General :: GS2 - Screen Goes Black / Auto Reboot Does Not Trigger?
Mar 28, 2013
It is two days now that my GS2 (stock 4.1.2, PhilZ latest kernel + some bloatware removal and little ROM integrations, like androidlost: nothing recent, anyway) after being turned off all night long, boots up to the home: it responds for half a minute than freezes for a minute or two; then soft-reboots and then go all ok.If I turn it off and on, I have no problems: this only happens at first boot in the morning.
I'm not sure, but it also seems that if I let it boot the first time without touching anything, after the screen goes black the autoreboot does not trigger.
I have an Allwinner A10 clone (Kurio 7), it is designed for kids but otherwise a standard android tablet. After hours of googling I rooted and installed CWM & Gapps (not included in the stock ROM). So far so good. The stock ROM was causing issues with some apps, it needed to go.
I flashed CM10 and it worked but no touch screen. It needed a compatibility flash to make it work. You can guess what's coming. I picked the wrong one and now the device does the following:
Reboot loop Black screen (backlight though) PWR+Vol up no longer gets to recovery Vibrates constantly between reboots (due to wrong patch I'm guessing)
ADB picks up the device for a split second between reboots but "adb reboot recovery" does nothing. Even when using wait command. Tried "fastboot flash recovery cwm.img" after wait command, no luck. Is there anything else I can try?
Just got my Droid X. Is there an alternated camera app that has an on screen shutter trigger? I don't like using the dedicated camera button because my case is sort of thick and the button is so small, its hard to get it to snap the shot, I'd rather tap the screen like other android phones.
My HTC One X Plus fell down recently, and has got a ' triangle flag' like mark on the top left part of the screen. (But not on the Gorilla Screen). But each day, when I see it, the black mark getting disappeared , as forming lines in the triangle flag (the original screen getting viewed through the lines).
When I try the phone screenshot option, the complete screen is captured with no black mark on it.
When I contacted the service center, they asked me to replace the screen. That is very costly
Is it really needed to replace the screen or will it get disappeared eventually?
I am running cm7.03 with lordmodue6.7 on my htc inspire 4g. I just went to look at a video on youtube and noticed that their was no visual just audio. I uninstalled it then installed, but no luck. Afterwards i decided to check all other apps that play video like vevo and same problem. I uninstalled adobe flash player then installed it, but ALSO NO LUCK =[. I then checked youtune on my browser and same problem..
I Have a galaxy note 2 n7102 (Clone).I have rooted it 2 days ago.i have the android stock boot animation but when i added a custom boot animation, when i rebooted the screen goes black and then the phone starts up
I tried to put it in system/media and data/local and change boot animation and Samsung in system/bin and reboot but nothing happens.
My Galaxy S4 screen is just completely black. I can turn on my phone and even put in my pattern code on the screen, but it remains black. I have tried to reset it multiple times and I don't really know what to do. Any possible fix without having to get a repair.
I have an HTC Droid Incredible LTE 4 and for the most part it's fabulous...
But when I'm talking on the phone the screen goes black and if I try to unlock it to schedule something in my calendar, etc., the screen just goes black over and over and won't stay active long enough for me to unlock the screen. This is exceedingly frustrating since I can't use any apps when I'm on the phone, and I have to push the button on the top to get the screen to light up at all if I'm on the phone, it doesn't automatically light up if I take it away from my ear to look at something on my phone.
My Tablet shows black screen after a while animation android logo and no more work. So I tried factory reset. But factory reset doesn't proceed to recover menu. It shows only factory reset logo (Android logo with red triangle) like screenshot.
My tab has only 3 button (power, Volume up and down). I tried both of them. But the logo doesn't move. How to factory reset?
I'm trying to build CWM for the HP Slate 7 Plus, but both touch and non-touch builds coming from the CWM Builder and manually built builds give a black screen with a few white lines when booted into recovery. The stock recovery.img I provided to the builder is valid because people were able to reflash the same recovery.img via Flashify with no issues, which is the same method used to flash the defunct CWM. I don't have the Slate 7 Plus, so I can't test things myself
The best I can do right now is debloat, deodex, and pre-root ROMs, as well as install more system apps.
