Here's a question that comes from an unclear view of how things work : can a a phone be data roaming without being voice roaming? If so how can a begin data roaming event can be detected? This question came to me from the DDMS options , where one can have" data roaming " and "home voice".
I use my phone daily in a non-Verizon network, so having Data Roaming enabled is very important for me. The new ROM I installed, however, does not have a menu option for enabling/disabling Data Roaming.
Any way to do this through script? Or maybe there is something that can be changed in "build.prop" (or another file) that would change the default setting of Data Roaming disabled to be enabled?
I thought that we were allowed 300 MB of data roaming without running into overages. I checked my bill today online and it said I use 981 KB out of 0 KB of data available while roaming, but it said I was charged $0.00 for this.
With the 2.1 upgrade, I have a little question about mobile network settings.I do not have 3G and do not have a monthly data plan. In 1.6, all I had to do was tick off "data roaming" in the Mobile Network Settings to make sure I do not ever connect to the 3G network.In 2.1, there are "Data Roaming" and "Data Traffic". If I were to tick off "Data Roaming", would that mean that the "Data Traffic" is no longer in use either, even if its ticked on? I do not want to tick off the "Data Traffic" option because it leaves a huge ugly picture on the notification bar.Any help would be greatly appreciated, as I do not want an abundance phone bill due to this!
I have the Everything Data Family 1500 Share Plan.Just check my data usage today. What is this Roaming Data Charge?I was in USA and in the states all the time.Anyway to avoid this in the future? There's no charges now, but it could get worst.
I've got an application which is making a web request every 10s using HttpURLConnection. When the application starts in 3G, it works great. Then I activate Wifi and after that, all my requests fail during exactly 10 minutes with the fallowing exception : Socket is not connected. The behavior is the same if I start in Wifi and then I switch to 3G. What's the problem here ? Do we need to setup something at socket level ? a timeout (10 minutes is the default one) ?
I live in Singapore and need to travel around 6-8 times a year. Being in Singapore, all travel is international hence data roaming charges apply.Every time I travel, I go through a laborious process to reset my wireless / sync / settings.I am hunting for a 'Data Roaming Manager' app where I can define profiles with associated wireless / sync settings. I could define a profile that specifies the settings I described above. After I define the profile once, every time I travel, I just need to toggle the settings on/off. A key need is that this app should cover all possible wireless / sync / download settings. Anything that impacts data download/upload.I don't have the necessary skills to create an app like this but am willing to work with someone who does. I am reasonable sure that people would be willing to pay for such an app at the right price.
Just back from a very nice vacation in Iceland, and await the data roaming bill from my phone company. I hope for the best having limited my traffic as much as possible, but I want to know in advance. I used the very nice app NetCounter but it didn't measure roaming data traffic at all.So I want to build my own app measuring just roaming data traffic. I have a few booleans to start with ( NetworkInfo.IsRoaming() & TelephonyManager. isNetworkRoaming() ), but I'm not sure how to measure the traffic if true.So the question is: How do I measure data traffic while roaming? (Something like API level 8 TrafficStats functionality is what I'm after, but for API level 3). The used SmartPhone is Samsung Galaxy i7500 (Android 1.6)
I want to adjust some settings to disable/enable data roaming and switch GSM/AUTO mode as the functions provided by Settings.apk(Settings -> Wireless controls -> Mobile networks -> "Data roaming"/"Use only 2G networks").
I know there is a way to get the current setting of data roaming through the api android.provider.Settings.Secure.DATA_ROAMING. But I don't know if I could change here to control the usage of Data roaming. If it is nothing but the status of data roaming. Changing here will cause the state of the system inconsistent.
Although I could find the api related to Data roaming, I can't find any thing about switching GSM/AUTO mode except for some internal api.
BTW, before this discussion I has posted an old related discussion, but I can't find it from the groups. Does this mean the system miss the discussion I posted?
I'm about to take my Hero overseas for the first time, and having seen loads of people stung with huge roaming charges for data, I want to make sure I don't end up paying anything.I have Data Roaming unticked in the Mobile network settings, is there anything else I need to do?
My data roaming isn't working i can make calls and stuff but not internet, i heard a prl update did this so can anyone show me how to downgrade prl? and anyone confirm a prl that works with data roaming?
can you guys give me simple procedures to make sure the data roaming is not allowed, i am going overseas and want to only make use of text and network for phoning! but i dont trust i wont end up with a massive bill
I was trying to find out from T-mobile, how long 15 PAYG foreign Data roaming (I'm from the UK, but travelling to Belgium for a few days) would last. I know it depends on usage, but they couldn;t tell me if I, say, checked my emails a couple of times and used the GPS a couple of times a day, how big a chunk of my 15 it would take.
I'm on a tmobile contract, free mobile, included, and I notice there's an option in my hero's setting which is unchecked at present for data roaming. I tried checking it, and it warned of the prospect of extra chrarges. Will this be the case, with my contract?
I hope someone can help me with this, since searching has not yielded any help. I am overseas with my DHD and continue to receive SMS messages even though I turned data roaming off. I know I am being charged for this and now I am too afraid of turning the phone back on. I just want to use it for wireless and downloading some new apps, without phone calls or messaging.
