I have Tablet PC Q8 model gs701b. Firstly it worked properly but i decided to change rom. After i install new rom Front camera stopped to respond. Tablet didn't recognize it. (It thinks that front camera doesn't exist :X ) And the other problem is that rear camera doesn't work properly either. It shows show image such as in mirror :X I have tried to install on it many other roms Such as 1) TF-20121031-Q8-0329camera.zip (Doesn't work touchscreen) 2012092002_Q8_TF.zip (Doesn't work touchscreen). Q8-New-UPGRADE_FAST.zip- (Works) and Now I have OVO light Update 2 It works great but camera still doesn't work properly. :X what to do ?
My Quest tablet is accidentally locked yesterday it asking for gmail and password but i forgot the gmail id and password.So after a long search i found lots of things such as unlocking tablet pattern lock,gmail lock,pin lock etc.These topics only be successfull only when the tablet is in recovery mode.So i tried to put my tablet into recovery mode by pressing vol + and power button.But there appears a android bot lying with red traiangle exlamation.So i simply tried to access recovery menu by pressing power and the vol + .But nothing happens neither than a dead android bot lying down with a red traiangle.
I'm having an issue with my tablet, an Onda VI40 Ultimate. It was left off for a day or two, and when I plugged it in yesterday I got the battery screen, but it was in orange and showing that it needed to be charged. I figured I'd leave it alone for a few hours, then come back to it.
I left it plugged in for four hours, but when I came back to it the tablet is just giving the same message. I took out the charger, plugged it in again and got the same screen. I plugged it into my desktop pc via usb cable, and it just gives the same screen over and over. I got another charger, one exactly like it, and plugged it in. Same screen again. I pressed the reset button, same screen. I tried holding down the power button and volume up button, but no deal. I have the latest CM9 build installed on it, with ICS 4.0.4.
I have included below a terribly blurry photograph of what I'm seeing when I try to turn it on, or do anything with it. The tablet just never seems to charge no matter what I do, nor will it boot in any way.
A Tasker task that when I'm on the lockscreen, I can tap or double tap to turn the screen off. I've looked in the Tasker tasks and I'm unable to find anything for this. I already use the Nova gesture+ScreenOff app to turn the screen off when I'm unlocked and at the homescreen, which works perfectly. The only thing Nova can't do it turn the screen off from the lockscreen.
Ive had a rooted Alcatel One Touch Fierce for about a month. Just recently a Tmobile update downloaded and i installed it. My phone rebooted and ever since then my screen turns off or goes black everytime i turn the screen on. For example when i press the lock button to wake my phone it will display for at least a second then go black but the touch is still functional so id have to navigate by guessing where everything is then pop the screen on for a second to see where i am. The only exception is when i bring up my keyboard or edit settings like when a slider pops up for brightness. I can see the android startup screen until its fully rebooted and i can see the recovery mode. Ive reformatted my data and cache. It is also not the timeout setting. I cant find anything about this issue anywhere.
I have a China copy of Samsung note its a I9220 with a android version of 4.1.9 athough looks like a copy of gingerbread.
Build number is Alps.ics.mp.v1 Google play reports phone as Alps I9220
My wife has done a reset on the phone, now the phone is showing invalid imei number on both sim cards.The phone has network connection but cannot make calls.The IMEI numbers are listed under the battery, how can i change the IMEI on the phone so i can make calls again?
I keep getting a message when battery is low and runs of power. When i try to turn on the tabletI get a blue screen that asks to reboot and a series of requests to update in Various ways. When I reboot it comes on and is glitchy. It turns on in safe mode. When I check out the requests I get a Scary green screen with a lot of writing and symbols I don't understand. Also I can't get the information for the nook that on the tablet, it won't open. Very much. not a skilled user of this new technology stuff. Of age to remember as an adult getting my first computer with no Internet
how to screen mirror between my Samsung galaxy note 3 and my Samsung galaxy 10.1. i want to watch movies i have downloaded, through Google play, on my phone on my tablet for a bigger screen. I have sprint for my phone and my tablet has no service. Where this connection needs to happen is in places with little or no service. And before you say just download movies to my tablet when i'm hooked to wifi, i have. My tablet only holds 3 movies at a time, while my phone holds more than 10.
Would like to have EASY capability and not the need for anything bulky to take the screen on a PC / Laptop / Tablet and share that onto a HDTV or Projector for group projects in an office setting. Tablet is not a must but would be nice to be able to do going forward. So the idea would be someone who show an idea from their Laptop and plug in something of a USB device or could be software based but that is not preferred option. The project then could be sent to HDTV or Projector via possible wireless casting device. Have looked into various devices but hoping for some feedback from someone who has set this type of room up. Additional notes would the HDTV or Projector would NOT be connected to any server or PC we want it to be done wireless directly from the PC / Laptop / Tablet and screen shared directly to the HDTV / Projector.
I have a Android tablet and I want to use it as a second screen for my computer. Of course there is Apps for this like iDisplay, but it's not at all comfortable, and i prefer USB. So is it possible to use the tablet like a second screen only ? Turn off Android and just use the screen of the device ?With Windows 8 we can easily share the screens, and i want to optimise that point...
I have a A10 Chinese Tablet with no brand (called DesireTab) and no official firmware, I have try to install cwm with no success and after my tablet no more boot in android but only boot in cwm ... I have try to install ROM from other tablet but the only want to boot is one from LY-F918 ... with no touchscreen and wrong colors (I post a photo of the boot), after I mod a ROM from Cherry Mobility M906(??) And touchscreen and all other hardware works but not the colors ..
P.s. I have open the tablet and disconnected lcd flat And reconnected ... with no luck !
Recently I have rooted my android tablet and I was exploring what I could do. One guy was telling me about an app that can work with performance in game(ChainFire 3D). He said it lowers the pixels in the game to run better. I tapped the install button and it said rebooting now. It then started to reboot but then proceeded to get stuck at the boot screen. I tried doing a hard reset but it is still stuck. I have also tried flashing the stock rom, but I get installation aborted when I try and install it.
I have a Motorola XOOM WIFI US version (don't remember exactly the Android version, but it's 3 point something). It was rooted and unlocked, but I decided to relock it, so I followed a tutorial to do it.
Everything worked fine and, despite the long process and the several steps, I didn't have any problems at all, but when I finished flashing the images from the usb, the tablet automatically rebooted and now it's stuck at the boot screen, with the Motorola logo.
I have read some topics with the same issue and I always see the same solution: go into the recovery mode, but the problem is that I can't even access the recovery mode. When I push the vol + button to select the "recovery" option, I just got a message "Reading ODM fuse: 1", and there's nothing else I can do. I can't even shut the tablet down.
I received a generic Chinese table. it worked well for about two-and-a-half months. Then, just recently, I discovered rooting and the wonderful things it allowed you to do. I decided to download a system-tweak app, which included a CPU control. I was a little wary of overclocking my CPU, having heard it may decrease its life expectancy, but finally I thought "What the heck?" and in a brilliant stroke of genius cranked my 1Ghz processor up to 1.5Ghz, and it promptly froze, forcing me to power it down. When I turned it back on, I discovered that it had been factory reset. I re-installed my apps, including the system-tweak app, and decided not to touch the CPU controls for a while. Soon after, while at my sister's talent show, I discovered I had about 30% battery life, and I was still supposed to record her. So I figured I'd underclock it to save the battery.
Unfortunately, as my finger touched the slider, my brother bumped my arm and caused me to lower the CPU frequency to its lowest setting. It became extremely sluggish, almost to the point of being unresponsive, and finally I had to shut it down. When I restarted it, it started to boot but then got stuck on the shimmering Android logo, and now that's all it does. I can't even boot into recovery mode, and unfortunately I had just turned off USB debugging that same day.
I dropped my Note 2 yesterday and the screen started slowly turning blue. This morning, the screen completely got filled with blue/white/messed up color, and then went completely black. Touchscreen still worked though because I was able to maneuver around the phone right after it was dropped. Screen was not cracked. does the screen has to be replaced as well or i can replace it with smaller parts?
Device: MTK6575 Tablet with Analog FM OS: Android 4.0.4 Condition: USB Debugging enable
Currently my Tablet behave strangely where when I switched it ON, it did run as per normal. But when I slide the unlock slider, the Tablet switch off.
I did a backup user data. Try entering recovery, wipe data/reset factory. Reboot the Tablet, it also did run as per normal. But when I slide the unlock slider, the Tablet switch off.
Then I try another approach. Try entering recovery, wipe data/reset factory. Connect the USB cable to computer. Reboot the Tablet, it also did run as per normal with no unlock slider where it did show a USB enable menu. Press back and it did run as normal. Then I disable the "slide the unlock slider" in setting. Everything work as per normal. Try restart and no problem.
Then I restore previous user data, unfortunately I cannot disable the unlock slider. Try Connect the USB cable to computer, the slider still there.
I'm looking for a way of disabling the unlock slider via ADB command.
Another way I can think of is sideload "Screen lock suppressor" apk into system.[URL]...
Now I forget how to push the apk into system. Or, any other apk to disable the unlock slider.
I have an ANDROID tablet with screen resolution of 600*976 which is quite rare and is not supported by many ANDROID apps....here comes the question : is it possible to change the screen resolution of display? eg 800*480?
i have here a 7'' tablet that i would like to insert in a acessorie in my car. the problem is that once inserted, i cannot seed the entire screen. i have to reduce the screen displayed in the tablet to match the accesorie size. is any app or mod to do it?