! i was trying to install a new custom ROM ( C.A.M.P ) i had Cyanogenmod 10... i came to where i flash the new rom on my computer then when i wanted to fastboot reboot to install zip on phone, my computer shuts off, now when i turn my phone on it lights up black and stays like this and i cant do anything(no CWM no nothing) so i remove battery to turn off....
I was following this guide to upgrade my Sanei n10: [URL] In recovery mode I have installed the rom.zip, but after I pressed the wrong button and it turned off. Now, when I turn it on, leave the writing sanei and after few second remains on black screen.
If I try to entry in recovery mode with the vol+ button, it remains with the Android robot lying down with a red tiangolo, with no options.
I flashed a rom then i went to flash gapps the bar was loading then it went off the screen and it didn't do anything.i waited about 5 mins and still nothing.i hit the power button and it shut off i go to turn it on and all there is a blue light where notifications show.black screen nothing else...
I have an issue with the chrome browser starting with a completely black screen. At first I thought it was only my last phone (RAZR HD), but the problem is also present on my Verizon Note 3. If it were just an issue on a single phone, I'd probably ask in specific phone forums, but it's happened on two different phones now.
I'm presuming that the problem might be caused by an app I'm using, but the problem is intermittent so I can't tell if the issue subsides when I uninstall certain apps.
I am trying to open fastboot screen in my arnova 7g3 tablet i pressed reset button and also pressed power button simultaneously but its showing black screen what should i do my tablet is rooted by superuser
1) How can I make my phone not turning on the screen when it is locked and i get an sms (via the built it messages app), but light the led light with a custom color (and of course, play a tone). I've tried "LightFlow" but it didn't work, the screen has still gone on when I got an sms.Mention that with 3rd party apps (e.g. whatsapp and wunderlist) the thing works great, the screen is black, the led is on, and the air molecules near the speaker start oscillating harmonically.
2) I know that even without any sdk manipulation, my phone still lets me move some downloaded apps to the sd. I had downloaded a 1.5 GB game and kept in mind that I use 3.5 GB of my internal storage. Luckily enough, this game is movable. I moved it to the sd card, and after the process had been done, I checked how much storage I use on my internal storage - 3.5 GB.The button changed to "Move to device storage" but it seemed that the game had not transfered at all.Mention that I tried the "adb shell pm setinstalllocation 2" thing, and it didn't fix it, so I reversed the process with the "adb shell pm setinstalllocation 0" command.
Anytime i am done using my phone it stays on unless i black it out by hitting the power button. shouldn't it do this automatically? If i get a text in the middle of the night it stays lit up killing my battery, how do i stop this?
I dropped my phone for the first time ever today, and there are cracks under the screen, and no picture whatsoever. Sounds and buttons still work, and I can turn the phone on and off, but the display remains utterly blank. I've pretty much written the phone off, there's probably nothing I can do for it. However, I would love to recover my pictures, contacts, and music from the phone. Is there any way I can do this without being able to see the phone display?
Today when I'm was coming out of gym my phone just fell to the floor. The battery disassembled but it seemed not a big problem.
When I tried to switch it on, the screen became black, but i noticed that the screen turns on because it is not complete black, i noticed a bit of light change. And the most amazing is that I can ear the sound of the music of boot, and the tactile buttons are also with light.
Maybe I can't solve it at home because i would need to dissasemble it but I look for my guarantee and that's in time, the problem is that the phone is rooted, and with rom enhance 236, and this broke my guarantee, can install stock rom just using usb cable?
Recently my phone feel so slugish and the mp3's are not playing on any music app. Ive searched through the internet that if i do a hard reset and clean dalvik cache that should fix it. But when i done that something went wrong with my android phone. It boots with no problem but when the boot finishes the screen just go black. I know it is booted cause it vibrates when i press the buttons(haptic feedback) but its just black screen. Im using mt6516 android platform phone. Cherry Mobile Candy to be exact.
I recently bought a Chinese Mediatek 'pbablet' phone/tablet combination; running Android 4.2.2 Model: MTK6572. Due to it being cheap, it was ideal so I thought, for flashing and development, however I maybe wrong.
However I cannot get it into recovery mode. It won't display the menu when holding down volume + and the power button when powering on.
When pressing these two buttons together on start-up, it actually remains a black screen, and it won't turn on after doing this, and I have to keep pressing the tiny reset button on the side of this device every time I attempt to enter recovery, to get it to turn on as normal again.
Pressing and holding volume - and power at the same time on start-up brings up "Factory mode" (in Chinese) and has no options available for flashing/ROM/ functions, except 'testing' the devices' hardware. This phone doesn't have any other physical buttons except power, volume + and -
I am able to successfully enter CWR by flashing it with MTKDroidTools and rebooting into the recovery mode (while powered up and in the android OS) however I still cannot get into CWR or any recovery mode at all while powering up with power and volume +
I just want to be able to enter a recovery mode on this device, to ensure no future issues and doubts upon the unfortunate events of a permanent brick. My idea is to flash this phablet with ParanoidAndroid; or cyanogenmod, and I could try doing this with a software reset, but then what if the ROM is incompatible, and totally bricks it? Then I have no way in hell to revive and reflash, because I can't access the recovery mode anyway.
I have came to the conclusion that it maybe due to the filesystem, potentially due to it's fbifs, that is the cause to no recovery mode, but what if it's ext4, does any of this make a difference.
Is there any way to make this device open the recovery menu while powering it on?
When I attempt to enter recovery mode while powering up with volume +, the device is basically a brick, until I press reset. It doesn't respond at all. The only way to enter recovery menu is by booting into android resetting the device into recovery mode via an app.
Device Info - Hardware : MT6572 Model : MT6572 Build number : ALPS.JB3.MP.V2.0 Build date UTC : 20131104-123514 Android v : 4.2.2 Baseband v: MOLY.WR8.W1315.MD.WG.MP.V1, 2013/09/18 03:24 Kernel v : 3.4.5 (breaze@urbetter-Linux6) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #10 SMP Thu Dec 19 09:40:47 CST 2013 Uboot build v : ----- LCD Driver IC : 1-hsd070idw1
I installed custom ROM on my Lenovo S890 phone, which works great and has all I need. But there is this problem (similar like in this post [URL] .....). When I try wake up the phone from standby mode, all I see is a dark screen with vertical stripes of several colors all over it. I can however set volume and even the display responses after pushing buttons it vibrates. So it works, but the screen is broken.
When I install original ROM, everything works fine. But when I install any of these custom ROMs found on [URL] .... I have the same issue with the screen.
I'm currently trying to fix this problem with software jBART v0.7.9 - I decompiled the original ROM that works fine and also decompiled the custom ROM I want to fix. Then I'm trying to copy files from original to custom ROM, hoping somehow I overwrite possibly broken files and everything should work afterwards.
i tried flashing and rooting using this thread: URL....but all went wrong when i flashed the kernel using flash mode. Im using a sony ericsson live with walkman. Using falshtool 0.9.11.0 all was fined. it displayed flashing done.
then i followed the steps then tried to root it. but couldn't as it in the command prompt it kept waiting for my device and sometimes displayed daemon tools load successfully. my phone screen remained black and was not responding.when i connect it to my pc it seemed it is not recognized but makes the sound when something is connected to the pc. i am unable to use my phone.i think there is the problem with the adb.i just dont get it well. i cant updat the sm bus driver..when i try to reflash it and re plug via cable it display:
12/043/2013 13:43:18 - INFO - <- This level is successfully initialized 12/043/2013 13:43:18 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00 12/043/2013 13:43:19 - INFO - Device disconnected 12/044/2013 13:44:06 - INFO - Device connected with USB debugging off 12/044/2013 13:44:06 - INFO - For 2011 devices line, be sure you are not in MTP mode