I've been scouring the internet for the last view months since initially attempted to root my admittedly out of date htc view. A friend gave it to me in exchange for an old comp I built. I attempted through revolutionary to root, went through HTC and unlocked my device, continued to try and root it but found no proper software that worked to do so. Even tried something called mulitool which was pretty cool, but didn't get the job done. After a time I gave up on rooting, and my tablet powered down and I found myself stuck at the recovery screen. None of the options for clear storage, factory reset, or anything else proved fruitful. I removed my sd and was able to boot up fine. This was months ago. Now I'm having a similar problem only now even without SD card it's in a boot cycle where it boots to recovery for 30 seconds or so and shuts down, then back to recovery and like this ad infintum.
my screen reads:
express pvt ship s on rl
hdboot 1.14 0005
I have an Allwinner A10 clone (Kurio 7), it is designed for kids but otherwise a standard android tablet. After hours of googling I rooted and installed CWM & Gapps (not included in the stock ROM). So far so good. The stock ROM was causing issues with some apps, it needed to go.
I flashed CM10 and it worked but no touch screen. It needed a compatibility flash to make it work. You can guess what's coming. I picked the wrong one and now the device does the following:
Reboot loop Black screen (backlight though) PWR+Vol up no longer gets to recovery Vibrates constantly between reboots (due to wrong patch I'm guessing)
ADB picks up the device for a split second between reboots but "adb reboot recovery" does nothing. Even when using wait command. Tried "fastboot flash recovery cwm.img" after wait command, no luck. Is there anything else I can try?
I SOFT BRICKED my lg e730 while trying to install HarshGinger v3.
I tried to root my phone, and everything was ok until I tried to install the rom. I saw in recovery how the rom was installing, and when all was completed the phone entered into a boot loop. I think that I should install first a stable cyanogen mod and then harshginger.. I think this is what I done wrong. The phone it`s soft bricked because I can reach to the emergency mode screen.
Question: I can do a reboot from ADB or I have to use KDZ? KDZ looks like the type of program used by the smart people and I`m not really that smart. I am looking for a simpler solution, like a combination of buttons or something.
i installed flyrom v4 in ma htc explorer through clockworkmod... When i tried to reboot it stucks in the htc splash screen..Still not coming to home screen. And i partitioned ma sd card ext2 using minitool and i linked it thru link2sd... But it doesnt mount in clockworkmod... But flyrom instaled perfectly...
last week i decided to install cyanogenmod on my phone.Im using international version of Galaxy Note GTN7000.
I saw there was a windows installer on cm website..but wanted to make a backup of my current rom.. i rooted my phone using kingo android root..installed rom manager..flashed latest clockworkmod recovery.. but on booting into recovery,i found stock recovery was being forced..i read somewhere it was because of unlocked bootloader..
on cyanogenmod wiki page,i found installation of clockworkmod recov using heimdall..everything went fine ...blue progress bar was shown in the download mode...and when i rebooted into recovery mode i saw the first danger sign..there was a yellow triangle beneath galaxy note logo..
and then it booted into clockworkmod recovery 5.8..Foolishly i did a system backup..rebooted...surprised to find phone went into black screen after displaying a note logo with yellow triangle beneath..tried recovery from clockworkmod without hope but that didnt work as expected...
All i need now is to install cyanogenmod 10.1.3 stable on my device..i dont want a custom rom backup anymore..'
My Android phone is soft bricked it is an VS870 LG 4G Lite Lucid II.
This is the second time my phone becomes bricked due to my last incident with my samsung. It has nothing to do with it being rooted, but uninstalled some apps in the phone which I thought had nothing to do with the system. IDK last one I uninstalled was zappos. I know how to un-brick my phone, but my only problem is getting the phone to be recognized by my computer. I tried uninstalling and re-installing the drivers, removing the battery from the phone, using different USB ports still no luck . Could it be that the battery percentage went below 75%? if so I have no way else to charge, it does not seem to charge anymore?
Recently I have rooted my android tablet and I was exploring what I could do. One guy was telling me about an app that can work with performance in game(ChainFire 3D). He said it lowers the pixels in the game to run better. I tapped the install button and it said rebooting now. It then started to reboot but then proceeded to get stuck at the boot screen. I tried doing a hard reset but it is still stuck. I have also tried flashing the stock rom, but I get installation aborted when I try and install it.
I recently just rooted my evo 3d sprint with the the boot 1.5 and everything went well. I decided i wanted to overclock my phone so i followed zeemaxs way. Before going into the overclock procedure i decided to do the the RCMIX Evo 3d kernel v. 2.2.3 first so i would have better results when done with the overclock procedure.I boot-up the kernel through the recovery mode on the phone butit failed to load so i just rebooted. After that my wifi and 4g stopped working. So i downloaded an app on the market called "flash image GUI" which lets me flash the kernels through the app. I flashed the RCMIX kernel and rebooted and now im stuck ima boot loop. I COULD just go back and back up to my old rom and settings etc but the problem is i dintmake any kind of back up or recovery i think.
I was running Team Jellybeans V5 No Problem for the last little while (on my T959d)Everything worked great (minus a few glitches here and there of course)Saw the update for V6, downloaded, and flashed with CWM.
