General :: Ainol Novo 9 Spark Locked Bootloader On Paranoid Android 3+?
Jun 23, 2013
I have installed the paranoid android 3+ rom but now I cannot access TWRP or the bootloader screen. Android boots normally and the tablet is perfectly functional. When the tablet is off, there is no way to get to TWRP using the keys (power on with Vol- pressed etc. I have used all possible combinations). Also, there is no option to boot into recovery mode from the menu in "Backup & reset". Also, when I try to boot into recovery through a terminal emulator it again boots into andoid normally as if I just did a normal reboot. The "reboot recovery" command issued from the terminal emulator does not boot into TWRP. Trying to boot into recovery mode from within Phoenix Suite again boots the machine normally rather than in recovery mode. It's driving me nuts. Could it be a corrupt/locked bootloader? Is it something else? It seems to me that the only possible path for the bootloader is to load Android.
Is there any way to blind flash the bootloader again? It seems that this is the culprit since I can copy TWRP to nandg through the terminal emulator ("cat /extsd/recovery.img > /dev/block/nandg; sync; sync ;sync" but then again rebooting goes into android rather than recovery mode.
The tablet connects normally through USB to my PC and adb sees it properly.
View 4 Replies
Sep 26, 2013
i accidentally plugged in a 12V instead of original 5V charger in my brand new Ainol Novo 9 Spark today..
Screen stays black if i try to boot it and its not charging anymore if i plug in the original 5V charger
Is there anything i can do or should i just throw it into the trash?
View 1 Replies
View Related
Apr 10, 2013
How to root ainol nova 9 spark.
View 1 Replies
View Related
Jan 28, 2014
i upgrade unoficial rom,and when i restarted the touchscreen not working.
I have searched and installed a lot of original and custon roms,but it continue not working.
My tablet is Ainol novo 9 spark firewire a31 allwinner
View 1 Replies
View Related
May 10, 2012
Is MIUI available for the novo 7 elf? Or has it been ported to it?
View 1 Replies
View Related
Nov 27, 2013
I'm having a problem with my Paladin. I bought USB OTG cable and it look's like it doesn't work. When I connect any of 3 pendrives only one will blink but still no result in tablet.
I've tried running it many times but without luck. USB OTG Helper shows theres No Drives Found!. I saw person got it working: [URL] .... but I cannot understand, how to get it to work ?
View 1 Replies
View Related
Jan 30, 2012
I have Ainol Novo 7 Avdanced tablet with Allwinner A10 CPU and Mali-400 GPU. It's HDMI output equipped tablet. I would like to change (to lock) HDMI mode from 720p60 to 720p50 or 1080i50, because my TV doesn't support any xxxp60 mode. Is it possible to do somehow?
View 5 Replies
View Related
Mar 12, 2012
i have problem with my Novo 7 Paladin. One week ago i installed Google Maps update. After that my tablet was very strange. Sometimes when it go to sleep it won't wake up. I had to press power on again. Later that week there was some graphical glitch on screen (blinking colors). And now i can't boot at all. So i tried the SD card method to recover system. The problem is that i can't boot. Combination of keys like VOL+ and POWER or VOL+ and RESET doesn't work. Then i tried the original USB Boot Tool from Ainol. This tool doesn't work either.
USB Boot Tool
1) install correct USB drivers (press VOL+ and plug USB) select drivers from tool/drivers/4770
2) unplug USB and start USBBootTool.exe
3) press VOL- and plug USB
4) it says BOOT... please waite0% (attachment boottool.JPG)
5) after some time of waiting the error apears (attachment boottool2.JPG)
View 8 Replies
View Related
Dec 27, 2013
the stock rom and instructions of it? got bootloop.
View 4 Replies
View Related
Sep 11, 2012
I just bought an android tablet: 7" Ainol Novo 7 Tornados
How can I install Jelly Beans 4.1.1 on this tablet ? Should I just download jelly beans 4.1.1 copy for google nexus 7 and install that on this ? will it work ? is it ok to install an OS that is for different tablet ? My tablet is also 7 in...
Specs of my tablet:
Production Configuration
Model Ainol Novo7 Tornados Black color
OS Android 4.0.3 ICS
GPU Mali400
CPU ARM Cortex A9 Amlogic8726-M3L 1.0GHz
RAM DDR3_1G
Storage Capacity 8GB
Storage Expand UP TO 32GB
Screen 7.0 inch, capacitive multi-touch screen hd resolution of 800*480
[Code]...
View 2 Replies
View Related
Jul 26, 2013
I've buy ainol novo 10 hero quad a few month ago. Few days ago when I was flashing the firmware But i've instal the wrong firmware from Ainol novo 10 Ethernal. It onn's but the touch screen was "crazy" it was inverted, to push the button on the down left corner of the screen I must touch in the same spot in the upper right corner, to scroll home screen right I must slide my finger left e.t.c.
View 6 Replies
View Related
Jan 25, 2014
I cannot access the recovery mode of Ainol Novo 8 Advanced MINI Tablet. I tried holding power + vol+ button but its not working,
View 2 Replies
View Related
May 19, 2014
it is possible to make Android and Windows dualboot or not. The Acer Support told me that the bootloader is locked, so it is impossible to install it without hacking. So what I want to know is how I can hack the UEFI? I like Windows,but only for school or homework. I need Android aswell...
View 2 Replies
View Related
Sep 24, 2012
I am using Xperia neo V that is running on ics 4.0.4.
Recently I rooted my phone without unlocking bootloader.
Now I need to flash custom rom on to my rooted device with locked bootloader. How can I do it?
View 1 Replies
View Related
Apr 7, 2013
What exactly am I blocked from doing with a locked boot loader? There aren't too many roms out there for my Stellar... I figure I'd try to port one from an SIII... but with the seller's locked boot loader could I even get that far? Or is it stock Verizon roms or nothing? SCH-I200
View 5 Replies
View Related
Nov 18, 2012
I was able to root the device by downgrading it but when i upgrade manually thru flashtool to ics 431,root and superuser app is gone.i also tried Root_with_Restore_by_Bin4ry_v16 but it does not show any restore backup option and nothing happens.. I read each and every related forum searched web but no luck .
View 1 Replies
View Related
Jun 11, 2012
if a phone's bootloader is locked, like the Moto RAZRs, how could it happen to update that official stuff? And why is there no way to flash own stuff?
Whats the difference between an official and an unofficial ROM?
'cause booth are overwriting bootloader and kernel? or am i wrong?
View 2 Replies
View Related
Jul 7, 2012
is locked bootloader going to prevent hard brick? I want to flash some roms (stock kernel) but i am afraid of hard bricking it. There are a lot of people who say the only problem with locked bootloader could be just to soft brick it then just flash a stock rom and everything is fixed. Also what could happen if during the flash process i get a power off? NOTE: i have no recovery on my phone. My phone is Xperia Neo V -the best-
View 4 Replies
View Related
May 29, 2013
Are there other ways to flash a recovery with a locked bootloader?
My Problems:
I can't flash my stock recovery through fastboot with a locked bootloader.
I can't boot into my recovery because my current recovery is TWRP 2.5.0.1 and I have a locked bootloader.
I can't unlock my bootloader because I have used an IMEI Hack Tool and set my IMEI to 0 (I guess).
I can't boot into my ROM because I used an IMEI Hack Tool.
I can't Force Upgrade too (Vol Up + Down + Power). It only shows a pink/purple screen.
Solutions:
I can only flash a recovery with an unlocked bootloader.
I can only boot into a recovery with an unlocked bootloader (except for stock).
I can only unlock bootloader if my IMEI has restored.
I can only restore my IMEI if I can boot into my ROM.
I can only boot into my ROM if I have a stock recovery.
I can only Force Upgrade if I have restored my IMEI.
If I could only restore my IMEI through fastboot,
View 9 Replies
View Related
Apr 1, 2010
[SOLVED] Relocking your Bootloader - xda-developers
View 8 Replies
View Related
Jul 31, 2010
Here is a statement Motorola released pertaining to the DROID 2.
View 29 Replies
View Related
Jun 25, 2012
I got problem after installed Paranoid Android Rom. I dont have all the basic apps like maps or Youtube and I can't Dl them from Google Play, it says tat my devices doesnt support them.....
View 1 Replies
View Related
Jun 25, 2013
I just installed the Paranoid Android 3.60 ROM that I downloaded via this link [URL] ..... I am using a Sprint Galaxy Nexus.
The problem I am running into is with the "hybrid properties" in the settings. Everything else with the ROM has worked wonderfully, but I believe the Hybrid is the main reason to run this ROM and I cannot access it. Any time i click the Hybrid Properties in settings, I get "Unfortunately, settings has stopped responding." I have reinstalled and wiped factory and dalvik/ caches.
View 2 Replies
View Related
Jul 20, 2013
how do i install paranoid android rom on my karbonn titanium s5 ?
View 2 Replies
View Related
Jul 3, 2012
I'm about to flash Paranoid Android on my GB Note, installing PA is good, but when it comes to gApps, it loads and then stop and says cannot open in sd, aborted.
View 1 Replies
View Related
Jun 29, 2012
I have an HD2 with Paranoid Android (1.4a CM9 NAND), along with Supercharger V6 and Mounts2sd 4.5.0.
I'm experiencing some phone audio issues that pop up and then mysteriously go away again. Specifically I cannot hear the audio from the other caller and the only way to have the conversation is by turning on speakerphone (which always works but is quite inconvenient). The other party can always hear me alright.
Here's some debug log info:
2012-06-28 15:58:46.045 W 722/AudioPolicyManager: getDeviceForStrategy() unknown strategy: 4
2012-06-28 15:58:46.175 E 1191/PrivacyPersistenceAdapter: getSettings - failed to get settings for package: com.csipsimple
[Code] .......
and so I need to enable speakerphone to hear the audio
2012-06-28 16:01:15.755 I 722/AudioHardwareQSD: Routing audio to Speakerphone
2012-06-28 16:01:15.755 D 722/AudioHardwareQSD: Switching audio device to
2012-06-28 16:01:15.755 D 722/AudioHardwareQSD: Speakerphone
[Code] .....
View 2 Replies
View Related
Jun 5, 2012
i left iPhone to enter the android world via the Galaxy note....well, what to say, great change, great device, nice system....
so i decided: i switch to the best, meaning i go to install Paranoid Android....yes, i know there are a LOT of guides and infos everywhere about that, but, what i want to do is just simply applying step by step procedures and give a feed back to you all...what i will do is getting here all the infos related to the Galaxy Note Paranoid android rom and installation, making clear and easy how to do the switch, so any new android user like me could know exactly what to do....
[URL]
View 2 Replies
View Related
Aug 5, 2013
I am running pa_skyrocket-3.57-10JUN20130131650 and pa_gapps-full-4.2-20130719-signed on my ATT Samsung Galaxy SII Skyrocket.
I like the PIE features, but the status notifications don't show up if PIE gravity is set to anything besides the bottom. I get the "back", "home" and "multitask" buttons. When it is set on the bottom, I also get the time, battery info, date and any notifications. How to enable the missing status notifications when PIE gravity is set to anything besides the bottom?
View 1 Replies
View Related
Feb 2, 2012
I recently upgraded from honeycomb to Ainol's ICS version. I accomplished this using the normal flash method with the update.zip file copied to my 16G Mini SD. After the Rom update I installed several programs using ADB shell. I was having difficulty getting titanium backup to work and decided to upgrade my Rom to 4.0.3. I used the same method to flash my device with the update.zip file on my SD card. After the power up I get the android robot then the reboot but there is no change to the version of my Rom. I did a factory reset to my device. After the reset my device no longer had any of my previous installed apps but the version indicated in the settings is still 4.0.1. I have even attempted to flash back to honeycomb but no change occurs to my device. I then try to flash using CWM but I cannot get it to install on my device.
View 1 Replies
View Related
Feb 12, 2013
Is there a way to remove the cursor from the paranoid 2.99 because it is anoying ?
View 2 Replies
View Related