General :: Compiling Realtek Rtl8188ctv WiFi Module

May 20, 2012

I have a device labelled Superpad VI. everything was okay but when i tried firmware update, its wifi stopped working and started giving "error" when i try to turn it on. Now I have just figured out that the original superpad VI has ralink wifi chipset whereas this device has realtek rtl8188cus chipset. so when i try to install superpad VI firmware, everything else works but wifi doesn't. Now how do I need to install the drivers for wifi? I have found the Linux/Android drivers from Realtek website but they need to be compiled. I know nothing about compiling/programming and Linux itself.

The un-compiled drivers can be found here (under rtl8188cus) [URL] ....

General :: Compiling realtek rtl8188ctv WiFi module


ADVERTISEMENT

General :: Kernel Compiling Error During Generating Bcmdhd Module?

May 22, 2014

kernel compiling with GCC 4.8 google toolcahin:

Got this error during generating bcmdhd module:

Quote:

CC [M] drivers/net/wireless/bcmdhd/wl_cfgp2p.o
drivers/net/wireless/bcmdhd/wl_cfgp2p.c: In function 'wl_cfgp2p_act_frm_search':
drivers/net/wireless/bcmdhd/wl_cfgp2p.c:769:31: error: array subscript is above array bounds [-Werror=array-bounds][code].....

View 3 Replies View Related

General :: Zync Z930 Realtek WiFi Driver And Battery

Jan 21, 2013

I have disassembled my Z930 Tab.I found that my WiFi chip is from RealTek (8188CTV or 8188CIV, Can't make out the model name, too small) whereas my tab has some HTC port rom which has the driver for Broadcom's chipset. I found the driver, its RTL8188CUS. But I don't know how to compile it for Android. uninstall Broadcomm's driver and install RealTek's. My custom ROM is running on JB.

View 2 Replies View Related

General :: WiFi Module And Battery MAh

Jan 2, 2013

Is there any method to find the manufacturer of the WiFi module inside the tablet and the mAh of the battery without disassembling the tab?

View 3 Replies View Related

General :: Unable To Load WiFi Module On Sony Xperia E

Jun 11, 2013

I am trying to compile a WiFi driver (ath6kl) for my Sony Xperia E (Android version: 4.1.1, compilation: 11.3.A.0.47). I have downloaded the source code for compilation 11.3.A.0.47 from here: developer.sonymobile.com/downloads/xperia-open-source-archives/open-source-archive-for-build-11-3-a-0-47

I have compiled required kernel modules (cfg80211 and ath6kl_sdio), but I have encountered some problems during this proccess. I don't understand why on my android device (in /system/lib/modules/ath6kl) there are two modules: ath6kl_sdio.ko and cfg80211.ko (first one depends on the second one). But when I look at my sources, I see the following module dependencies for ath6kl: ath6kl_sdio -> ath6kl_core -> cfg80211. So there are 3 modules instead of 2. Anyway, after some modification (I merged ath6kl_core and ath6kl_sdio into one module) I managed to compile ath6kl.

I have replaced compiled modules in /system/lib/modules/ath6kl on my android device, then rebooted and I got the following error:

<4>[ 23.055226] ath6kl_sdio: disagrees about version of symbol cfg80211_sched_scan_results
<4>[ 23.055251] ath6kl_sdio: Unknown symbol cfg80211_sched_scan_results (err -22)

[Code]....

I am very desperate cause I want to modify this driver (to be able to calculate some network statistics) but I cannot load modules at all so I am stuck.

View 1 Replies View Related

General :: App Or Xposed Framework Module To Show WiFi SSID In Statusbar

Mar 26, 2014

I'm looking for app or Xposed Framework module, which displays WiFi SSID in statusbar near to WiFi icon. It is possible?

View 2 Replies View Related

Android :: Module Version Conflicts Between Wlan Module - Kernel Source

May 17, 2009

I'm tinkering with building and installing Android from source. Basically I've got it down fairly well, but I seem to have run into a bit of a problem with the wlan module, probably from HTC.

Having pulled the 2.6.27 kernel sources and built that with a .config pulled from the phone, and using that as the kernel image instead of the prebuilt one, I get the following wifi failure message in dmesg:

wlan: version magic '2.6.27-00205-gf2dabc0 preempt mod_unload ARMv6 ' should be '2.6.27-00392-g8312baf preempt mod_unload ARMv6 '

probably because the .config I pulled from the phone has:

CONFIG_LOCALVERSION="-00392-g8312baf"

So I rebuilt with the '00205' localversion and now I get in dmesg:

[61.122497] wlan: Unknown symbol trout_pwrsink_set

but trout_pwrsink_set was changed to htc_pwrsave_set way back in February:

[ARM]: trout: Switch from trout_pwrsink -> htc_pwrsink 33/8933/1 http://android.git.kernel.org/?p=kernel/msm.git;a=commitdiff;h=44a01f...