Did the wipes, (cache, dalvik and factory) did the wipes again after reboot,Now Im stuck in an infinite bootloop, (goes to samsung splash, then Devilkernel Splash, then CWM where it shows cannot mount e:/ (cycles too quick I can't see it..) then it just reboots and continues, I can't boot the phone into CWM recovery, can't boot into download mode, tried USB JIG, doesnt do anything,I can't adb my phone, can't ODIN..
Tablet hangs in Bootloop after installed cm9_nightly_20120721 + protab2xxl_compatibility_1.2.0 startet from cwm 220.127.116.11. Noticed that the "/data" partition only has 15MB of Space with 0B Byte free. I wiped the cache after installation with cwm, i am not able to boot to cwm again because key combinations not work on this device.
Got a T15A Generic tablet which has the same Hardware than protab 2 xxl, Goclever A103, Coby 1042 etc..how to get CM9 or CM10 running?
I spoofed my device S6312 to galaxy nexus using network spoofer to download an incompatible game from google play store.According to network spoofer everything worked great but nothing actually happened and that game was still incompatible on play store.So I launched network spoofer and told it to recover my device again to S6102.It said that the device will reboot so I gave it permissions and my device started rebooting but it stop at the Samsung logo and was doing the same thing again and again so s actually boot looping. How to recover my device and any way to do it without a computer.
My galaxy s3 is rooted and cwm installed.I have changed a default dpi and rebooted to find my self in constant boot loop.I'm at the brink of flashing my rom to a custom one to see if it works but very scared to do so especially not knowing much about it.I have performed hard reset by going into recovery mode but it didn't work.
I have probably bricked my Huawei Vision by rewriting boot image.
However, I can connect* it to PC and it sees my phone as "Huawei Handset" (same with Windows and Linux). But Windows misses its drivers (non-bricked phone worked); Linux seems to work. No OS can connect to it using default (downloaded) ADB, nor Fastboot, nor SoftwareUpdateTool.
Its PCI ID is 12d1:c002.
How could I reflash it? I would prefer the ways without disassembling the phone.
How to boot the phone, so you can connect it to PC:
1. turn off my phone completely (vol up + power for 10 seconds - release power for a seconds and repeat it once again)
2. prepare USB cable, so you can connect it in few seconds
3. hold vol down + power and after ~1s, connect USB cable (still hold vol down)
4. when Huawei logo appears, release both buttons - your phone is connected now
I have an Android tablet (Diablotek D2-721, very cheap I know, but it serves its purpose) that is stuck in a boot loop. The real problem here is that this device apparently does not have any sort of recovery mode and being in a boot loop means it does not get recognized by ADB or any firmware flashing software.
I researched all day yesterday perusing forum after forum but almost every single solution requires booting into recovery.
I had been flashing roms with 4ext recovery since you can just use smartflash but after the last time I flashed a rom the rom wouldn't load and just kept rebooting the phone the the htc screen over and over again
i m using sony ericsson xperia arc s i have rooted my phone few days ago everything was ok i have root through flashtool method and i think 587 kenel was used. i dont know about roms kernel n etc etc i have read the thread and root my phone last night i tried to install font changer i granted superuser request and phone is restarting and then stuck on bootloop first it shows sony screen and then xperia screen and again restart and this process go on what should i do
I have a bricked Samsung Galaxy S2 and have been doing some research on how to fix this. There is a lot of info online, but I don't understand most of it as it is too technical and I need having it translated into layman's terms!
- Galaxy S2 (GT-I9100) - Unlocked - Purchased from Kogan 2 years ago (no longer under warranty) - Appears to be Polish stock based on the packaging and manual - I am in Australia
- Phone is stuck in boot loop, unable to get past the intro flash screen that says Samsung Galaxy S2 GT-I19100.
- It keeps resetting itself and going back to flash screen infinitely. I need to remove the battery in order for it to stop doing that.
- I'm unable to get into the mode that would allow me to do a factory reset, however I am able to get into download mode.
What I think I need to do, but need verifying:
- Download Odin onto my PC. (I think Odin is software that allows me to access the core of the phone via my PC, is this correct?)
- Download the correct version of the operating system. From what I can gather, there are different versions depending upon which network you are with. Because my phone is unlocked, I need to get an unlocked version but I'm not sure whether I should get one designed for Australia or for Poland (or whether it matters)?
- Connect PC and phone via USB cable
- Turn on Odin
- Somehow use Odin to reinstall O/S on my phone
- Are the steps above correct or am I missing something?
- Does it matter which version of Odin I install or can I just do a google search for Odin downloads?
- Where do I find the file I need to reinstall the O/S?
- Where can I find instructions on how to use Odin once I have the correct file to install?
i had a custom rom gingerbread and then i wanted to do a factory reset to go back to the stock room , instead this give me big problems. it is stuck on the lg screen and i try to go into recovery and alit says is do not pull out battery Formatting data , Formatting cache and Factory reset and this it goes right back into the lg screen where it gets stuck . My computer recongizes my phone but i dont know how to use adb commands thing like a pro . i have everything i need in the folder "backup" in the clockwordmod folder .
I installed the stock firmware on my Galaxy Pocket(i.e., XXLF5 Version). Then this morning i downloaded the MakDroid ROM. and installed it through CWM recovery. But after that my phone just keep restarting to the SAMSUNG Logo and freezes there after vibrating several times..