I have problem in note 2 7100. When i turn on it stuck in flash screen. I try to instal new kernel but this message appear. There is no PIT partition. And when I try to instal pit file this message appear and stuck get pit for mapping. I check cable and another port but the problem still there.
Just like the title says, I'm at the laundrymat on my phone so I didn't have the option to search the forums. I wiped the data, and did a back up. But I would like to use chevys kernel vs a p3, just my preference.
I've been using a galaxy Y S5360 for almost 18 months and I have been using custom ROMs for around 15 months. First I tried Creed 3.5 and loved it. A few months moved to Jellyblast 3 which was again fine. Two days ago I tried installing Hyperion and my phone got bricked I managed to flash stock ROM using odin . But now my phone gets bricked everytime I try installing a custom ROM ( tried Creed 3.5, Jellyblast 3 and Hyperion 8) and Im stuck with the stock ROM .
I just went through the process of compiling a custom ROM and they used a stock kernel. I would like to incorporate a different kernel when I compile and instead of the stock. I know I could compile them separately and have them flash together but I want one zip to flash. Just would like to go through the process to learn.
I'm trying to make a custom kernel for the Samsung Gravity SMART using sources from the unofficial CM9 port for the Gio/Ace (which both use very similar hardware to the Gravity Smart). What I've succeeded at so far:
1) Acquiring the source, both for the CM9 kernel and for the stock Froyo kernel 2) Searching for the device-dependent references in the stock kernel 3) Porting those changes over to the CM9 kernel 4) Getting everything to actually compile 5) Acquiring the stock CM7.2 source 6) Creating device makefiles (i.e. BoardConfig.mk, etc) 7) Building CM7.2 using kernel built in step #4 8) Putting the various img files into an Odin-compatible .tar.md5 9) Actually flashing to the phone.
And for all that work, I got.. a soft-bricked phone (fortunately, I have an Odin file for stock firmware). The phone boots to a SAMSUNG logo (not flashing/throbbing). how the heck do I figure out what's actually failing? Is there a bootloader to unlock, and if so how do I unlock it?
So I've been looking into flashing custom kernels, and I can't seem to find an answer to this question. Basically, I'm wondering if the kernel remains after installing a new nightly, or do I have to reflash the kernel every time the ROM updates?
Last week, I played around with getting a custom recovery built for INQ Cloud Touch..
After compiling - flashing recompiling re-flashing for almost a week and on the verge of giving up ...
I realized, searched and found flash_image ... come to find out custom compile of recovery was fine, fastboot did not like my device and wasn't flashing it properly.
So flash_image got the custom recovery working as suppose to, able to backup/restore ... Flash roms.. however there are no roms.. best i could do was try roms from devices close to this one, with no luck!
So i decided i would try my hand at making a 2.3.7 gingerbread rom. Of course stock is froyo 2.2.1 and before i can make the rom.. i need a kernel for gingerbread. So I got the cm-kernel source using this guide:
[EDIT] pulled my .config file using both /proc/config.tgz and the included script to pull it from the boot.img [/EDIT]
Now, i been trying to get kernel compiled for the last 5 days.. and like i said, no lack of searching and reading... Had first error, forgot what it was now, but i got it fixed and compile went on.
Code: LD .tmp_vmlinux1 arm-eabi-ld: no machine record defined arm-eabi-ld: no machine record defined arch/arm/mach-msm/built-in.o: In function `parse_tag_msm_partition':
I have a notepad full of things i have enabled/disabled and restored to original trying to find what is missing or shouldn't be there!
I'm new to both xda and android rooting. I just want to know what's the different between Kernel and ROM? Do you need to flash to the latest Kernel to increase stability while running a certain custom ROM? I'm just a bit confused between these two and what their function
I have an xperia X8 with some naa kernel and xperiadroidx 6.1.The thing is that with this custom kernel and ROM when i put a SIM from another network carrier, the question asking for the SIM-unlock code input is not showing up. (this appeared before when phone was in stock state).Is it possible to do it without re-flashing to stock?
...or i have to put back the phone to stock? What is the easiest/safest/best way to do this? using the restore option in "PC companion" SE app? Is it only needed to put the stock kernel and ROM, or Do i also need to re-lock the bootloader?
I don't need the whole explanation, just a little guidance, just a few tips to know what to do, then i can google/search myself for the specifics on how to actually do it.
I have samsung galaxy pocket duos gt s5302..I have rooted it and flashed CWM recovery then I tried to flash custom compact kernel made by Deadly. After I flashed through CWM my phone got hard bricked It wont turn on What should I do?
So my Galaxy s3 all of a sudden started to have stutters, i have a custom rom Foxhound 2.3, and when i try any custom kernel it lags as hell. (Stock also gives stutters so its not kernel related i think)
For example perseus stutters my phone in app drawer and every time i open an application.
Syah 1.8.9. although its better, still have some stutters...
the only one that can have the phone more stable is the stock one. I dont really mind having the stock kernel its just that it makes the phone more stable but it still stutters when opening apps and in the app drawer.
Its weird because in applications i have no problems, and when im playing games is all good to.. even the more heavy intensive ones. Also my boot and shutdown animation stutter or jitters a little bit.. a thing that dint happened.
Also the benchmarks are good as always +/- 16000 on antutu, no changes... so i don't really understand whats happening...
Steps so far:
-Tested other custom roms including CM10.1 Nightly -Tested various kernel. -Flashed stock rom with odin
I flash makdroid v2 then after some days i also flash vm00 v29 kernel,and everything was working fine,so yesterday i switch off my phone and when i try putting it on,i get kernel panic upload mode,and i cant boot to the OS and recovery.i can ony go to download mode,so i tried to flash stock rom with odin but, odin does not detect my phone.
Unable to find my stock firmware.. every link points to the same file from hotfile.com and my ISP provider sucks causing the download to get stuck in between, tried two times at 100Kbps, failed both the times, once at 62%(552 MB)! its very hard to download it, any non hotfile link or some direct link if possible, can download it and host it as a torrent or something because i have very bad net connection and its slow also.
I am talking about Samsung Galaxy s3 19300 International/India Jelly Bean ROM, or even ICS stock might be ok. _
right now i have the stock ROM and Siyah Kernel and i want to clean instal everything and remove root.
I have a Xperia Arc S and I really wanted to install this ROM (URL.... ). But I don't know how to install custom rom. My phone is rooted I guess. I root my phone with Eroot (link -URL....). After that I installed root checker pro and it said your phone has been rooted successfully. Then I installed X-Parts to install CWM, but I failed to open the recovery mode. Yes I already tried pressing few times that volume down or back button. My android version 4.0.4 (4.1.B.0.587).
I try to make a custom rom for my device with dsixda kitchen, but when I try to install my own rom on my device via CWM, I get this message: Error in /sdcard/(name of my rom).zip (status 0) installation aborted.
This is what I did: I just extracted the stock kernel (boot.img) and the system folder from my device, then I cooked the rom with dsixda kitchen and I finally converted the script from update to updater