I'm clearly getting an obsolete wlan module somehow, Any ideas for how I can get a wlan module that goes with the '00392' kernel would be appreciated.

View 3 Replies View Related

General :: What Does Compiling Exactly Mean

Mar 26, 2013

i came across a word related to android "compiling". What does compiling exactly mean?

View 9 Replies View Related

General :: Compiling Android For ZT-282

Sep 2, 2012

If I have the source code compatible with the Zenithink ZT282 but its based on Android 2.3.4 can I use it to compile cm7.2 2.3.7 with the cm7 source.

View 1 Replies View Related

General :: CM9 Compiling Errors

Jun 6, 2012

I'm trying to compile CM9 for my Galaxy Mini, but I always get these errors:

Code:
frameworks/base/core/java/android/view/inputmethod/InputMethodManager.java:1485: cannot find symbol
symbol : variable config_symKeyShowsImePicker
location: class com.android.internal.R.bool
if (context.getResources().getBoolean(com.android.internal.R.bool.config_symKeyShowsImePicker)) {

[Code] .......

View 2 Replies View Related

General :: Unable To Install MODULE

Dec 10, 2013

Unable to install MODULE, I have a problem regarding my A13 android tablet device. It doesn't matter if I will post the brand name of my tablet or whatever because what I only wanted to fix is this. When I follow every instruction written at this link, and following instructions 1-7, after reaching step 5 execute run.bat. It displays the following image I screen captured. (And my tablet doesn't reboot, it's the sign that the computer can't access my tablet.

Obviously, my tablet is connected to the computer via USB cable after running the run.bat as administrator.But what is the problem why it is happening to me. (Additional information: I already installed and followed this instruction on this same device with no error at all. But why does it happened to me even I installed this with success before. I don't change any system file on my tablet before, and I don't know because,I didn't change any file or modify file neither on my tablet nor from my PC.)

View 5 Replies View Related

General :: Cannot Find Symbol When Compiling CM 11.0

May 31, 2014

Cannot find symbol when compiling cm 11.0 on debian.

Code:
packages/apps/Settings/src/com/android/settings/hardware/DisplayColor.java:109: cannot find symbol
symbol : method getDefValue()
location: class org.cyanogenmod.hardware.DisplayColorCalibration
int defaultValue = DisplayColorCalibration.getDefValue();
^
Note: Some input files use or override a deprecated API.
Note: Recompile with -Xlint:deprecation for details.
Note: Some input files use unchecked or unsafe operations.
Note: Recompile with -Xlint:unchecked for details.
1 error

View 3 Replies View Related

General :: Compiling Framework And SystemUI

Apr 18, 2014

I'm very familiar with using APKTool and Compiling/Decompiling Apps. I've run into a problem with the framework-res and SystemUI apps.

Current ROM/App info:
Samsung Galaxy Tab 3 8.0
Android 4.2.2 (Samsung Touchwiz)
Framework Installed in APKTool: framework-res.apk, twframework-res.apk and SystemUI.apk
APKTool Version: 2.0 (I've tried almost every version of APKTool and AAPT)
Java Version: 1.7 (as required by APKTool 2.0)
OS: Windows and Linux (same results on each OS)

The framework and SystemUI apps decompile fine. No errors and all the XML/Smali files are perfect. The problem is that I can not recompile either of them. Each time I attempt, I get the same error regarding the Android Manifest file....

Code:

brut.androlib.AndrolibException: brut.androlib.AndrolibException: brut.common.BrutException: c
rut_util_Jar_8264547236691306049.tmp, p, --forced-package-id, 127, --min-sdk-version, 17, --
me, 4.2.2-T310UEUAMH2, -F, C:UsersAdamAppDataLocalTempAPKTOOL3953045592385201216.tmp, -0
:UsersAdamDesktopProject_Tab3_4.15OriginalFilesSystemUI
es, -M, C:UsersAdamDesktopP
xml]

[code]...

I know some dev's have been able to sucessfully compile these apps .

FYI - I have even tried compiling the stock apps without any mods and I get the same errors.

