhaps I lookup with wrong keywords) is about unbricking the phone or other manufacturers tablets but once someone rooted the device and installed a modified rom but then playing with fastboot or some download managers, etc.

1. I wanted to revert back to 4.1 JB soft for my tablet as I found the most recent update messing up with 3G connectivity despite the fact the manufacturer prepared the update to improve 3G... anyway

2. I run the RKBatchTool 1.5 the device was connected properly as I did before when upgrading from ICS to 4.1 JB.

3. Unfortunately, just before the end of downgrading something went wrong (please see the below log) and now booting up the device fails. At first it displayed some linux script about trying to recover, then prestigio screen appeared just to show in a second a dead android robot with an exclamation mark.

14:57:28 504Rockchip Batch Tool v1.5.3.0 start run
15:02:16 091Rockchip Batch Tool v1.5.3.0 start run
15:05:33 769Rockchip Batch Tool v1.5.3.0 start run
15:58:23 292**********Upgrade Start Total<1>**********
15:58:23 307<Layer 5-3> Test Device Start
[code]....

4. I tried a combination of volume up and power button but still no luck.

How can I bring the live back to the device that was not rooted. I have an external SD card. I loaded an original image from prestigio but I guess I need something else done so it actually boots from the SD and recovers the ROM to the internal memory.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved