General :: Ainol Novo 7 Paladin - Unable To Boot And Recover

Mar 12, 2012

i have problem with my Novo 7 Paladin. One week ago i installed Google Maps update. After that my tablet was very strange. Sometimes when it go to sleep it won't wake up. I had to press power on again. Later that week there was some graphical glitch on screen (blinking colors). And now i can't boot at all. So i tried the SD card method to recover system. The problem is that i can't boot. Combination of keys like VOL+ and POWER or VOL+ and RESET doesn't work. Then i tried the original USB Boot Tool from Ainol. This tool doesn't work either.

USB Boot Tool

1) install correct USB drivers (press VOL+ and plug USB) select drivers from tool/drivers/4770

2) unplug USB and start USBBootTool.exe

3) press VOL- and plug USB

4) it says BOOT... please waite0% (attachment boottool.JPG)

5) after some time of waiting the error apears (attachment boottool2.JPG)

General :: Ainol Novo 7 Paladin - unable to boot and recover


General :: Ainol Novo 7 Paladin USB OTG Doesn't Work

Nov 27, 2013

I'm having a problem with my Paladin. I bought USB OTG cable and it look's like it doesn't work. When I connect any of 3 pendrives only one will blink but still no result in tablet.

I've tried running it many times but without luck. USB OTG Helper shows theres No Drives Found!. I saw person got it working: [URL] .... but I cannot understand, how to get it to work ?

View 1 Replies View Related

General :: MIUI For Ainol Novo 7 Elf

May 10, 2012

Is MIUI available for the novo 7 elf? Or has it been ported to it?

View 1 Replies View Related

General :: Ainol Novo 9 Spark (12V Charger Instead Of 5V Chrager)

Sep 26, 2013

i accidentally plugged in a 12V instead of original 5V charger in my brand new Ainol Novo 9 Spark today..

Screen stays black if i try to boot it and its not charging anymore if i plug in the original 5V charger

Is there anything i can do or should i just throw it into the trash?

View 1 Replies View Related

General :: How To Set (change) HDMI Mode For Ainol Novo 7 Adv

Jan 30, 2012

I have Ainol Novo 7 Avdanced tablet with Allwinner A10 CPU and Mali-400 GPU. It's HDMI output equipped tablet. I would like to change (to lock) HDMI mode from 720p60 to 720p50 or 1080i50, because my TV doesn't support any xxxp60 mode. Is it possible to do somehow?

View 5 Replies View Related

General :: Ainol Novo 8 Advanced MINI Tablet 7.85 Stock Rom

Dec 27, 2013

the stock rom and instructions of it? got bootloop.

View 4 Replies View Related

General :: How To Install Jelly Bean 4.1.1 On Ainol Novo 7 Tornados

Sep 11, 2012

I just bought an android tablet: 7" Ainol Novo 7 Tornados

How can I install Jelly Beans 4.1.1 on this tablet ? Should I just download jelly beans 4.1.1 copy for google nexus 7 and install that on this ? will it work ? is it ok to install an OS that is for different tablet ? My tablet is also 7 in...

Specs of my tablet:

Production Configuration
Model Ainol Novo7 Tornados Black color
OS Android 4.0.3 ICS
GPU Mali400
CPU ARM Cortex A9 Amlogic8726-M3L 1.0GHz
RAM DDR3_1G
Storage Capacity 8GB
Storage Expand UP TO 32GB
Screen 7.0 inch, capacitive multi-touch screen hd resolution of 800*480

[Code]...

View 2 Replies View Related

General :: Ainol Novo 9 Spark Locked Bootloader On Paranoid Android 3+?

Jun 23, 2013

I have installed the paranoid android 3+ rom but now I cannot access TWRP or the bootloader screen. Android boots normally and the tablet is perfectly functional. When the tablet is off, there is no way to get to TWRP using the keys (power on with Vol- pressed etc. I have used all possible combinations). Also, there is no option to boot into recovery mode from the menu in "Backup & reset". Also, when I try to boot into recovery through a terminal emulator it again boots into andoid normally as if I just did a normal reboot. The "reboot recovery" command issued from the terminal emulator does not boot into TWRP. Trying to boot into recovery mode from within Phoenix Suite again boots the machine normally rather than in recovery mode. It's driving me nuts. Could it be a corrupt/locked bootloader? Is it something else? It seems to me that the only possible path for the bootloader is to load Android.

Is there any way to blind flash the bootloader again? It seems that this is the culprit since I can copy TWRP to nandg through the terminal emulator ("cat /extsd/recovery.img > /dev/block/nandg; sync; sync ;sync" but then again rebooting goes into android rather than recovery mode.

The tablet connects normally through USB to my PC and adb sees it properly.

View 4 Replies View Related

General :: Installed Wrong Firmware For Ainol Novo 10 - Touchscreen Inverted

Jul 26, 2013

I've buy ainol novo 10 hero quad a few month ago. Few days ago when I was flashing the firmware But i've instal the wrong firmware from Ainol novo 10 Ethernal. It onn's but the touch screen was "crazy" it was inverted, to push the button on the down left corner of the screen I must touch in the same spot in the upper right corner, to scroll home screen right I must slide my finger left e.t.c.

View 6 Replies View Related

General :: How To Access Recovery Mode Of Ainol Novo 8 Advanced MINI Tablet

Jan 25, 2014

I cannot access the recovery mode of Ainol Novo 8 Advanced MINI Tablet. I tried holding power + vol+ button but its not working,

View 2 Replies View Related

General :: How To Recover From Boot Loop

Nov 15, 2013

How to recover from bootloop?

My phone is a Starmobile Icon (a rebanded i-mobile IQ1.1).

It happened when i installed the Chainfire3d.

i dont have any backups yet

View 9 Replies View Related

General :: How To Recover From Boot Loop On XOLO Q1000 Opus

Apr 10, 2014

The recent update on my Xolo Q1000 opus was making the device unstable so i got an older update.zip from a post on XDA and tried to install the same using the "software update"option in about device menu in settings,

i was getting the error assert failed: !less_than_int(1320917475, getprop("ro.build.date.utc")) , on googleing around i figured that i needed to change the build.date in build.prop on my phone, i did that and restarted the hone , have been stuck in boot loop ever since ,

i dont have CWM installed, as the same is not available anywhere for Xolo Q1000 Opus , which is a broadcom device, my phone is rooted, how to revocer from the boot-loop.

View 2 Replies View Related

2.1 Update :: Unable To Recover Contacts

Nov 25, 2010

I followed all of the instructions and backed up my contacts using the downloaded most recent update service. Now i have updated my phone to android 2.1 and i try to recover my contacts. in the update screen it went to 97% and then an error. But realistically it has only imported say 30% of my contacts, and the contacts it has recovered it has duplicated so there are 2 entries for every piece of information. Can someone from SE please inform me whether they are working on a fix that we can download that will rectify this issue or do i need to manually source all of my contact information all over again. If so is there any way of loading the backup information on the computer?

View 1 Replies View Related

Motorola Milestone : Unable To Recover Data Connection / Way To Fix

Jan 11, 2010

This usually happens after some wifi activities, but i've noticed that whenever my wifi fails to connect or sometimes even when i disconnect from a wifi server, i lose my data connection (im operating on edge with rogers).

This can usually be solved if i restart my phone but obviously thats not ideal. anyone else have this problem? is it a known issue?

View 6 Replies View Related

General :: Unable To Boot Into CWM With Sanei N10 Tablet

Jan 13, 2013

I am currently trying to flash my new Sanei n10 tablet with CM10 and it is proving much more difficult than I first imagined.

My main problem seems to be that the device just does not want to boot in CWM. I have installed the latest version of CWM (found here) via the Terminal Emulator but it doesn't boot into CWM Recovery, but rather just boots normally. I have also tried using the hard keys to boot into it but all that does is boot me into the default android system recovery (3e) which is useless as it will only update from verified roms.

The device is rooted and I have ROM Manager installed. I have given Terminal Emulator superuser permissions... It just doesn't seem to want to boot into CWM Recovery. I have tried using both ROM Manager as well as NOVO7 Tools to boot into it but I get the same results (device just reboots normally)

I think that it might be something to do with the stock ICS 4.0.4 that came with the device.that is causing me so much hastle.

View 1 Replies View Related

General :: Unable To Boot LG Optimus G Into Recovery

Mar 28, 2014

I'm having trouble booting my LG Optimus G into recovery mode. I've rooted the phone and installed ClockworkMod recovery. When I try to boot into recovery, either from the ROMmanager app or by holding Volume Up and Power, it comes up with the LG logo and gives this error: Secure Booting Error! Cause: boot certification verify. It just stays like that until I press and hold the power button again until the phone shuts off entirely. Then I'm able to boot into the stock operating system and the phone works fine, but I can never get it to boot into recovery.

The error I mentioned above seems to be a well documented error on the internet, but it seems like other people that are having the trouble are completely bricking their phones. Mine is able to come out of it. All the solutions I'm finding pertain to a phone that's completely bricked and involve taking the phone back to stock. My phone works fine with the stock ROM, but I'd like to play with some custom ROM's.

View 2 Replies View Related

General :: Unable To Boot / Can't Have Partition Outside Disk

Feb 1, 2013

i'm having trouble to boot my desire S..i tried to install some new roms, but something web wrong: usualy i had the following partitions:

/dev/block/mmmblck0p25 -> cache
/dev/block/mmmblck0p26 -> system
/dev/block/mmmblck0p27 -> data

al of them ext3, but now if i log in with adb i'm able to mount anoteher partition /dev/block/mmmblck0p28 -> witch in some point was montend on /system/lib and is ext4

now if i adb shell: parted /dev/block/mmcblck0 i becom the error: Can't have a partition outside the disk.my asumtion is that some rom flashing wrote somting were it shoudn't. if i format using fastboot, (i'm not sure if this is posible www_ omappedia.com/wiki/Android_eMMC_Booting ) i'm preaty sure i'm formating also x-load and bootloader.

View 1 Replies View Related

General :: Unable To Boot Into Fastboot Mode On Nexus 10

Nov 28, 2012

I have tried holding down the volume buttons and power button several times the past three days and nothing. The device vibrates and nothing happens. If I continue to hold the buttons then it vibrates every 6-7 seconds. I also tried to get into fastboot using a toolkit in our development section with no luck. The toolkit says I'm in fastboot when connected, but nothing is on my screen.

At this point I am at a complete loss. If I can't get it to work is that a valid reason for replacement by Google?

View 5 Replies View Related

General :: Unable To Boot Into Recovery On Karbonn A111

Jun 24, 2013

I am using Karbonn a111, I have rooted it and then i was trying to flash CWM recovery uning mobile uncle tool. but its was not able to do this , every time it booted into stock recovery.

Then i tried to flash "CWM5.0.2.8recovery " using fastboot. After that my phone stopped to boot into recovery mode. Even my phone is not allowing to do phone reset in phone setting. How to rectify it and how to install CWM recovery.

View 2 Replies View Related

General :: Shutdown Makes Phone Unable To Boot Without PC

Jan 21, 2013

After unlocking my phone's bootloader and flashing the kernel:

When I power off the phone, it gets into a state where I cannot control it by itself (black screen, no charging light if connected to a power source, does not react in any way to any key).

However, I am able to access it via adb over USB. Using adb, I can put it into some other state (reboot, reboot bootloader, etc) and again gain control over it (also through its own keys). When I select the "power off" function of the bootloader, it enters this state again.

I can even reboot the phone (also into recovery/bootloader/fastboot) from any state

So I can use the phone, but I can't power it on by itself, which isn't a good situation when I don't have a computer around.

device: HTC One S
ROM: CyanogenMod 10 (device is officially supported by CM10; I used the version I found in the Wiki.)
kernel: The one included in CM10 (had to be flashed manually via fastboot because of restrictions by the device; I flashed the kernel before flashing the ROM)

View 9 Replies View Related

General :: PMID10c - Unable To Build New Boot IMG File?

Oct 9, 2013

I am looking to compile a new kernel for this device. I have pulled off the boot.img file from /dev/block/nandc and used split_bootimg.pl to pull apart the kernel and the boot ramdisk. I have used extract-ikconfig to get the kernel config and built my new 3.4 kernel (with modules). So far so good...

I have tried to build the new boot.img file with no avail. My concern is with the original kernel as the new one should be build the same (I think). It looks like it is not compressed as I run the command

file boot.img-kernel

It returns

boot.img-kernel: data

So it is not a Linux kernel ARM boot executable zImage

Is this correct? Can Android boot with this or is the split_bootimg.pl tool not creating the file correctly (it does pull the ramdisk as I have uncompressed it fine! and the file does contain the kernel config)

Ok So assuming I can create a proper boot.img with my built zImage and the old ramdisk, what do I need to do with the modules? Do I update the boot.img on the tablet and copy the modules over to the existing /system/lib/modules? (this appears to not work)

View 9 Replies View Related

General :: Novo 7 Basic Stuck With ICS 4.0.1 Version?

Feb 2, 2012

I recently upgraded from honeycomb to Ainol's ICS version. I accomplished this using the normal flash method with the update.zip file copied to my 16G Mini SD. After the Rom update I installed several programs using ADB shell. I was having difficulty getting titanium backup to work and decided to upgrade my Rom to 4.0.3. I used the same method to flash my device with the update.zip file on my SD card. After the power up I get the android robot then the reboot but there is no change to the version of my Rom. I did a factory reset to my device. After the reset my device no longer had any of my previous installed apps but the version indicated in the settings is still 4.0.1. I have even attempted to flash back to honeycomb but no change occurs to my device. I then try to flash using CWM but I cannot get it to install on my device.

View 1 Replies View Related

General :: Unable To Boot In Recovery Mode - Sony Ericsson X10 Mini

Mar 19, 2012

I am using sony ericsson x10 mini mobile phone. I want to install custom ROM cyanogen 7 gingerbread. But I am facing problem while booting this in recovery mode. I have tried the following.

downloaded custom rom for xperia mini and copied in to sdcard

installed ROM Manager Premium (not purchased, downloaded from google search and it is working fine)

installed root explorer S1 tool

Rooted from superoneclick

downloaded xRecovery and copied into system folder

Flash tool - showing bootloader unlocked, and dont know how to flash phone.

msm7227 - used for unlock boot loader

I have rooted my phone successfully, all above things did successfully, when i am trying to boot my phone into recovery mode then it is not boot in that mode instead it boots in normal mode. What I am doing when phone starts and sonyericcson appears then i continuously pushing button many times but it boots in normal mode. So what I have to do to boot my phone in recovery mode. I have read and tried many guides in your forum but nothing works.

View 7 Replies View Related

General :: How To Root Ainol Nova 9 Spark

Apr 10, 2013

How to root ainol nova 9 spark.

View 1 Replies View Related

General :: Ainol Hero 2 Touchscreen Inverted

Aug 10, 2013

Few days ago when I was flashing the firmware But I've instal the wrong firmware from Ainol novo 10 Ethernal. It onn's but the touch screen was "crazy" it was inverted, to push the button on the down left corner of the screen I must touch in the same spot in the upper right corner, to scroll home screen right I must slide my finger left etc.

View 1 Replies View Related

General :: Kernel Compile For A10 Ainol Aurora?

Jun 10, 2012

I'm trying to compile kernel for A10 Aurora i have a couple of questions.I'm using this guide for make a custom kernel.Compiled allwinner-v3.0-android-v2.Btw my laptop is running ubuntu 32 bit 2 cores 30gb hdd on VMware workstation.

I made zImage, uImage and modules without getting any errors but how to flash them to the device?Using adb? making boot.img making cwm zip how to pack them?

Code:
OBJCOPY arch/arm/boot/Image
Kernel: arch/arm/boot/Image is ready[code]....

View 4 Replies View Related

General :: Ainol Elf Tablet Keeps Resetting And No Internal Storage

Jun 7, 2012

How do I fix my Ainol Elf tablet? It keeps resetting and no internal storage.

Last night I installed busybox onto it. When I started it up this morning, I found it had gone and reset itself. (Goes back to default chinese language, all apps and settings gone) On top of that, it says there's 0.00 bytes of internal storage left. I can seem to install very small apps (less than a couple of megabytes) but nothing bigger than that.

Perhaps the most annoying thing is that when you restart, it resets again.

PS I did find this post: [URL] ....

Specifc Details on the elf tablet:
-runs ICS4.0.3
-Allwinner a10 1ghz cpu
-mali400 gpu

View 1 Replies View Related

General :: Ainol Spark Firewire Touchscreen Not Working

Jan 28, 2014

i upgrade unoficial rom,and when i restarted the touchscreen not working.

I have searched and installed a lot of original and custon roms,but it continue not working.

My tablet is Ainol novo 9 spark firewire a31 allwinner

View 1 Replies View Related

General :: Ainol AX1 Poseidon Quad Core Dual Sim Rebooting Usually After Connecting Charger

Jan 13, 2014

Bought the Ainol AX1 Quadcore Dual Sim from Aliexpress. Everything is fine on it except that it reboots every now and then. It usually happens after charging. The reboot that happens is shorter than the normal manual reboot. I'm thinking that an upgrade may work but I do not know where or how to upgrade this device. I have an Huawei G300 Android phone that informs me automatically if an upgrade is available. For this tablet, an upgrade can only be done by downloading an upgrade file and loading it manually?

View 1 Replies View Related

HTC Eris :: Unable To Restore And Boot

Jun 27, 2010

I tried flashing back to an older rom I used before, but this time it said there was an error and wouldn't work. I tryed doing a restore and that didnt work either. Now when i try to reboot, it just gets stuck on the 3 skateboarders. And when i try to go into recovery it just shows the triangle with an exclamation point, instead of the old menu I used to have. Is it fixable or did I brick it?

View 11 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved