General :: HTC Sensation ICS Best Rom For Saving Power?
Feb 6, 2012
I am trying to find the best ICS rom for the HTC sensation when it comes to the battery life. I understand the roms on here are works in progress, I would just like to find a good rom that isn't too hard on the battery life.
my htc sensation shut down yesterday, and as yet I have been unable to get it on, the battery itself was still sitting at about 15%. When I plug the phone into the wall or computer the orange led flashes slowly. When I attempt to turn the phone on it vibrates repeatedly as if trying to boot, but nothing appears on the screen. I have tried to jump start the phone, hard reboot, bootload through the pc but nothing seems to be happening. I need my phone urgently as my wife is due to give birth anyday now, and she needs to be able to contact me at work.
i'm trying to optimise the battery comsumtion on my galaxy s2.From the battery panel i can see my phone is regularly woken up from power saving standby.Is there any way to identify what apps are responsible for waking up the phone?
Is it possible to reboot an Android smartphone as a non-smartphone(Like a Nokia 1100) ? Just enable only services to make phone calls and everything else remain disabled(Slow down the CPU to the lowest clock speeds, lower bit depth, turn off all on-board electronics other than those necessary etc). Motivation is to save power. In my phone most of the power is consumed by Android OS (and not screen). I was wondering if I had a mode like that I could keep the phone alive in case I can't charge the phone immediately, by switching into this power saving mode.
i was wondering about the hydra kernals. I installed the latest overvolt hydra kernal. My question is when you go into idle, does it underclock for you? Or do you have to install undervolt to do that? Also can you install both overvolt and undervolt at the same time? (not literally at the same time but have both kernals at once to get the most power and battery saving?)
Android has provided Power management framework for saving batterlife. But this is limited to screen/key lights. I am exploring ways to enhance this scheme for other use cases like camera, media playback by changing CPU frequency. I would like to know what support is available for this from Android kernel.
What is the difference between "automatic brightness adjustment" and "power saving mode" which has the description "save power by adjusting image and adjusting LCD brightness"? Which one should I have on to conserve battery? It sounds like the do the same thing.
I have a rooted Galaxy S3 with Android 4.1.2, and for some strange reason they've changed the screenshot combination away from the Power+VolDown that other Androids use to Power+Home which can't realistically be pressed one-handed. How can I change it back to Power+VolDown?
my phone is karbon A9+ and i wiped the cash,system and data and after that flashed a Custom ROM ! but now the phone just power on in download mode!! how to power on, for recovery or normal power on ! the phone just have the black screen with "Entry QPTS Downloading" Text..i will back to India 5 month later ! can it be fixed or i have to wait for 5 month to come back and send it to service !
I had cm 10.1, 4.1.2 and is worked ok, but from yestardy i instaled cm 10.1, 4.2.2 and have problem with my htc senstion, its turning off alone when is in my pocket, or on table for 1,2 minutes, also the battery from 100 percent to 20 for 2-3 hours on standby. i thought its because of rom, but i m last night instaled dark sense 1.6.3, and problem is the same, its alone turning off.
I have an HTC Sensation XE that has been working fine until I upgraded it to 4.0.3 Since then it mounts the miniSD card as Read Only and many of my programs do not work and I get the response to that no SDcard is inserted.I have also los connection to my Microsoft Exchange, thus not being able to receive any emails on my phone. how I could downgrade to a version previous than 4.0.3
yesterday i was walking to my gym, and a few minutes in it started downpouring. after i got back my phone's background light was flickering like a flourescent light in an old abandoned building. i tried restarting it a few times and eventually like 10 minutes after my last restart finished the light's complexion faded and made everything on my phone look pail. i dont know if this was because of the restart or not. anyway, i turned my phone off last night right before i went to bed, and when i woke up it won't turn on, and if i plug it into the charger, the orange LED light doesn't come up. it blinks occasionally when plugged in, but very slowly, alot slower than it's normal blinking.
I got a HTC sensation xl which has been rooted.When trying to install JB rom via recovery, it did not succeed and I accidentally format/ system in recovery.Now I am stuck in HTC logo white screen whenever I turn on my device. My Recovery CWM is still accessible.But I got a problem with my sd card which cannot mount and it show error sd card in the recovery. It doesn't pop up in "My Computer" as well.