Just wondering if anyone knows how data roaming works with Sprint. I was in an area where I was roaming but it seemed as though the Facebook app was updating. Maybe I hit a pocket of wifi access, I dunno.So, is data roaming happening? If so, is it included under the "no roaming charges" umbrella that comes with the Everything plans or could be be charged for roaming data?
Just rooted my replacement phone after bricking the first one and now after I've rooted in some places we're I've had service before now an orange triangle will pop up saying "data roaming" never seen this before since I've had the phone since july.Has anyone ever had this problem before or know how to fix it? Also below the" data roaming" it also says" data connection was lost because you" it cuts off and I can't figure out what it says
I have a question about data usage while roaming. Multimedia messages are the same as data, thus I cannot send a picture message while roaming (I have my phone set to reject data if roaming). But sometimes I do not notice the roaming signal until after I hit send. If this happens, my EVO will continue to try to send the message and will alert me of the failure every couple of minutes.
Is there a way to stop this from happening? In other words, if I try to send a picture message, and I am roaming, is there a way to put the whole process on hold until I get a full signal again? It is very annoying to have it keep beeping at me. The only way I can stop it is to put the phone on Airplane mode. But then I can't do voice calls, or send and receive regular texts.
Is there a shortcut or widget to simply turn off/on the data roaming option?It would be so much easier than going through home/ settings/ data manager/data delivery/data roaming/click.Don't see anything in the Market that serves CDMA or the X.
I am taking a holiday to South West France (Nantes Area) in July and hope to use Google Navigation but I am a bit concerned about data usage. I am on t-mobile 3gb limit but that won't apply as soon as I go out of UK coverage,bearing in mind $5.00 per a MB I could use a a lot of MBs to make a 200 mile journey. What my main concerns are,
1. Although I can set up Google to navigate to where I am going at home, will it cache the route but if I exit Google Nav is the route deleted. 2. Would it be best to buy a euro data bundle from t-mobile,I don't intend using the phone for anything else,apart from perhaps an odd call or text. 3. Try another Navigation app,have tried Andnav2 but can't seem to extract the maps onto my phone and have tried it where I live and it wanted to send me a longer route down country lanes rather than the direct route. 4. Buy a French PAYG SIM card with some data allowance,could be difficult as my French is not that fluent! 5. Buy a Navigation app such as Destinator 9,don't really want to pay for something like that. Perhaps I could get away with the trial period. 6. Scrap the whole idea and use some thing like mapdroid,or just buy a road map.
I just want to get to my destination without paying a fortune or running up a huge bill without knowing it.
Whenever I leave my home Wi-Fi hotspot, my phone seems to pop up with a notification, asking me if I want to go in to roaming mode (or something along those lines - I can't remember the exact phrase and I can't recreate the notification without leaving the house). I've only noticed this when I've come to pull the phone out of my pocket. I tell it to just carry on using my mobile network for data connectivity.
When I return home, instead of returning to the Wi-Fi network, it carries on using my mobile network for data connectivity.
How do I get the phone to automatically switch to using my mobile network for data when I'm not in my hotspot and then to automatically switch back to it when I am in the hotspot? It's driving me mental at the moment, and there doesn't appear to be anything obvious in the phone or any documentation!
What do I need to do for network connections to be implemented automatically?
I have been a Sprint customer for a very long time. My wife and I both have smartphones and we have the Unlimited 1500 plan. To my knowledge, this includes everything (excluding International calls.....which I know for a fact thanks to an $1800 fraud that was on my bill 2 months ago). I digress, data roaming is included as a part of this plan as far as I know.
I checked my bill online yesterday, and there was an alert that I have used 3800+KB of data roaming.
Now....let me start by saying, yes, I do have the setting checked to allow for data roaming (as to my knowledge, it's included in my plan). I do have the Hero (my second one) and for the life of me, I can't figure out why it goes into roaming mode more than any other Sprint phone I've ever owned. My wife's phone could be sitting next to mine, and I'll be roaming while she is not. That being said, I can guarantee there have been instances where I've roamed and pulled down data (checking email, automatically checking weather/facebook/twitter/etc, internet) and I've never seen this alert on my account.
I called Sprint last night to question it, and they put a $20 service credit on my account. That's all fine and great, as I'm not going to turn down free money, but I had explained that my concern was that the alert is showing up to begin with. I even explained that while I appreciate the credit, I'd rather just have this situation resolved so that I don't have to call back next month if these charges appear.
My question is this, has anyone ever seen this before? I am rooted, I am running Fresh 2.1.1 and I have the latest SPRINT radio flashed from Flipz' website. I have had this setup for a little over 2 months now, so this isn't the first billing cycle that this setup has seen. I can't figure this out for the life of me.
If this continues to be a problem, it's either going to require a new device or a new carrier. I live in a very populated western suburb in Chicagoland and have NEVER had a problem with roaming or poor signal until I got the Hero in October.
I'm heading to Halifax, Nova Scotia for a week and will be bringing my Hero with me. I'll be calling Sprint customer support to see what options are available for voice and data, but I trust the advice of folks in this forum.
Is there any international voice and data plan that i can sign up for so that I don't end up paying sky-high roaming rates? I really don't want to have to keep my phone in airplane mode the whole week. Any advice from travelers to the "Great White North" would really be appreciated, eh?