View 9 Replies View Related

General :: Building CyanogenMod Kernel Module?

Mar 23, 2012

<3>[ 154.264768] bcm4329: version magic '2.6.35.14-cyanogenmod-g1ad182f preempt mod_unload ARMv7 ' should be '2.6.35.14-cyanogenmod-g704f542 preempt mod_unload ARMv7 '

I've successfully built the samsung-kernel-crespo kernel from the cyanogenmod git. I unpacked a working ramdisk from a nightly and repacked it with my kernel, when i try to load the module i get the above error, The "extraversion" info that in the "about phone" tab in sittings is 2.6.35.14-cyanogenmod-g704f542, as well as the version of the modules. but for some reason the kernel is looking for that 'g1ad182f ' instead.

I loaded the module via fastboot boot boot.img and i didnt full on flash it to the phone. I backed up the working kernel module and put the new one in /system/lib/modules, rebooted the kernel and the wifi is still giving me an error.

If i try to manually insmod the module and it hangs, if i use modprobe then lsmod it says its "loading" but never loads.

the phone im working on is a nexus s if that matters.

View 1 Replies View Related

General :: Install Framework Module Without Getting Bootloop?

Apr 8, 2014

I have a rooted Iocean G7. I wanted to install the framework module with the Xposed installer app. This was no success, I got a bootloop. After this I contacted Iocean, and I have flashed my phone with the computer. It works fine now, as it should.

how can I install the framework module without getting a bootloop or other problems?

View 9 Replies View Related

General :: Any Way To Add Advanced Routing Via Module To Kernel?

Nov 5, 2012

If a kernel does not have the Advanced Routing feature (which is needed for VPNC widget - Cisco VPN) is it possible to add this via module like tun.ko module? The Adv. Routing is not needed for connecting but the connection is soon lost.

View 1 Replies View Related

General :: Smali Changes Not Compiling - Transparent Status Bar

Aug 25, 2012

I'm trying to get my status bar transparent following this guide [URL] .....

I'm using wanams apk manager, I make the changes to the statusbar.smali file and the xml files, I compile and it doesn't work on my phone, so I decompiled the modified apk, and the changes to the xml files went through but the smali files go back to the originals.

when compiling I use yes on Is this a system apk, yes to copy additional files, go to keep, delete resources.arsc and finish.

It happens with any smali file when I compile, I use notepad++ to edit the files.

So what I ended up doing since my xml files were saving but my smali files weren't, I didn't realize that when compiling it asks to copy over files and the classes.dex file was overwriting all my changes to the smali files, so I compiled and when it asks to delete files from the keep folder I took the classes.dex from that folder, decompiled it seperatly made the changes to the smali files there. I still deleted my resources.arsc, then I finished making the apk opened the apk and replaced the classes.dex there with my modified one. pushed to my phone and everything works perfectly.

View 3 Replies View Related

General :: Compiling Android Source Code

Mar 8, 2014

I'm compiling android from source. After compilation I have following output:

See attachment for output message. (could not post it here)

Did it compile? I suspect not. So, Why?

View 1 Replies View Related

General :: Compiling Kernel With Governor - Getting Errors

May 2, 2014

I am trying to compile a kernel for my device(kyleprods or GT-S7582 or Galaxy S duos 2) because I havent found any custom kernel out here. Im compiling from source. I tried compiling WITHOUT any tweaks or such, just plain compile after downloading the source, and it compiled successfully. I tried adding smartassv2 but I got these errors after running "make -j1" twice.

CHK include/linux/version.h
CHK include/generated/utsrelease.h
make[1]: `include/generated/mach-types.h' is up to date.
Creating rdb link for Hawaii
CALL scripts/checksyscalls.sh

[Code] .....

cc1: some warnings being treated as errors
make[2]: *** [drivers/cpufreq/cpufreq_smartass2.o] Error 1
make[1]: *** [drivers/cpufreq] Error 2
make: *** [drivers] Error 2

View 3 Replies View Related

General :: Compiling XML Results In Gibberish (still Works)

Oct 16, 2012

I'm having bit of a strange issue. I've been editing a Mms.apk by decompling it with apktool and then chaning png, editing xml files ( I Use dreamwaver cs6, but have tried with notepad++ too) and the likes.

But when I then recompile the apk something strange happens to the data stored in the xml files, like it gets encrypted or messed up somehow. They still work tho since Ive pushed the Mms.apk to my system/app and the changes I've made are clearly shown+working.