I have a Sensation 4g, I was running ARHD version 3, on 2.3.4 android, I installed that around febraury.
Now I wanted to install the latest Android Revolution HD 6.7.0, I did everything as the list suggested I update the firmware( PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.1100). But when I install the rom everything goes as normal except that when I reboot in never boots into the rom, I have leave it over 20 mins, and nothing happens, I have tried several times, and I tried to restore back to version 3, everything seems "Restored" except it won't pass from htc logo again (I think it's because I have an updated firmware)
So, how do I manage to install the lasted arhd , or how do I do to downgrade the firmware in order to have it working again, I would prefer to have ICS, but I can't manage to do it, my phone is unusable now.
I bought a new screen for my HTC Sensation and now I can't drag. I can still tap stuff, but it's not as responsive. I downloaded several touchscreen testing apps and it seems like when I press the screen for more than 1 second, the digitizer can no longer detect my touch. So if I try to drag something, it works for 1 second, then the screen can't detect my finger anymore.
Is this a problem with the new digitizer or is this a software issue? I'm using ViperS 1.4.1.
I got my new HTC Sensation with Android some days ago and I would like to change several things on it, but before doing it and to be safe safe I would like to do a backup of the phone as I got it, as I did with my old (and broken ) HTC P3600 with WM.
I have been searching forums (including this one) and I find tools and tutorials for doing it in Windows Mobile or for Applications, but I didn't find it (or I was not able to find it) for the full smartphone, including the ROM Android-based.
I've been following the instructions on the HTCdev website for unlocking the bootloader on my HTC sensation XE. Ive made it to the last step and acquired the unlock code from HTC. I then copied that to my computer and followed the last step "fastboot flash unlocktoken Unlock_code.bin" but I get an error message in the CMD promt "remote: unlock token check failed"
I have made sure that the .bin file is in the correct directory (c:Android).I have USB debugging enabled and fastboot disabled.
I wanted to ask if a HTC evo 3d battery would work on a HTC sensation? I ordered a battery from Amazon and it says evo 3d on the battery but in the subject it says htc sensation to. They both are 3.7v too. URL....
My brother root his HTC Sensation, install CWM Recovery, and load CM10 nightly build.
When we tried letting the initial boot run its course, the device got caught in a boot loop. And today I only made matters worse, I had my brother wipe the whole thing to where the phone won't even mount as a USB device, it just tries to install drivers and fails when you connect it. However, while in recovery, fast boot commands work. Anyways, I'm trying to figure out how to restore the phone to stock and I just can't get it to work.
How to flash the ICS rom for the phone, and how to mount it as a drive (It currently is wiped with no OS.)
I would like to port a ROM, but the resolution of the device is too large for my HDPI (480x800) phone (HTC Glacier). The resolution of the ROM I want to port is qHD (540x960) and is the HTC Sensation. I want to port is OrDroid. Is it just /system/framework, or both /system/framework and /system/app? I can easily port it, I just need it resized.
I bought a HTC Sensation Z710a from Ebay and I didn't realize that it didn't have the "normal" Android on it. I've had it for a while now, over a year and I only recently revisited the subject of my OS when I realized I hadn't been asked to update anything like my previous phone (Nexus from Vodafone). I looked into it a little and it appears I have Android 4.0.3 but "Android Revolution HD 6.6.0 XE" by mike1986?
I would like to know what the best thing to do here is, as I would like to update to the newest available Android out for my phone, and I think I would prefer the "normal" Android to the mike1986 development version (but whatever works I suppose).
Also, my battery seems to be dying a lot faster these days. Will getting a new one fix the problem entirely, and will updating the OS aid in this at all?
Since yesterday I have a big problem. Yesterday I think I deleted my Sensation XL, because now it's dead. The bootloader and the Charge-LED dont work anymore. No sign of life... Now I saw the tutorial how to unbrick a HTC. I downloaded Ubuntu, but if I use the brickdetect of the Sensation it just says: "Device can't be detected". Now my questions: Where can I get the Unbrick-package for the Sensation XL? Can I unbrick my Sensation XL with Ubuntu?