Android :: Ubuntu - Device Debug?
Jun 27, 2010
I have a HTC Desire which i would like to debug and run my Android application on. But when i in Eclipse gets the Window where i can choose between devices my HTC Desire is listed with only questionmarks (???).
I have tried this:
Enabled USB Debugging on my device and enabled debugging in my application Manifest.xml file.
In Terminal i have do this:
1. Log in as root and create this file: /etc/udev/rules.d/51-android.rules.
2. SUBSYSTEM=="usb", SYSFS{idVendor}=="0bb4", MODE="0666"
3. sudo service udev restart
View 1 Replies
Mar 15, 2010
I can't get Ubuntu 9.10 to recognize the Nexus One as a debug device. I tried following the instructions found here but they are not working: http://alan.lamielle.net/2010/01/22/nexus-one-usb-in-ubuntu-9-10
Anyone know of a link or know how to get the Nexus One to debug correctly in Ubuntu 9.10?
View 4 Replies
View Related
Nov 1, 2012
In Ubuntu, I have double checked the udev rules. They all look perfect. (I cross checked using another phone too). The USB debug mode doesn't show up no matter what. And I have the adb_usb.ini in the right place. I have tried running all possible combinations of running adb, adb start-server as root. But
Code:
adb devices shows no devices at all.
However, with the USB debugging option enabled on phone, it worked on Win7 after windows installed a Common handset driver.
If I go back to Ubuntu without disconnecting the cable and do
Code:
$ adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
1234567890ABCDEFdevice
The product id is 1234567890ABCDEF and I am able to see it and everthing works fine!!But the moment I disconnect the USB cable, its gone.
So I guess it's not the development machine that is at fault. The device seems to be setting a property while in Windows which stays latched till the usb connection goes off.
Btw the Code:
/data/property/persist.service.adb.enable is 1 too.
View 9 Replies
View Related
May 9, 2009
I have a problem when trying to see use the Android for development on Ubuntu. The device is shown as offline. Although it detects the device.
when I type % adb devices List of devices attached HT845GZ50600 offline
I am using: Ubuntu 9.04 (Jaunty)
Few things I tried:
1. I have changed the 50-android.rules file and reloaded the udev. [ as suggested by docs] 2. 51-android.rules ( if there was another 50 then this would have worked) and it worked for some users [ diff thread in the forum] .
2. I also killed adb server and restarted it.
3. It works on Windows, but I want to develop on Ubuntu ( and curious why it doesnt work).
View 2 Replies
View Related
Oct 30, 2009
Just finished upgrading from Jaunty to Karmic, and my ADP1 doesn't show up in "./adb devices" anymore. I have tried the solution proposed here (http://groups.google.com/group/android-developers/msg/ 7f3990c5d5367dbb) but it doesn't work for me. Phone is also missing from the "lsusb" list, although I find that I can actually mount the sdcard.
View 4 Replies
View Related
Jun 11, 2010
I've been developing on the simulator, but now I have a real device.
adb can see the device (from adb devices), and I've installed Eclipse/ ADB.
I can't work out how to get debug to use the device instead of the simulator though.
View 2 Replies
View Related
Jun 5, 2010
I'm new to Android development, and am attempting to run a test application on my actual device. I followed the instructions at http://developer.android.com/guide/developing/device.html (and related links), but the Android Debug Bridge (adb) doesn't recognize my connected device.
Some quick background info, I'm running WinXP, developing with Eclipse, with a Motorola Droid running Android 2.1 as my physical device.
An overview of the steps I've taken: Installed the Android SDK, downloading all necessary packages. Enabled USB Debugging on my device. Connected Device via USB, installing the driver from the SDK folder.
I'll stop here (though I continued to setup my application to be debug-able in Eclipse), because I at this point I noticed a problem.
Running "sdkoolsadb devices" at this point (at least, by my understanding), should list my device as connected. However, running this yields only: List of devices attached
My device recognizes that it's connected to a computer in debug mode, and my computer recognizes the device. However, I can't seem to get the sdk to recognize it. I'll leave out the steps I used to setup Eclipse for debugging on a device, as it doesn't seem relevant to the problem. I'll include them if requested.
View 4 Replies
View Related
Sep 1, 2009
I just updated my Ubuntu Linux box to Jaunty (9.04). Initially, I had same problem everyone else has on Jaunty i.e. adb doesn't see the device: http://groups.google.com/group/android-developers/browse_thread/threa. I followed the instructions and 'adb devices' lists my device just fine now, but Eclipse/ADT won't load my app or run it on the device. Every attempt at execution runs on the Emulator. I get the following message in the console: [2009-08-31 21:01:39 - KeyDirector] Automatic Target Mode: Preferred AVD 'avd15' is not available. Launching new emulator. Anyone have ideas on what might have caused this? I tried deleting and re-building the 'avd15' but it didn't help.
View 2 Replies
View Related
Oct 1, 2009
I developer a android app. Today I get the HTC hero for testing. I installed the driver and can start the app on the device. The problem is that I need a network connection. I am connect via usb to my desktop computer. Can the device that is on usb connect use my i-net connection to send a request?
View 2 Replies
View Related
Jul 10, 2010
I have set up a "Debug Configuration" to debug my Android project. However to get it to debug on a device (HTC Desire) I have to set the Configuration's "Target" to "Manual", there seems to be no way to set in the Debug Configuration that it should go to a selected Device.
It does work, but each debug session I have to "Manually" choose the HTC device from the dialog. Can I set it to always to go the Device?
View 1 Replies
View Related
Oct 5, 2010
I'm trying to develop an android application that uses network connection. The server is up and running, but when i am trying to access it from the device that runs the android app (in debug mode-using eclipse) it outputs a message that 'cannot find the server' after a UnknownHostException occurs! I have tested the server with a java application and it works fine! What is the problem then with the device?
View 1 Replies
View Related
Jul 10, 2010
When I'm using the device and click on my debug the application is lunched in my device but I cant see the break points .
In the debug window the application whom run is shown for a second and then disappear and I cant debug my application on the device .
Did I miss something ? can someone please explain me what I did wrong and correct me
View 1 Replies
View Related
Dec 5, 2009
I need test my Android app on a Motorola Cliq but don't have one. Is there a testing service that will let me make a debug connection to that device so I can run some tests and find out where the code is failing. Video connections won't tell me that.
View 2 Replies
View Related
Feb 17, 2010
I uploaded my application to Market and then downloaded it to my phone. Now I'm unable to use debug keystore which is used by default by Eclipse ADT Plugin (Re-installation failed due to different application signatures) and when I'm trying to setup own keystore in Eclipse->Windows->Android->Build->CustomDebugKeystore, I'm unable to enter password or accept keystore and type password later. Is there anything I can do or only way do debug app on device is to uninstall market version and deal with default debug keystore?
View 3 Replies
View Related
Mar 9, 2010
What kind of permission/Flag do I have to add to the manifest to debug my application on an actual Android device?
View 1 Replies
View Related
Jan 28, 2014
I have a completely broken screen/lcd/digitizer on my Samsung Galaxy S3, debug mode was not on. The phone works as it will still vibrate when turned on and the LED / Menu / Back buttons light up during a boot. USB connector works as well. The phone was not previously rooted.
I had most important data on the sd card and I've already wrote off any other data on the phone as I've since moved on to a GN2. I would like to make use of the S3 (not necessarily as a phone but a server, security camera, etc.). I've read several posts here about my options and looked at numerous google articles, all seem to require debug mode being on or assume/require the data/OS must remain as this is what the user is trying to recover. I do not care if all data is lost on the phone, I just want to make the device useful again.
Am I out of luck if debug mode was not enabled or can I flash through adb via some obscure mechanism? Also note that fastboot is not an option here as the S3 (samsung) does not have it enabled. I am unable to get into "Download Mode" as I cannot see info on the screen.
View 5 Replies
View Related
Jul 6, 2010
I have tried with zero success to get a USB debug connection from a WinXP dev box to a brand X Android 1.6 tablet. I believe I had everything configured correctly on the Android and installed correctly on the dev box, but when the two are connected with a USB cable NOTHING HAPPENS; i.e. Windows finds no new hardware much less a new USB device; therefore, I cannot then install the Android SDK USB drivers on Windows and do the debug thing with Eclipse.
Either the mfg of the Android tablet device has disabled USB debugging and just didn't remove the UI that appears to enable it -- or I've left out some crucial step(s). (The device manual is 100% Chinese and I'm 0% Chinese, so it's no help. The tablet is very nearly, but not, the model A84 7" touch screen 'laptop' at 'www.lezestar.com' in case this helps.)
On the tablet:
- 'Settings/Application/Development/USB Debugging' is enabled.
- Tried 'Settings/Application/Development/Allow mock locations' enabled and not.
- Has 500MB internal flash 'hard disk'
- Has installed 2G SD card
- Firmware: 1.6
- Kernel: 2.6.29-002360g4f8dbbb-dirty
- Build No: 1.7.3
On Dev box:
- Windows XP SP3
- Device Manager finds no 'new hardware' when XP<-->Android USB cable is connected.
- Neither USBDeview.exe (Nirsoft) nor USBView.exe (Microsoft) find any evidence of connection with the Android
- Eclipse Galileo (3.5.2) with Android SDK (for 1.6) and ADV Manager.
- USB Driver package, rev 3. downloaded using ADV Manager.
Other:
- USB ports on both Tablet and dev box successfully connect a USB mouse.
- Tablet and Windows XP have been rebooted often.
Is permanently disabling debugging something that Android manufacturors are allowed to do and therefore I'm trying something that can't be done?
If the mfg has 'disabled' debugging, is there a way to work around this; e.g. download a tool that can change Android OS configuration to reenable it?
View 2 Replies
View Related
Jan 22, 2010
I have a brand new Nexus One. I'm trying to follow the directions for installing the USB driver. When I plug in the device, it doesn't start the New Hardware Wizard, as the documentation suggests. I can run hdwwiz.exe to launch it and manually install the driver, but when I do, Device Manager says: "This device cannot start. (Code 10)"
View 4 Replies
View Related
Sep 26, 2009
For others who might choose to do debugging on CLI , here's how.
View 2 Replies
View Related
May 1, 2009
Has anyone been able to get the sdk version 1.5 to work with Ubuntu 9.04 (64 bit)? I have tried the upgrade from and it fails with: Eclipse throws a "An SWT Error has occurred" message then I get a second dialog saying: pingUsageServer failed Android SDK Ping pingUsageServer failed. Anyone else getting this? I tried to do a reinstall of the sdk and eclipse and I have the same issue. Everything worked great with SDK 1.1 R1. Any help would be greatly appreciated.
View 9 Replies
View Related
Oct 26, 2009
It appears as though the emulated GSM portion of the android emulator is not working on my system. After scouring the web I have yet to find anyone with information about what might be causing the problem. When I fire up my avd (any avd), it says "No Service" If I go to Settings -> Mobile Networks -> Network Operators, I get an error message: "Error while searching for networks" I am running Ubuntu 9.04 x64 desktop edition. I have SDK 1.6r1 downloaded. I'm hoping this is a simple thing to fix.
View 5 Replies
View Related
Apr 29, 2009
Is Ubunto 9.04 compatible with development in Android? Before i ugrade, deploy on device was normal. Now, using 9.04, doesn't recognize it using "adb devices". This below is already set on my ubuntu: 1. Login as root and create this file: /etc/udev/rules.d/50- android. rules.
For Gusty/Hardy, edit the file to read: SUBSYSTEM=="usb", SYSFS{idVendor}=="0bb4", MODE="0666"
For Dapper, edit the file to read: SUBSYSTEM=="usb_device", SYSFS{idVendor}=="0bb4", MODE="0666" 2. Now execute: chmod a+rx /etc/udev/rules.d/50-android.rules
View 8 Replies
View Related
Nov 27, 2009
I have installed Karmic Koala (Ubuntu 9.10) and have installed Eclipse 3.5 (Galileo) on the same. When I tried to install ADT, I am getting the following error message:
"Cannot complete the install because one or more required items could not be found. Software being installed: Android Development Tools 0.9.4.v200910220141-17704 (com.android.ide.eclipse.adt.feature.group 0.9.4.v200910220141-17704) Missing requirement: Android Development Tools 0.9.4.v200910220141-17704 (com.android.ide.eclipse.adt.feature.group 0.9.4.v200910220141-17704) requires 'org.eclipse.gef 0.0.0' but it could not be found" Can someone point me to where I can find this missing plug in?
View 7 Replies
View Related
Jul 30, 2010
This is my first post and it should be an interesting one. Today I was trying to install Ubuntu on my rooted Galaxy S Vibrant. But, When I was moving the Contents of the download to my SD card, I realized that I didn't have enough space. I had a 2 gig SD card and the contents were just over 2 gigs (Plus the SD card really only had about 1.9 gigs) so obviously THAT wouldn't work. So I asked around and someone said that they had dropped the ubuntu contents into the internal memory instead of the SD card on their Moto DROID. Basically I am wondering if it is possible to do the installation process through my 16gb internal memory instead of the sd card. So for example in the guide telling you how to install ubuntu on android where it says to access the files for installation, they wouldn't be in the SD card, they would be in the internal memory.
View 10 Replies
View Related
Jan 25, 2009
I shut down my PC (running Ubuntu 8.10, fully updated) overnight and when I booted the following day, 'adb devices' failed to recognize my stock, OTA-updated, RC30 G1. I followed the instructions listed here:
http://code.google.com/android/intro/develop-and-debug.html#developin...
evan@evan-desktop:~$ cat /etc/udev/rules.d/50-android.rules SUBSYSTEM=="usb", SYSFS{idVendor}=="0bb4", MODE="0666" evan@evan-desktop:~$ adb kill-server && adb devices
* daemon not running. starting it now *
* daemon started successfully *
List of devices attached emulator-5554 offline
To answer some preliminary questions:
- Yes, I have my phone on.
- It's on a USB 2.0 port.
- Yes, it sees the emulator(s), but not my device.
- Yes, "USB debugging" is enabled on the phone (and I tried toggling it).
- I've rebooted both the phone and the PC.
- I'm using the latest the 1.0_r2 SDK from the site.
- I'm on 64-bit Ubuntu, but it also fails to work in my 32-bit VM (that also previously worked)
View 3 Replies
View Related
Nov 5, 2009
During my very short time experience with Android, I found that Linux is most suitable environment for development compared to Windows. Please correct me if I'm too inexperienced. My question is, Which version of the Linux is best suitable. [Redhat/Fedora/Ubuntu..] Please let me know. Is Linux version really matters.
View 6 Replies
View Related
May 3, 2010
Was not able to launch the emulator on Ubuntu 10.04. Getting the below error in eclipse. Is there a work around or a fix for this?
[2010-05-02 23:35:34 - HelloWorld] Automatic Target Mode: Unable to detect device compatibility. Please select a target device. 2010-05-02 23:35:39 - HelloWorld] Launching a new emulator with Virtual Device 'android15' [2010-05-02 23:35:42 - HelloWorld] New emulator found: emulator-5554 [2010-05-02 23:35:42 - HelloWorld] Waiting for HOME ('android.process.acore') to be launched... [2010-05-02 23:35:43 - emulator] XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0.0" [2010-05-02 23:35:43 - Emulator] after 7 requests (6 known processed) with 0 events remaining. [2010-05-02 23:35:43 - HelloWorld] emulator-5554 disconnected! Cancelling 'com .paad.chapter2 .HelloWorld activity launch'
Is this a known issue with the 10.04 Lucid lynx ubuntu? You received this message because you are subscribed to the Google Groups "Android Developers" group.
View 5 Replies
View Related
Aug 6, 2010
When I trying run Android Emulation, i Have error message:
$ tools/emulator -avd Default -verbose -debug-all
emulator: found SDK root at /opt/android-sdk-linux_86
emulator: /home/jupeter/.android/avd/Default.ini: parsing as .ini file
emulator: 1: KEY='target' VALUE='android-8'
emulator: 2: KEY='path' VALUE='/home/jupeter/.android/avd/Default.avd'
emulator: /home/jupeter/.android/avd/Default.ini: parsing finished
emulator: root virtual device file at /home/jupeter/.android/avd/Default.ini
emulator: virtual device content at /home/jupeter/.android/avd/Default.avd
emulator: /home/jupeter/.android/avd/Default.avd/config.ini: parsing as .ini file........
View 1 Replies
View Related
Jun 28, 2010
I just wanted to run my first android application, but unfortunately in my AVD i don't see anything, just 'ANDROID_' and not my 'Hello, World' which i tried to display. I don't know where the issues is and I tried to search this Discussion as well. In my AVD Manager I created on AVD named it 'TestDevice' platform 2.2 etc. and even if I start it there I just get the letters 'ANDROID_' and noting else even the home button won't work.
View 2 Replies
View Related
Oct 13, 2010
After upgrading Ubuntu to 10.10, my android projects in Eclipse stop working.
Lots of people seem to have this problem: http://forum.xda-developers.com/showthread.php?p=8591101
please, has anyone got a solution?
View 2 Replies
View Related