But it makes it difficult incase I want to redo some changes in the XML files by decompiling the new Mms.apk. I've uploaded one xml file with the changes ive made, and then the same after it has been recompiled to my dropbox.

[URL] ......

View 1 Replies View Related

General :: Linker Error When Compiling CM 10.2 For LG E970

Nov 20, 2013

I get this weird linker error when trying to compile CyanogenMod 10.2 for the LG Optimus G (e970 [AT&T]):

Code:
make[1]: Leaving directory `/home/greg/android/system/kernel/lge/gproj'
mdpath=`find /home/greg/android/system/out/target/product/e970/system/lib/modules -type f -name modules.order`; if [ "$mdpath" != "" ];then mpath=`dirname $mdpath`; ko=`find $mpath/kernel -type f -name *.ko`;
for i in $ko; do /home/greg/android/system/prebuilts/gcc/linux-x86/arm/arm-eabi-4.7/bin/arm-eabi-strip --strip-unneeded $i; mv $i /home/greg/android/system/out/target/product/e970/system/lib/modules/; done; fi

[URL] .....

I can't figure out which library or object file I'm missing that would resolve this reference. Btw, I've tried building it a couple ways: typical "brunch", and lunch / mka. Both produce the same error.

View 1 Replies View Related

General :: Errors Compiling MIUI SystemUi?

Jul 22, 2013

I installed android SDK and the apis

I use APK Tool

Galaxy Nexus on MIUI 3.7.12

I was trying to enable carrier logo

When decompiling, i install the 2 frameworks (framework-res.apk and framework-miui-res.apk)

View 1 Replies View Related

General :: Module Flying Android Doesn't Work

Mar 5, 2014

I have a rooted Nexus 5 with stock rom.

I tried to use xposed module "flying android", it works when I start it within apps overview, but not as explained in the video by pressing long the home button. I always get the google now icon.

View 9 Replies View Related

General :: Xposed Module To Change Font Color?

Aug 17, 2013

Was just wondering if any devs out there would be willing to make an xposed module to change font color. Hope i posted this in the right section.

View 4 Replies View Related

General :: Xposed Module To Change Menu Background?

Feb 7, 2014

Is there any xposed module to change the menu backgrounds / the slider colors?

This blue background and the blue slider?

And these backgrounds

I know many themes change these backgrounds, but i was wondering if a xposed module out there which can do this

View 9 Replies View Related

General :: Error While Compiling CM11 For Galaxy Fame

Apr 11, 2014

Downloaded all the sources of cyanogenmod for 4 and a half days, until then all right, when I tried the commands "brunch" and "breakfast" had some errors telling me you wouldn't find the repositories to the Galaxy Fame codenamed nevis ...

[URL] .....

View 1 Replies View Related

General :: New Rom Builder - How To Include Trinity Kernel When Compiling

Nov 3, 2012

I've started compiling AOKP roms for Toroplus and Maguro recently and I'd like to start including Trinity Kernel in my Rom.

I know it can be flashed after the rom but I'd like to have it come installed with it.

View 1 Replies View Related

General :: Compiling Power Control Widget (from Settings App)?

Apr 8, 2013

I've been trying to compile the original code for the power control widget from the "settings" app, but it won't because of the missing / hidden / internal classes,I remember with a modified Settings apk with more or modified buttons in the widget.

View 1 Replies View Related

General :: Xposed Module - Button On Statusbar To Lock The Screen

Oct 25, 2013

I'm searching a mod to install on my galaxy s4 i9505 that can add a little button on the top edge of statusbar that can lock the screen if pressed.

Something like the attachment.

On android 4.2.2 there is 3minit framework, but I can't find a similar mod for android 4.3.

View 6 Replies View Related

General :: Specify Kernel Module Load Path In Config File?

Sep 28, 2011

I needed a tun.ko module for my kernel, so I tried compiling my own kernel.

The kernel did build OK, and also boots OK, the only problem is that I cannot load any modules.

It seemes, that the module tools (insmod, modprobe etc) looks for the modules in /lib/modules, and I have them in /system/lib/modules, so my wifi does not work, as I cannot load the module.

Where I can specify the kernel module load path in the .config file?

Example:

# cd /system/lib/modules
# ls -l
-rw-r--r-- root root 315403 2008-08-01 14:00 bcm4329.ko
-rw-r--r-- root root 211573 2008-08-01 14:00 tun.ko
# modprobe bcm4329.ko

[Code] .....

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved